Comprehensive set of flywheel pullers used to separate flywheel from the crankshaft taper. Features 10 pullers of which five have double end, giving increased applications. Suitable for most makes of motorcycle. Supplied in storage case.

Designed for easy installation of fork seals. Limits potential damage caused by other installation methods to the forks.

Heavy-duty cover is ideal for protecting a motorcycle when being transported on a trailer. Waterproof double-stitched and heat sealed seams ensure the motorcycle stays dry. Easy-to-use buckle system secures the cover to the bike in all weathers. Air vents provide airflow while being transported and ventilation while being stored. Elastic hem ensures a tight fit to the motorcycle. Supplied in a...

Quickly and safely lifts and stabilises front or back of motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel maintenance and removal of front or rear wheel. Unit Capacity of 200kg.

Features adjustable pivoting wheel guide, which secures front wheel within chock. Three adjustable heights depending on diameter of wheel. Suitable for wheels with tyre widths 90-130mm and diameters Ø17"-21"(Ø430-535mm). Base can be permanently bolted to the floor (fixings included), and features a detachable upper assembly that can be easily stored and re-attached when required, stabilizing...

Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, gearboxes and differentials. Translucent body allows easy inspection of contents.

Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings). Fully adjustable to fit wheels Ø15"-21"(380-535mm). Minimum/Maximum Tyre Width: 50-130mm. Please note: Motorcycle must also be...

Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range of pins, dies and detailed instructions. Chain link pulling tool is a useful third hand tool for pulling chain ends together while re-linking.

Manual bead breaker, especially suitable for motorcycle tyres. Lever action with parallel linkage keeps head at the optimum angle for breaking the bead.

Heavy-duty cover is ideal for protecting a motorcycle when being transported on a trailer. Waterproof double-stitched and heat sealed seams ensure the motorcycle stays dry. Easy-to-use buckle system secures the cover to the bike in all weathers. Air vents provide airflow while being transported and ventilation while being stored. Elastic hem ensures a tight fit to the motorcycle. Supplied in a...

For easy removal of wheel bearings. Simply choose the correct size collet for the bearing and hammer one of the drifts into the allocated slot. Covers sizes from 10-25mm so will suit most popular motorcycles and ATV/quadbikes.

Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish. Specially designed for use with slotted retaining rings. Hook and pin interchangeable hinged arms with three wrenches covering sizes 19-121mm. Pin sizes Ø4-8mm. Supplied in tough storage case.

A robust steel, powder paint coated, hanger. Can be mounted to your door, wall or wardrobe. An integral, quiet running fan will quickly and conveniently dry your helmet, whilst on the hanger, inhibiting the build-up of damp and odour. Keeps all your motorbike gear in one place. This hanger has an integrated strap that will hold your gloves, and can also be used to hang your jacket, trousers or...

Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to...

Ideal for protection, rain or shine, against weathering and fading. For smaller motorcycle derived trikes such as Virago or Shadow models or newer reverse trikes with two front wheels. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply....

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Features detachable slide hammer for impact removal. The kit includes 12 adaptors to suit different sized pistons.

Fully adjustable robust tool for assisting in the successful separation of the engine crankcases to allow access to the crank shaft, connecting rods and other internal components. Suitable for use on a variety of motorcycle and ATV engines. Supplied in storage case.

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for the larger motorbike derived trikes such as Goldwing or Harley Davidson Triglide types. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic...

Greatly increases stability of the motorcycle by clamping the bottom and front of the tyre, enabling easier securing of the motorcycle to the lift. Suitable for most motorcycle lifts. Some modification may be required.

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of rear wheel. For full floating movement use in conjunction with FPS1MD.

An integral, quiet running fan will quickly and conveniently dry and cool your helmet whilst in the bag. Inhibiting the build-up of damp and odour. Helps prevent the build-up of bacteria, so your helmet smells fresher. Improves the life span of the linings and impact materials in your helmet. The unit is supplied with a USB adapter for connection to your vehicle or to a power pack. Making it...

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of front wheel. Please note: All front paddock stands need to be used in conjunction with a...

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for all VW Flat-four engine based trikes such as Rewaco, Boom and WK models. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic corners with...

Screw-type bridge extractor set. The thin tapered lips on the collets secure a positive grip on the curved surface of the internal bearing bore. Gently removes blind bearings where the use of a slide hammer may damage the surrounding material. Bearing extractor collets with internal capacity from 8 to 27mm.

This motorcycle moving dolly can be used to manoeuvre motorcycles (maximum 300kg dispersed vehicle weight) with centre-stands and is perfect for places where space is restricted. The centre-stand locates on the 4mm thick hardened steel-plate and the 360 degree castors allow the bike to be moved in any direction. Features a foot/hand operated built-in brake mechanism which is ideal for workshop,...