Heavy-duty 4-point specialised impact socket for removing the rear hub nut on RWD Ford Transit vehicles. Alignment shaft allows accurate location onto castellated nut.

Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with 4-Wheel Laser Aligners such as Model No. GA70. Self-retaining and centring using a spring loaded mechanism. Features a level bubble to show horizontal position. Suitable for steering wheels with an internal diameter of between Ø270mm and Ø340mm.

Heavy-duty, high quality, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool. Blackened finish for added corrosion resistance. Tool suitable for hub nut applications where high torque is required. Supplied in a storage case.

Sockets manufactured from Chrome Vanadium steel. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with a 3/8"Sq drive ratchet or T-bar (not included).

Chrome Molybdenum, drop-forged, 6-point, high-impact socket designed for the removal of Iveco Eurocargo axle nut.

Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W...

Chrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. Each 6-point socket is sleeved and has an insert to prevent damage to alloy wheels and nuts. Colour-coded socket assists ease of size selection. Comprises deep or long reach 17, 19 and 21mm sockets. Supplied in storage case.

Removes surface dirt and corrosion on hubs that use wheel bolts. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Use with 1/2"Sq drive adaptor.

Set of nine aluminium bearing and seal drivers. Suitable for straight installation of bearing race without damage to the bearing or axle housing. Fits most popular bearing race sizes. Supplied in storage case.

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale, in psi and bar. Fitted with 0.5m rubber hose with steel protection sleeve and clip-on air connector.

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale, read in psi and bar. Fitted with 0.5m rubber hose with steel protection sleeve and twin push-on air connector.

Mini air compressor with delivery of 25L/min. Air output hose features quick release coupling. Suitable for inflating tyres on cars. Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

Designed for twin tyres but suitable for all cars and commercial vehicles. Precision engineered and fitted with large filter to protect operating mechanism for hard usage over long periods. Fully polished mirror finish.

Suitable for removal and installation of spring and shock strut from steering knuckle. Prevents expensive damage to aluminium or cast iron steering hubs. Excellent also for spreading the clamp on lower ball joints. Wide range of vehicle applications.

Steel body CVJ Boot band pliers with 3/8"Sq drive, for the assembly of new stainless steel bands on drive shafts where a torque setting is required.

Set of 20 locking keys for the removal of security locking wheel nuts on Vauxhall-C vehicles. For distribution to bona fide vehicle dealers and repair centres only.

Suitable for the removal/installation of the front lower suspension pivot arm bush. Can be used in situ without removing the aluminium hub carrier from the vehicle.

Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles. Large adjuster knob for convenient zeroing of bubble during castor angle measurement. Graduated from -6° to +6°. Supplied in storage case.

Chrome Molybdenum steel torque sticks designed for use with air and electric impact wrenches. Prevents over-torque of wheel nuts. Anodised aluminium colour-coding for easy selection. Features a twist distortion marking for checking serviceability of tool. Supplied in storage case.

Suitable for the restoration of external threads. 215mm Double end files each supplied with reversible vinyl grip.

Suitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends.

Designed for twin tyres but suitable for all cars and commercial vehicles. Precision engineered and fitted with large filter to protect operating mechanism for hard usage over long periods.

Designed for loosening and adjusting stubborn track-rods when making repairs or adjusting the wheel alignment. Ideal when the tie-rod has no hex or flats and a spanner cannot be used. Features a spring loaded jaw which grips tighter as more force is applied.

Designed for use on McGard locking wheel nuts. For use with Model No. SX299. For distribution to bona fide vehicle dealers and repair centres only.

Suitable for the fast and easy removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Fits racks with hex drive, two flats and round ends.

Designed for axle nut fitted to SAF Euro trucks. Suitable for use with 46mm socket, together with impact or torque wrench.

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale, read in psi and bar. Has 2.7m hose with clip-on air connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres.

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 0.5m Flexible hose fitted with 240mm, twin push-on air connector.

Manufactured from nylon polymer and robust glass. Ergonomic lightweight design with textured thumb lever. Increased window size ensures clearer vision and better accuracy. Linear pressure scale, dual calibrated in psi and bar. 205mm Flexible hose fitted with 250mm twin hold-on air connector.