One-handed, compound action grips and strips electric cables 1-3.2mm² automatically. Jaw action prevents crushing or cutting even the finest wires. Supplied with length gauge and fitted with vinyl grips.

Constructed from composite materials and suitable for the extraction of engine or transmission oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with two suction probes and cover cap. Use probes to remove engine oil through the dipstick tube.

Satin finished carbon steel body with 1/2"Sq drive for use with ratchet wrenches. Heavy-duty thin double chain.

Fits over car wing to protect against marking and scratching of the paint finish. Manufactured from water-resistant nylon with a non-slip foam lining. Resistant to water, oil and grease.

Set of four angled tools that allow removal of O-rings and seals without damage. Features contoured and spoon tips.

Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key.

Permits valve stem seal and valve spring replacement without the need to remove the cylinder head. Superior cast design with radiused fulcrum for smooth spring compression. Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo) and Fiesta (inc. RS Turbo).

Combination tool suitable for removing thermo-viscous fan hubs as fitted to BMW, Ford and Vauxhall/Opel vehicles.

Tyre pressure gauge with integral tread depth gauge and worklight. Push-button operation with backlit LED display for tyre pressure. Read-out available in bar, psi, kg/cm² or kPa. Integral tread depth gauge reads up to 20mm. Auto-power -off.

Chrome Molybdenum steel socket with 1/2"Sq drive. Used with air impact wrench running in reverse, deep reverse helix grips locking wheel nut. Ideal for busy fast fit operation. Removal action will distort wheel nut and replacement is recommended. For distribution to bona fide vehicle dealers and repair centres only.

Manufactured from glass reinforced nylon to minimize panel damage and marking. Includes five trim and upholstery tools, plus trim clip removal pliers with spring loaded handles. Supplied in storage case.

Satin finished carbon steel body with 1/2"Sq drive for use with ratchet wrenches. Heavy-duty thin double chain. Essential tool for removing commercial air brake filters.

Set includes two reusable front seat covers. Manufactured from water-resistant lightweight nylon. Ideal for protecting the vehicle's interior from dirt, grease and oil, as well as food and drink spills. Suitable for most cars and light commercial vehicles. Can be fitted to seats with or without airbags. Seat Back (H x W): 850 x 600mm. Seat Base (W x D): 600 x 440mm.

Double end carbon steel keys with satin chrome finish. Suitable for drain plugs on engine, gearbox and back axle. Includes tommy bar. Supplied in storage case.

Features textured high grip steel strap with comfort grip handle and control knob. Removes filters with minimal risk of damage.

Satin finish steel construction with 3/8" and 1/2"Sq drive. Also suitable for use with a 21mm(13/16") spanner. Claws grip filter tighter as more torque is applied.

Suitable for removing and installing oil filters as well as many other applications. Adjustable strap fits filters up to Ø120mm or Ø150mm depending on wrench. Features soft grip handle for added comfort.

Probe tool allows continuity and polarity tests to be carried out quickly and efficiently on 6, 12 and 24V systems. Polarity indicated by red/green LEDs respectively. Supplied with 1.5m cable and shrouded earth clip.

Longer than most other wheel braces on the market, allowing extra force to be applied. Manufactured from carbon steel with chrome finish. Features three popular sizes of wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.

Compact design incorporating integral storage for air output hose. Features a worklight and pressure gauge which reads up to 5.5bar (80psi). Powered by a 12V motor suitable for inflating tyres on motorcycles and cars. Supplied with vehicle accessory socket plug and battery clips.

Essential tools for timing belt replacement on Dacia, Mercedes and Renault, 1.5dCi diesel engines. Supplied with a warning tag and instructions.

Essential tools for timing belt replacement on Renault/Nissan 1.5D dCi diesels. Covers engine codes K9K. These engines are also fitted in Suzuki and Dacia models.

Specially designed spanner and split deep socket to assist in the removal, fitting and adjusting the turbo pressure capsule and turbo actuator on VAG engines. Set includes 1/4"Sq drive socket (10mm x 50mm) and spanner (10mm open-end and 12mm 12-point ring combination). Manufactured from Chrome Vanadium.

Inductive coupling and power lead set. Application: TL85.

Fits a wide range of 1.2 TFSi engines and the newer generation twin camshaft 1.6 TFSi engines. Contains guide pins for aligning the turbocharger. Supplied in a storage case with full instructions and a warning tag.