Pick-up and transport stacks of car tyres with ease. Strong tubular steel construction with welded joints. Pneumatic tyres allow easy transportation over rough ground.

Suitable for small right-handed MacPherson strut coil springs. Vinyl-dipped yoke protectors protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. Safety yokes are carefully shaped to stop the spring from bowing while under compression. Use in conjunction with SEALEY coil spring compressor RE3000.

Heavy-duty ball joint splitter with interchangeable jaws. Enables operator to select correct jaw size without taking entire splitter to the vehicle. Use manually or with 12 Tonne hydraulic ram (supplied).

The easy and instant way to seat tubeless tyre beads. Dumps air into tyre void forcing bead to seat against rim for inflation. Air release is controlled by a hand lever operating a ball valve. Fully certified tank with gauge and safety valve prevents over pressurising. Suitable for use on cars, commercials, agricultural and ATV tyres.

Compact design for use on wishbone suspension using access points in the rear suspension arm. Includes two pairs of carefully shaped yokes that prevent the coil spring from bowing and a drive extension for use in restricted areas. Saves time over traditional methods of demounting springs. Supplied in storage case.

Suitable for right-handed MacPherson strut coil springs. Vinyl-dipped yoke protectors protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. Safety yokes are carefully shaped to stop the spring from bowing while under compression. Use in conjunction with SEALEY coil spring compressor RE3000.

Suitable for MacPherson strut coil springs. Features a yoke extension bracket that also allows use on conical springs. Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. Safety yokes carefully shaped to stop...

Comprehensive kit for fast and effective in situ removal/installation of wheel bearings, suspension bushes and seals. Reduces the possibility of damaging the bearing/suspension housings. Supplied with 22 adaptors from Ø44 to 90mm and five force screws in storage case. Adaptors can also be used in a standard workshop press when in situ access isn't possible.

Designed to be used with a standard workshop press. Adjustable diameter and six interchangeable support legs provide quick alignment of hub or suspension frame for secure and level pressing. Ideal when removing and installing wheel bearings and bushes.

Suitable for the removal/installation of the rear trailing arm mounting bushes on Ford and Volvo vehicles. Can be used in situ without removing the arm from the vehicle. Supplied in storage case.

Suitable for left-handed MacPherson strut coil springs. Vinyl-dipped yoke protectors protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. Safety yokes are carefully shaped to stop the spring from bowing while under compression. Use in conjunction with SEALEY coil spring compressor RE3000.

Floor standing unit for spreading vehicle tyres before carrying out repairs. Features rollers to rotate the tyre to the correct position and fully adjustable platform. Suitable for most cars and light commercial vehicles.

The easy and instant way to seat tubeless tyre beads. Dumps air into tyre void forcing bead to seat against rim for inflation. Air release is controlled by a diaphragm valve and push-button trigger. Features slotted key to prevent accidental operation of the trigger. Fully certified tank with gauge and safety valve prevents over pressurising. Suitable for use on cars, commercials, agricultural...

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures the bearing into the housing. Suitable to be used in situ when replacing the front wheel bearings. Supplied in storage case.

Hydraulic hand pump unit powers 1000kg capacity ram and yoke assembly. Up to 50% faster than using other ratchet driven spring compressors. Equipped with two pairs of spring yokes with rubberised covers to prevent slippage and damage to springs. Suitable for springs from Ø80mm ID to Ø165mm OD.

Hydraulic action, suitable for breaking beads on commercial and agricultural tyres. Use in conjunction with hydraulic pump and hose (not included).

Chrome Molybdenum, drop-forged, 6-tooth impact socket with detachable inner location sleeve. Designed for locknut fitted to MAN TGA axles.

Use in conjunction with Caster Kingpin Gauge Sets for accurate castor and kingpin alignment. Also measures toe-in/out and full lock angles. Locking pins prevent rotation of table whilst driving vehicle on and ensure accurate angular measurements. Measures up to 55º rotation in either direction. Maximum loading 4000kg per pair.

Suitable for MacPherson strut coil springs. Supplied with five pairs of different sized interchangeable yokes, for right and left-handed coil springs. Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee. Safety yokes carefully shaped to stop the spring bowing while under compression.

Foot operated hydraulic unit. Quicker and easier than using ratchet driven spring compressor. Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from Ø80mm to Ø175mm.

Robust, high reliability and modern design which is lightweight and space-saving. Touchscreen technology with human touch recognition software. Electronic pressure set with additional 4-button memory function. Three modes, inflate, deflate and over pressure setting (OPS) – which allows operator to set the machine to automatically seat the bead on new tyres whilst getting on with alternative...

Used to check and adjust the alignment of the lasers on Model No. GA70 Four-Wheel Laser Aligner. This unit will allow workshops to check and adjust in-house. Laser heads secure to the rig and rest on the bobbins that contact the vehicle’s wheel rim. Supplied with comprehensive instructions.

Foot operated hydraulic unit, with gauge showing force applied to the spring under compression. Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee.

High quality, European made, 1600kg coil spring compressor kit. Supplied with two pairs of drop-forged safety yokes, with polyurethane inserts for improved grip. Yokes are carefully shaped to prevent coil spring from bowing. Features Safety restraint wire as a precaution, in the unlikely event of a spring slipping.

The top mount bracket allows compression of tightly coiled springs. The bracket multi-hole configuration can be rotated and fixed in position with ease. Use in conjunction with SEALEY coil spring compressor RE3000. Applications - Nissan Qashqai. Renault Talisman, Megane, Master 3° Series, Kojar, Koleos, Peugeot 208, 3008, 5008. Tesla S. BMW X1, X2, X3, X4, X5, Series 1, Series 2. Ford Transit....

Optical system uses low radiation laser beam to indicate toe-in or toe-out. Single leg configuration and reversible contact probes allow on-ramp use. Works on practically all cars and light commercials with rim diameters from 200mm(8") to 600mm(23.5"). Powered by 2 x AA batteries (not included) and includes operating instructions.

A hydraulic bead breaker kit is essential to change commercial and agricultural tyres. Hydraulic action which is suitable for breaking beads. 10 Tonne air pump, for use with the hydraulic bead breaker. Maximum air input 90-120psi. Hose assembly to connect the bead breaker and air pump. Length 1540mm with ¼” BSPT inlet thread. • Package includes: • TC966 - Hydraulic Bead Breaker. • RE83/840 -...

Heavy steel construction. Pneumatic bead breaker. Suitable for use on most automotive/light commercial open centred wheels. Features additional air line coupling for tyre inflator. Supplied with standard tyre bar and PCL couplings. To prevent damage to the rims of the alloy wheel, use optional Tyre bar, Model No. TC963 Tyre Bar.

Designed for the installation and removal of slotted bushes on commercial spring suspension. Includes a 12 Tonne hydraulic cylinder (supplied without hydraulic pump). Use in conjunction with Hydraulic Pump Model No's RE83/840/CWH (Air/Hydraulic) or RE97.10-01 (Hydraulic). Installation protects the bush using the parallel working tension elements. Suitable for use on the vehicle. Safe and...