View Left Column
352 products
Grid
Grid-2
List
List-2
Catelog
£31.55Price
The right size drain plug key always in your hand. Eight popular sizes covered in one tool. Suitable for drain plugs on engine, gearbox and rear axle.
£31.55Price
£31.57Price
Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with Model No. VS1601 Compressed Air Adaptor. Reversible jaw adaptor and automatic cam-action lock to preset spring tension. Suitable for use on a wide range of OHV, OHC and CVH engines.
Note: Not suitable for engines with deep-seated valves.
£31.57Price
Diesel engine glow plug compression test adaptor kit that cover a wide range of modern vehicles. For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
See Sealey website for complete vehicle applications.
£31.89Price
£31.89Price
Suitable for the syphoning of oil, petrol, diesel and non-aggressive fluids. Supplied with intake and discharge hose sets. Delivers approximately 9L/min.
£31.89Price
£31.89Price
Steel dial and rotating index line allows operator to accurately tighten cylinder head bolts and other fixings to manufacturer's exact specifications. Long reach flexi arm with clip end provides extra stability and precision.
£31.89Price
£31.89Price
Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes three brass brushes, two end brushes 15/19mm, one extension bar, one steel rod and six blanking plugs.
£31.89Price
£33.01Price
Suitable for most small and medium sized OHV engines. Fully adjustable jaw with 75-165mm capacity and 150mm throat depth. Parallel lift action with automatic lock.
£33.01Price
Forged, Chrome Vanadium steel, 3/8"Sq drive WallDrive® sockets with magnetic plug retention, external hex and polished chrome finish. Set includes thin walled 16mm socket, for where clearance is tight.
£33.01Price
£33.47Price
Designed to provide a safe secure method for supporting the engine if the engine mounting has to be removed for cylinder head work. Prevents the engine from slipping or dropping unexpectedly. When installed the vehicle can be moved to another location without the need to use a lifting device. Suitable for N12, N14, N16 and N18 Engines fitted in BMW Mini models.
£33.47Price
£33.48Price
Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Supplied with three different lengths of thread insert.
£33.48Price
£33.48Price
Large easy-to-read gauge with Metric and Imperial readings. Side release valve and 12” flexible hose for easy reach. Pressure range 0-300psi/0-2000kpa. Screw-in 14 and 18mm adaptors and 150mm rigid stem cone adaptor fits most spark plug holes. Supplied in storage case.
£33.48Price
£35.19£70.81Regular price-£35.62 offPrice
Suitable for repairs on Bosch, Denso and Siemens injectors. 6.6, 7.6mm Hex security bits 20mm Hex/1/2"Sq Drive. 16mm 8-sided socket for Bosch common rail Injectors. Denso common rail injector valve seat removal tool. Injector ball valve lapping tools and guide. Manufactured from Chrome Vanadium steel and S45C. Supplied in storage case.
£35.19£70.81Regular price-£35.62 offPrice
00
day
00
hour
00
min
00
sec
£35.88Price
Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Supplied with three different lengths of thread insert.
£35.88Price
£35.88Price
Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring harness. Includes two chasers for cleaning and repairing damaged threads. Supplied in storage case.
£35.88Price
£35.88Price
Replacement plastic sump plug used on Citroen/Peugeot and Ford vehicles. Ford OEM Part Number: 1871598. Citroen/Peugeot OEM Part Number: 9801444780.
£35.88Price
£35.88Price
Replacement plastic sump plug used on BMW vehicles. BMW OEM part number: 11137605018.
£35.88Price
£35.88Price
Replacement plastic sump plug used on VAG vehicles. Also suitable for the camshaft cover on VAG 1.6D and 2.0TDi diesel engines. VAG OEM part number: 06L 103 801.
£35.88Price
£37.30Price
Designed to reduce the amount of time taken to replace the engine oil filter on Vauxhall/Opel vehicles fitted with the B20 diesel engine. Once the drain funnel is located, oil draining from the oil filter can be channelled into a suitable receptacle. Time-saving tool as it eliminates oil spillage onto vehicle chassis and components during filter change.
£37.30Price
£37.31Price
Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock.
£37.31Price
£38.26Price
Designed to remove the copper injector seal when it has stuck into the head. Adjusts to allow seals with Ø6.7-8.7mm internal diameter to be removed. Simply drop the tool into the hole left by the injector, tighten the handle and lift out the seal.
£38.26Price
£38.58Price
Detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, data-hold and auto-power-off. Temperature is displayed on a large 23mm LCD HD colour screen with back-lit display for use in low light areas. Temperature can be shown in either °C or °F. Temperature Range: -50°C to +400°C (-58°F to +752°F). Powered by 2 x AAA batteries...
£38.58Price
£39.19£66.66Regular price-£27.48 offPrice
For quick removal/installation of valve collets, firmly push or tap tool with a hammer, magnet in tool captures collets. Can be used with cylinder head in situ or on workbench. Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. For in situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion...
£39.19£66.66Regular price-£27.48 offPrice
00
day
00
hour
00
min
00
sec
Diesel engine glow plug compression test adaptor kit that cover a wide range of modern vehicles. For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
See Sealey website for complete vehicle applications.
£39.87Price
Diesel engine glow plug compression test adaptor kit that cover a wide range of modern vehicles. For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
See Sealey website for complete vehicle applications.
£39.87Price
Replacement plastic sump plug used on Ford vehicles. Ford OEM part number: 1830727.
£39.87Price
£39.87Price
Comprehensive set of Chrome Vanadium steel keys with sliding T-bar. Suitable for sump plugs on engine, gearbox and back axle.
£39.87Price
Set of three different size spanners for removing and refitting fuel tank sender mounting rings. Includes 2-leg and 3-leg configurations ranging from Ø85mm to Ø170mm.
£41.46Price
£41.46Price
Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.
Note: Not suitable for vehicles with deep-seated valves.
£41.46Price
£41.46Price
Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.
£41.46Price
For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.
£41.62Price