Durable composite housing with rubber grip around handle for comfort and control. Designed to verify the presence of AC and DC current and with non-contact voltage detection with flashlight and non-contact frequency measurement. Perfect for the automotive electrician. Features 18mm clamp, a backlit LCD display and an LED light at the front of the unit for use when working in dark areas....

Reduce time spent on, and damage to, vehicle electrical systems with these connector tools. Set consists of cable extraction, contact ejection and contact dismantling tools covering a wide range of connectors, including Kabelex, Micro-Timer II and III, Maxi-Power Timer and Pit-Pod.

Copper lug terminal crimping tool, crimp range is 10-120mm². BS Standard type terminal. Manufactured from SCM-40 hard tool steel. Accurate bore diameter and good crimping effect.

Robust and simple-to-use design offers a full in-vehicle diagnosis of the vehicle battery, starter motor and alternator in seconds. Professional tool supports all 12V batteries including standard Lead-Acid, VRLA, GEL plus AGM and EFB found on all Start/Stop vehicles. The in-vehicle test mode allows diagnosis of battery health, state of charge, internal resistance, cranking voltage and a...

The adjustable ratchet mechanism releases only after the correct crimp force has been applied to ensure a reliable connection. Ergonomic handle designed for comfort. Suitable for AWG cable sizes 10, 12, 14, 16, 18, 20. Supplied in a storage case with six sets of interchangeable jaws.

A range of functions allow automotive electricians and mechanics the ability to effectively diagnose short circuits and bad earths. The 4.6m lead connects to a 12V battery supply and reaches to all areas of the vehicle. Fly lead allows continuity and polarity testing with a high-contrast LCD display with 9mm high (3V to 42V) read-out. Activate components in situ or prior to installation....

One of the most advanced automotive probes on the market, with a huge range of functions for effective automotive diagnostics, making short circuits and bad earths easy to find. Features a scope function to visually test component signals, with the added benefit of maximum/minimum volts, frequency and duty cycle displayed. Allows components to be activated in situ or prior to installation. The...

Highly visible post and chain kit ideal for creating a temporary safety barrier when working on hybrid and electric vehicles. Consists of six red/white posts, six bases, 25m x 6mm red/white plastic chain and chain securing hooks. Post base can be filled with dry sand for extra stability.

Highly visible post and chain kit ideal for creating a temporary safety barrier when working on hybrid and electric vehicles. Consists of six black/yellow posts, six bases, 25m x 6mm black/yellow plastic chain and chain securing hooks. Only fill post base with dry sand when working around electricity.

High quality meter suitable for measurement of environmental and mechanical noise. Conforms to IEC61672-1 class 2 for sound meters. Features min./max. measurements, over and under range, A and C weighting, fast and slow response, data-hold, record, digital read-out and bar graph with backlight. Supplied in storage case.

Extra-large, high-contrast LCD display with 36mm high digital read-out, bar graph and back light. Durable case with probe storage and integral stand, suitable for the toughest workshop conditions. Features millisecond pulse-width function for accurate measurement of fuel injection systems. Includes auto-ranging, data-hold and auto-power-off. Bar-graph is essential for the correct testing of...

Traditional style drop tester for all 12V automotive batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage, faulty cell and short circuited cell.

High voltage rescue pole suitable for use up to 45kV AC in dry conditions, in accordance with EN 50508. Supplied with wall mounting brackets and instructions for use. Suitable for hybrid and electric vehicle applications.

Professional diagnosis of battery and alternator faults. Test battery condition with as little as 1V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of starter - no complicated connections or interpretation required. Analyse the vehicle’s charging system at rest and under load to determine condition of alternator. Connect and follow the prompts on the LCD screen for...

Specially designed for testing insulation on high voltage cables. Suitable for hybrid and electric vehicles. Supplied with test leads, batteries and storage case. Conforms to EN61010 CAT III (1000V).

The V-Scan multi-manufacturer diagnostic tool is a wireless Android based system, enabling near OE-level diagnostics. Extremely well priced mid-range tool, which allows you to use a mobile phone or tablet to diagnose cars, SUVs and vans. Connects to the vehicle using a standard 16-pin EOBD connector and includes extension cable for hard-to-access diagnostic sockets. Used in conjunction with a...

15-Function, auto-ranging automotive diagnostic multimeter with IR thermometer attachment. Combination digital/bar graph display gives accurate indication of component outputs. Large, easy-to-read high contrast display with bright, white back light. Workshop-tough, durable case with integral stand and auto-power shut-off. High-speed processing circuitry reads standard automotive parameters...

Crimps are all steel construction with large soft grip handles. Supplied with a set of 12 interchangeable jaws and convenient storage case. Allows selection of specific jaws for the large variety of crimping terminals used today.

Fast and accurate diagnosis of battery and alternator faults with facility to print the results. Large LCD display shows charging and starting system status and returns decision making information in seconds. Results need no interpretation and the tester will work on batteries with as little as 1.5V of residual charge.

Thermal imaging camera for the detection of high and low temperature. Heat-mapped colour palettes and temperature reading. Includes on-screen cursor to accurately locate minimum/maximum temperature variation. Suitable for many industries including automotive, building and electrical.

Pneumatic glove tester used to carry out a pressure test on electrician's high voltage gloves. Suitable for use with Model No. HVG1000VL Gloves.

Comprehensive set of test leads and components suitable for testing, isolating and evaluating automotive electronic circuits. Includes standard Ø4mm banana style plugs and sockets suitable for use with most diagnostic multimeters and test equipment. Supplied in sectioned storage case for quick location of components.

Combines an EOBD code reader and oil service tool in one unit. Extensive vehicle coverage for resetting the oil service/inspection lights. Suitable for setting inspection 1 or 2 service intervals and inspection mileage. Also includes manual reset using clear step-by-step on-screen instructions. Suitable for any EOBD compliant vehicle and reads EOBD diagnostic codes (Engine/Transmission) and...

Professional diagnosis of battery and alternator faults with the added facility to print the results. Test battery condition with as little as 1.5V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest and under load to determine condition of the alternator. Suitable...

Independent garages are now seeing a marked increase in hybrid and electric vehicles being presented to them for service and repair work. Because of change in the design of vehicle powertrains in recent years, vehicle technicians are having to adapt to new technologies and working practices to be able to safely work on these types of vehicle. This kit contains equipment that will be required to...

Package includes: Model No. - Description HRP45 - High Voltage Rescue Pole. HVG1000VL - 1kV Electrician's Safety Gloves HVM17K02 - 1 x 1m Electrician's Insulating Rubber Safety Mat. Ideal for technicians working on modern hybrid and electrical vehicles.

Professional diagnosis of battery and alternator faults with the added facility to print the results. Test battery condition with as little as 1V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest and under load to determine condition of the alternator. Connect and...

Specially designed for hybrid vehicles and conforms to EN61010 CAT III (1000V) and CAT IV (600V). Unlike other multimeters this unit has an insulation test function that allows testing of the insulation of the high voltage cables and motor generator units found on hybrid vehicles. Can be used as a stand-alone device or linked wirelessly with a USB interface to a PC or laptop enabling results to...

Professional diagnosis of battery and alternator faults with the added facility to print the results. Tests batteries up to 3000 CCA* SAE with as little as 1.5V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest and under load to determine condition of the...

Highly functional, the MOT Pro II® provides 40+ manufacturer coverage offering diagnostics on the most common modules such as EOBD, Transmission, ABS, Airbag, Battery testing/coding, DPF service and regeneration, Electronic Parking Brake (EPB), Oil Service Reset, some TPMS, some steering control sensors, climate, audio and more. The tool can be updated via web-based downloads. Supplied with...