Updated set of specialist tools for the safe, fast, authorised removal of fitted radios. Supplied in wallet.

All steel construction with anti-slip handles and hardened and tempered jaws. For use on Delphi Weather Pack terminals. Parallel jaw movement ensures consistent crimp tension.

All steel construction with anti-slip handles and hardened and tempered jaws. For use on Superseal Series 1.5 terminals. Parallel jaw movement ensures consistent crimp tension.

Essential for creating an exclusion zone when working on high voltage vehicles.

6-24V Auto Probe with an integral worklight to aid use in dark engine bays plus an audible circuit tester for when the LED on the probe cannot be seen.

All steel construction with large vinyl grip handles and hardened and tempered jaws. Ratchet action ensures consistent crimp tension.

Fully insulated probes have a spring loaded clamp with stainless steel pin that self centres and punctures the insulation. Fitted with Ø4mm banana style connectors and suitable for use with most multimeters and analysers. Suitable for automotive use only, with a maximum input of 50V DC.

Identifies polarity of circuit being tested on LCD display, red for positive and green for negative. LCD meter draws minute currents making this tool safe to use around delicate electronic components. With a range of 3-48V DC, this tool is suitable for motorcycle, car, hybrid and commercial vehicles. Supplied with 3m coiled cable and insulated crocodile earth clamp. Do not use on air bags.

Detects and confirms radio frequency and/or infrared emission from key fobs and remote controls. Helps diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle. Magnetic backing sticks to the side of any ferrous surface for testing the range of the transmitter. Suitable for a wide variety of vehicle manufacturers.

High precision multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Double moulded housing with soft grip case and large display for ease of use. Probe and lead storage. Integral upright stand for use on the workbench. Supplied in zipped pouch with carry strap. Measures: • AC and DC Voltage • DC Current •...

All steel construction with large comfort grip handles, angled head and hardened and tempered jaws. Ratchet action ensures consistent crimping.

Competitively priced EOBD code reader. OBDII/EOBD compliant vehicles Petrol 2001 and Diesel 2004 onwards. CAN enabled retrieves generic P0, P2 and P3 and U10 codes and picks up manufacturer specific P1, P3 and U1 codes. This easy to use tool will then turn off the MIL light, clear codes and resets monitors. Supplied with comprehensive instructions.

Time-saving tool ideal for the automotive electrician and mechanic. Connects to the vehicle’s own battery and reaches all corners of the vehicle with 5m cable. Checks for short circuits and bad earths quickly and easily. Tests continuity and polarity using flying lead and also indicates voltage (2V to 24V) of system on test using an LED array. Power-up components prior to installation and check...

Accurately pinpoints automotive noises and vibrations, which are converted into an electrical signal and amplified. Long pick-up shaft allows use in hard-to-reach places. Features a volume control and supplied with headphones. Powered by 9V battery (supplied).

For use when working on sensitive electronics without causing damage through electrostatic discharge. Large working surface – 900 x 600mm. Durable 2mm PVC which is chemical, oil and abrasion resistant. Four 10mm press stud connectors, suitable for left and right-handed use. Earthed wrist strap and crocodile clip with two 1.7m coiled earth leads included.

36 Tools-in-one. Set of tools for safe, fast, authorised removal of fitted radios. Composite handle allows firm and comfortable grip.

American-style drop tester. Load applied by internal switchgear - no sparking. Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.

Used to preserve the memory to on-board electronics whilst vehicle's own battery is disconnected. Saves valuable time spent re-programming lost codes. Can be connected via the vehicle's EOBD or vehicle accessory power socket. Unit features an internal 12V 7Ah sealed battery and LEDs provide battery condition and charge indicator. Supplied with mains charger.

Find short and open circuits quickly and easily. Simply attach the sender unit to the circuit and follow the wires using the detector. Ideal for automotive repairs. Suitable for all DC circuits up to 42V. Supplied in storage case. Powered by two 9V batteries.

Identifies the polarity of the circuit being tested on the LCD, red for positive and green for negative. Wire hook probe design, makes piercing wire insulation easier, the hook can be locked out of the way when probing terminals. LCD meter draws minute currents making this tool safe around delicate electronic components. With a range of 3-60V DC, this tool is suitable for motorcycle, car, mild...

Permits easy removal of over running alternator pulley either on or off the vehicle. Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut.

Lightweight, compact digital multimeter with double moulded plastic housing and a 4000 counts LCD display. Drop-proof up to 2m. IP65 rated as "dust tight" and protected against low pressure water jets (all directions). Features display back light and forward facing worklight. Conforms to EN 61010-1 and EN 61010-2-033 CATIII 600V safety requirements for electrical equipment for measurement,...

Suitable for the removal of vehicle computer connectors and terminals. Designed for GM C3 systems, this 12-piece kit has a general application for safe and fast removal of terminals on a wide range of vehicles. Colour-coded aluminium handles make for easy identification. Supplied in storage case.

Lightweight, auto-ranging digital multimeter with double moulded plastic housing and a 2000 counts LCD display. Features forward facing worklight, data-hold and non-contact voltage detection. Conforms to EN 61010-1 CAT IV 600V safety standard. Measures: • AC and DC Voltage • AC and DC Current • Resistance • Diode Test • Continuity Test • Non-Contact Voltage Detection (NCVD) • Forward Facing...

One-person operation, suitable for turning the engine over for various diagnostic tasks such as compression testing. Connects to the starter system with push-button activation. Features a connectivity LED and 1.5m cable.

All steel construction with large soft grip handles. Quick change hardened and tempered jaws to suit insulated and non-insulated terminals. Ratchet action ensures consistent crimping.

Durable case and integral stand suitable for the toughest workshop conditions. Large, high-contrast LCD display with 34mm high digital read-out. Includes over-range indication, auto-zeroing, data-hold, auto-polarity, auto-power-off and low battery display functions. Supplied with capped test probes and K-type thermocouple.

Professional low cost tool saves all the vehicle settings to prevent loss and expensive reprogramming not just for radio codes but for immobilisers, traction control, engine management and satellite navigation. Bright, easy-to-read LEDs for at-a-glance confirmation of connection. Can be used with any existing booster packs with a vehicle accessory power socket or even vehicle-to-vehicle.

Save time and money and take the guesswork out of your fault-finding and diagnosis. Allows interrogation of the vehicle’s ECU to determine the performance of essential emission-based information, to read and clear Diagnostic Trouble Codes (DTCs) and to obtain vital performance data from the vehicle’s engine and transmission (Petrol 2000 onwards and Diesel 2003 onwards).