Chrome Molybdenum socket, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. 6-Point sockets are externally and internally sleeved to prevent damage to alloy wheels and nuts. Colour-coding for ease of size selection.

Die-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.

Ideal for repairing punctures on tubed and tubeless tyres fitted to agricultural and off-road vehicles. Can also be used as a temporary/emergency fix on cars and commercial vehicles. Repair strips allow tubeless tyres to be repaired without removing the tyre from the wheel. Also includes parts and tools for general tyre servicing. Not to be used as a permanent repair for road vehicles.

Designed to prevent the damper piston rod from turning while removing and replacing the rear suspension strut. Suitable for VAG, Ford, GM, Honda, Toyota. 2-Point, 5 and 6mm, 182mm length.

3-in-1 Pocket-size tyre gauge with removable keyring. Simple one-button operation with easy-to-read large backlit LCD display. Tread depth function gives high accuracy readings in mm or inches as well as a simple-to-read traffic light system for wear indication. Precise tyre pressure readings can be displayed in bar, psi, kPa and kg/cm². Equipped with a bright LED and auto-power-off feature.

Hardened carbon steel tyre lever, with hook and taper ends.

Tough composite sliding gauge. 10mm Digits in LCD display for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement.

Multipurpose tool. Primarily designed for the installation and removal of wheel balance weights. Also includes tools for prising off wheel trims and preparing wheel balance weights.

Time-saving tool allows you to remove and install leaking tyre valves without having to remove the tyre. Works on steel wheels and especially good for valves on motorcycle or agricultural wheels. Not suitable for high pressure valves.

Dial type pressure gauge that can read up to 15bar(220psi). Metal body, long reach twin connector and high range scale. Compatible with both cars and commercial vehicles.

Die-cast body and dial gauge with rubber protector. Fitted with single clip-on connector. Supplied with quick coupling.

Robust gauge with protective rubber bumper. Supplied with clip-on connector.

Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. Deep 6-point WallDrive® sockets allows a transfer of up to 30% more torque to the fixing. Supplied in storage case.

Tyre pressure gauge with integral tread depth gauge and worklight. Push-button operation with backlit LED display for tyre pressure. Read-out available in bar, psi, kg/cm² or kPa. Integral tread depth gauge reads up to 20mm. Auto-power -off.

Chrome Molybdenum steel socket with 1/2"Sq drive. Used with air impact wrench running in reverse, deep reverse helix grips locking wheel nut. Ideal for busy fast fit operation. Removal action will distort wheel nut and replacement is recommended. For distribution to bona fide vehicle dealers and repair centres only.

Longer than most other wheel braces on the market, allowing extra force to be applied. Manufactured from carbon steel with chrome finish. Features three popular sizes of wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.

Compact design incorporating integral storage for air output hose. Features a worklight and pressure gauge which reads up to 5.5bar (80psi). Powered by a 12V motor suitable for inflating tyres on motorcycles and cars. Supplied with vehicle accessory socket plug and battery clips.

Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool.

Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool.

Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool.

Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool.

Chrome Molybdenum steel torque stick designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool.

Pressure gauge with Ø50mm dial, reading up to 60psi. Metal Body, fitted with 45° angle chuck.

Five times stronger than the conventional design and tested to 500Nm. Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. 6pt Socket is sleeved and has an insert to prevent damage to alloy wheels and nuts.

Five times stronger than the conventional design and tested to 500Nm. Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. Six-point socket is sleeved and has an insert to prevent damage to alloy wheels and nuts.

Five times stronger than the conventional design and tested to 500Nm. Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. Six-point socket is sleeved and has an insert to prevent damage to alloy wheels and nuts.

Suitable for many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA399, SA37/93, SA37/95, SA400, SA9312, SA9313, SA37/93B, SA37/96B and SA37/99.

Compatible with many brands of tyre inflator fitted with a 1/4” BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA399, SA37/93, SA37/95, SA400, SA9312, SA9313, SA37/93B, SA37/96B and SA37/99.

Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material. Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length. Fitted with large and comfortable handle.

Universal hub holding wrench. Suitable for four and five stud wheels.