View Left Column
137 products
Grid
Grid-2
List
List-2
Catelog
£24.71Price
Chrome Vanadium steel 1/2"Sq drive sockets. Includes pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.
£24.71Price
£24.85Price
£25.11Price
Kit consists of adaptors with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons. Helps prevent damage to pistons and seals.
£25.11Price
£25.82Price
Twin handles provide even force for accurate pipe forming. Slender design allows pipes to be shaped in situ. Ideal for aluminium, brass, copper and steel pipe. Contoured vinyl grip handles provide extra comfort and control.
£25.82Price
Suitable for most automotive applications. Bends pipe without crushing walls. Will bend Ø6, Ø8, Ø10mm (Ø1/4", Ø5/16", Ø3/8") pipe up to 180°.
£25.82Price
Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.
£27.10Price
£27.26Price
Chemically blackened steel spreader plates. An essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most ATE, Bendix, Delco and Girling calipers.
£27.26Price
£28.70Price
Patented design ensures that the spring mechanism maintains the correct cutting pressure on the pipe at all times. Features a smooth screw action and nickel-plated blade for increased cutting performance.
£28.70Price
£29.41Price
Fast and easy bleeding of brakes including ABS systems and clutch using air from the tyre. Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. Adaptors included; Ø25mm Cap and Seal for Lockheed Systems, Ø27mm Cap and Seal for VAG, Ø44/45mm Cap and 2 Seals (Ø44mm thin/Ø45mm...
£29.41Price
£31.55Price
Vice mounted brake pipe shaping tool, designed for use on automotive applications. Dual stepped sections allow pairing of pipes for correct curvature for uniformed alignment to vehicle. Suitable for 3/16”(4.76mm) cupro-nickel, copper and steel pipe.
£31.55Price
£31.57Price
Enables retraction of the piston on rear brake calipers. Helps prevent damage to pistons and seals. Special low profile design for VAG vehicles.
£31.57Price
£31.89Price
Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. Spring loaded, offset jaws enable easy-access to spring washer located behind wheel hubs. Suitable for cars and light commercial vehicles.
£31.89Price
£31.89Price
Electrolytic tester. Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits. Easy calibration check using water. Three LED read-out. Just switch on and insert probe for immediate result. Red LED warns when battery is low and needs replacing. Powered by 1 x AAA battery (supplied).
£31.89Price
Universal reservoir cap for Model No's VS820, VS821 and VS0204A Brake & Clutch Bleeding Systems. Supplied with quick connect.
£33.47Price
Ø45mm Brake and clutch reservoir bleed cap (2001-2022). 90° Connector with hose for use where access is restricted. Manufactured from aluminium, this adaptor is suitable for pressure bleeding work that requires 1-2bar/14-30psi pressure range. Heavy-duty adaptor covers most vehicles. Compatible with SEALEY brake bleeders VS0204, VS0204A, VS0207, VS820, VS821 and VS0308B.
£33.47Price
£33.48Price
Collection bottle with wide base for added stability. Features a one-way valve to reduce air re-entering the system, clear hose to evaluate the condition of the fluid and presence of air, vent located in the lid and drain cap for simple emptying of old brake fluid. Includes two hanging hooks.
£33.48Price
£35.08Price
Manufactured from high quality stainless steel with a fully polished satin finish. Features double end 72-tooth ultra-smooth ratchet with flexi-head for limited access applications. Ideal for most brake pipe fittings.
£35.08Price
£35.16Price
Four cylinder-honing tools in one kit covering 18mm to 89mm cylinder bores. Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders. Adjustable honing pressure and flexible drive shaft. Kit includes an assortment of 220 Grit stones. Supplied in storage case.
£35.16Price
£35.88Price
Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits. Easy calibration check using water. Five LED read-out. Just switch on and insert probe for immediate result. Works on all grades of brake fluid. Powered by 1 x AAA battery (supplied).
£35.88Price
£37.47Price
One-person brake and clutch bleeder. Bleeding requires no external power source - simply fill and pump. Bottle holds 400ml of hydraulic fluid. Design incorporates pressure control valve set at 20psi. Pressure range makes unit suitable for use with ABS systems. Fitted with Ø45mm cap which is suitable for most European models.
£37.47Price
Simple, one-person operation using standard workshop air supply (90-120psi). Quick, clean and efficient. Does not require specialised brake reservoir caps. Supplied with two bleed lines for twin caliper systems. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.
£43.84Price
£38.58Price
Simple, one-person operation using standard workshop air supply (90-120psi). Quick, clean and efficient. Does not require specialised brake reservoir caps. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.
£38.58Price
£39.87Price
Twin handle provides even force for accurate pipe forming. Sliding mechanism allows quick adjustment for different sized pipes. Capable of bending pipes in situ. Ideal for aluminium, brass, copper and steel pipe.
£39.87Price
£39.87Price
Fast, accurate and simple bending of brake pipe - even on the vehicle. Bends 3/16"(4.75mm) and 1/4"(6mm) brake pipe up to 90°. Forged steel jaws with anti-corrosion finish. Soft grip handles aid comfort and control.
£39.87Price
£40.17Price
Measures drum wear to ensure it is within manufacturer’s tolerance. Also aids quick set-up of shoe/drum clearance prior to re-installation of drum. Measures drums from 165 to 292mm (6-1/2" to 11-1/2"). Dual Imperial and Metric scale. Knurled locking action.
£40.17Price
£41.46Price
Stainless steel caliper suitable for accurate measurement of brake disc thickness. Floating jaw assembly enables easy removal of caliper from disc while retaining reading. Metric scale with 0.1mm graduations. Supplied in storage case.
£41.46Price
£43.84Price
Used for normal brake bleeding with a clear hose to evaluate the condition of the fluid and the presence of air. High Flow twin brake bleed pipes for use on ABS service bleed when two valves need to be opened at once and on calipers with two bleed nipples which are found on high-performance vehicles and motorcycles. Single person bleeding with a 2L collection bottle and a wide base for added...
£43.84Price
£46.25Price
Multifunction diagnostic tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions. Kit also includes reservoir, hoses and adaptors for bleeding brake and clutch systems on cars, commercials and motorcycles. Brass-bodied vacuum pump features large, easy-to-read vacuum gauge displayed in both inches and millimetres of mercury.
£46.25Price
£47.85Price
Innovative dual purpose tool designed to push and wind-back brake calipers. Fast and simple, one-handed use. Lightweight and durable materials enable the tool to work on most common caliper designs. Suitable for use on either left or right-handed wind-back calipers. Supplied with four common adaptors but compatible with all 2-pin magnetic adaptors in the Sealey range, making the tool truly...
£47.85Price
Unique double end design for retracting left and right-handed rear caliper pistons.
£48.81Price