View Left Column
352 products
Grid
Grid-2
List
List-2
Catelog
£118.46Price
Comprehensive set for removing Citroen/Peugeot/Fiat 2.0/2.2HDi 16v fuel injectors. Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. Supplied in storage case.
£118.46Price
£119.65Price
Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images. Tablet design makes the image incredibly clear but also very portable. Features controls for light intensity, digital zoom and image rotation. Waterproof probe pod with IP67 rating. Powered by 2600mAh rechargeable with 5 hour working time (USB Charging cable supplied). SD card can be...
£119.65Price
£121.09Price
Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance. Clear pipes allow visual detection of any air within the fuel system or being inadvertently drawn into the fuel line. Model has a valve to work in conjunction with Ford IDS diagnostic equipment, allowing the vacuum to be monitored.
£121.09Price
£122.84Price
Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system. Kit supplied with four pairs of stepped adaptors to fit most sizes of hose. Features a pressure gauge, shut-off valve and pressure release valve. Can also be used on cooling system hoses. Supplied in storage case.
£122.84Price
£122.84Price
8L Capacity device constructed from composite materials. Suitable for the extraction of all types of engine, transmission and lubricating oils from vehicles and machinery. Also suitable for the extraction of petrol/diesel and low viscosity fluids such as water. Supplied with 1.5m main hose, with interchangeable Ø6.7 x 700mm dipstick oil probe and Ø7 x 400mm universal fluid probe. Supplied with...
£122.84Price
£122.84Price
Designed to charge the turbo/intercooler system with a low pressure of regulated workshop air to show the presence of leaks within the system. Kit supplied with three pairs of stepped adaptors to fit most sizes of hose found on heavy commercial vehicles. Features a pressure gauge, shut-off valve and pressure release valve. Supplied in storage case.
£122.84Price
Updated kit designed to measure return fuel flow on diesel vehicles up to 6-cylinders, fitted with common rail injection system. Identifies worn, blocked or inoperative injectors quickly and easily. Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation. Master kit includes range of adaptors to suit Bosch, Delphi, New Delphi and Denso...
£127.65Price
Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.
£150.38Price
Comprehensive automotive fuel line and air conditioning hose disconnection kit. Suitable for a wide variety of vehicles. Designed for radiators, transmissions, oil coolers and power steering lines. Compatible with low profile fuel lines on a range of Ford and Vauxhall/Opel models. Supplied in storage case.
£131.62Price
£131.64Price
Extensive set designed for a wide range of vehicles. Cap type filter wrenches, made from 7 and 16 gauge steel, will withstand up to 115Nm(85lb.ft) of torque. Designed to grip like sockets, thereby minimising the possibility of crushed filters. Includes adjustable oil filter wrench. Adaptor allows use with 3/8" or 1/2"Sq drive wrenches. Supplied in storage case.
£131.64Price
£133.59£201.85Regular price-£68.26 offPrice
One of the most comprehensive balancer sets available on the market. Features a bank of four mini-gauges with lockable valves enabling user to hold vacuum values in use. Supplied with set of carburettor adaptors for easy-access amongst the tubes and wires around the carburettor. Includes four 900mm delivery tubes. Supplied in storage case.
£133.59£201.85Regular price-£68.26 offPrice
00
day
00
hour
00
min
00
sec
£134.02Price
Ø3.9mm Borescope probe with 320 x 240 pixels camera resolution. Waterproof probe pod with IP67 rating. Features lighting LEDs for a clear image in dark areas. Small enough to fit into a diesel combustion chamber through the glow plug hole. Use with Model No. VS8232, optional for Model No's VS8230 and VS8231.
£134.02Price
£134.26Price
Comprehensive and time-saving kit of spark plug thread repair tools. Especially suitable for the repair of deep-seated plug configurations. Incorporates taper and plug taps together with integrated ream. Stepped tap ensures correct alignment of cutter in existing spark plug hole. Extension tools allow easy-access to the bottom of the plug recess. Includes set of plug inserts.
£134.26Price
£145.19Price
Composite cased Xenon timing light with inductive impulse pick-up and 4-digit LED read-out. Includes mode for 2-stroke and distributorless ‘lost spark’, 4-stroke engines. Supplied with 1.5m coiled 12V power lead, inductive coupler and operating instructions.
£145.19Price
£149.18Price
Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds. May be used with feeler gauges for high precision work. Made from Carbon Steel. Supplied in storage case.
£149.18Price
£157.96Price
£167.53Price
Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems. Fitted with quick couplings and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-140psi and 0-10bar. Pressure release valve fitted with long drain hose allows safe recovery of fuel....
£167.53Price
£171.12Price
Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimizes the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow 2-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5") press rams. Optional...
£171.12Price
£186.70Price
Designed to remove damaged/broken glow plugs from cylinder heads. Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread. Set includes all required adaptors for drilling, centring and pulling for the safe removal of glow plug. Supplied in storage case.
£186.70Price
£186.92Price
Fast and effective remedy for damage to cylinder head glow plug threads. Set includes tools for the precise insertion of threaded inserts into the head and features a unique tap guide system to ensure their correct alignment. Includes four sizes of threaded adaptors suitable for common sizes of glow plug. Supplied in storage case.
£186.92Price
Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.
£238.55Price
£191.47Price
Used to detect the pulse from the fuel pipes of diesel fuel injectors. Works on most direct injection diesel engines fitted with 6mm(1/4") to 10mm(3/8") external fuel pipes. Suitable for use with most timing lights, engine analysers and multimeters that have an inductive pick-up.
£191.47Price
£205.36Price
For removing the heater element that can break off during glow plug removal. Saves time not having to remove the cylinder head. Works by drilling/tapping a thread into the broken element so the supplied glow plug adaptors can be used to extract. Supplied with seven drilling/tapping guides and five glow plug extraction adaptors with either a M8 or M10 thread.
£205.36Price
£215.43Price
Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90° coupling adaptor for limited access applications. Supplied in storage case.
£215.43Price
£215.43Price
Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. Ball joint allows hammer to be used in confined areas. Supplied in storage case.
£215.43Price
£228.18Price
A comprehensive fuel priming set fitted with the latest male and female quick connectors found on Fiat, Ford, Land Rover, Mercedes, PSA, Renault, Rover and Vauxhall/Opel vehicles. Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance. Clear pipes allow visual detection of any air within the fuel system or being...
£228.18Price
£239.35Price
Suitable for Ford EcoBlue 2.0L engines. Easily extracts Ford EcoBlue diesel injectors in one piece so they can be refitted. The set includes a force screw, shoulder nut (with bearing), injector clamp, clamp bolt, flare nut, support bridge and bridge legs with nuts (x2). Equivalent to OEM 303-1706.
£239.35Price
£258.50Price
High performance pistol grip borescope with 85mm colour TFT screen, waterproof probe pod with IP67 rating. Features video record/playback, still images and stream live video via the AV out connection. Videos and images are stored on a 4GB micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection. Also features digital...
£258.50Price
£287.23Price
Portable articulated borescope supplied with 70mm TFT colour display. Mini waterproof (IP67) camera with integral light (Ø6mm) mounted on 800mm flexible 2-way articulated probe. Using an attached dial, the camera head angle can be changed by up to 350˚ without having to remove camera from inspection area. Using 8GB micro SD card (supplied), up to 9hrs of video and 20,000 still images can be...
£287.23Price
£298.40Price
Suitable for the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus a selection of adaptors for attaching the slide hammer securely to the body of the injector. Ball joint and choice of two sizes of slide hammer allow access in confined areas if required. Supplied in storage case.
£298.40Price