Ideal for repairing punctures on tubed and tubeless tyres fitted to agricultural and off-road vehicles. Can also be used as a temporary/emergency fix on cars and commercial vehicles. Repair strips allow tubeless tyres to be repaired without removing the tyre from the wheel. Also includes parts and tools for general tyre servicing. Not to be used as a permanent repair for road vehicles.

Designed to prevent the damper piston rod from turning while removing and replacing the rear suspension strut. Suitable for VAG, Ford, GM, Honda, Toyota. 2-Point, 5 and 6mm, 182mm length.

Black nitrile gloves ideal for repair technicians, mechanics, health and safety work, among other uses. More durable than standard nitrile gloves thanks to 10mil thickness. Provides excellent protection whilst being light and flexible. Chemical resistant and certified to EN ISO 374-1:2016+A1:2018 , EN 374-5:2016 and EN420:2003+A1:2009. Also certified to BS EN ISO 374-5 (bacteria, fungi and...

Black nitrile gloves ideal for repair technicians, mechanics, health and safety work, among other uses. More durable than standard nitrile gloves thanks to 10mil thickness. Provides excellent protection whilst being light and flexible. Chemical resistant and certified to EN ISO 374-1:2016+A1:2018 , EN 374-5:2016 and EN420:2003+A1:2009. Also certified to BS EN ISO 374-5 (bacteria, fungi and...

Diamond Grip gloves ideal for repair technicians, mechanics, health and safety work, among other uses. Greater elasticity and durability thanks to extra-thick 10mil construction. Chemical resistant and Certified to EN ISO 374-1:2016+A1:2018 , EN 374-5:2016 & EN420:2003+A1:2009. Raised textured surface vastly improves grip over regular disposable gloves in both wet and dry conditions....

Diamond Grip gloves ideal for repair technicians, mechanics, health and safety work, among other uses. Greater elasticity and durability thanks to extra-thick 10mil construction. Chemical resistant and certified to EN ISO 374-1:2016+A1:2018, EN 374-5:2016 and EN420:2003+A1:2009. Raised textured surface vastly improves grip over regular disposable gloves in both wet and dry conditions....

Durable HPPE knitting provides cut resistance to level C. Anti-slip coating on the palm of the glove to give greater control to use in wet or oily environments. Additional reinforcement at thumb crotch for enhanced protection. Impact resistant TPR material on the back of the glove to help protect knuckles, fingers and thumbs during use. Hook-and-loop wrist strap. Conforms to BS EN ISO...

Durable HPPE knitting provides cut resistance to level C. Anti-slip coating on the palm of the glove to give greater control to use in wet or oily environments. Additional reinforcement at thumb crotch for enhanced protection. Impact resistant TPR material to back of the glove to help protect knuckles, fingers and thumbs during use. Hook-and-loop wrist strap. Conforms to BS EN ISO 21420:2020...

Durable HPPE knitting provides cut resistance to level C. Anti-slip coating on the palm of the glove to give greater control to use in wet or oily environments. Additional reinforcement at thumb crotch for enhanced protection. Impact resistant TPR material on the back of the glove to help protect knuckles, fingers and thumbs during use. Hook-and-loop wrist strap. Conforms to BS EN ISO...

Durable HPPE knitting provides cut resistance to level C. Anti-slip coating on the palm of the glove to give greater control to use in wet or oily environments. Additional reinforcement at thumb crotch for enhanced protection. Impact resistant TPR material to back of the glove to help protect knuckles, fingers and thumbs during use. Hook-and-loop wrist strap. Conforms to BS EN ISO 21420:2020...

Manufactured to CAT 2 BS EN 388 and BS EN 407 from 100% DuPont Kevlar®. Designed for use in engine bays to prevent cuts to forearms and burns from exhausts and other hot components. Thumb slot design ensures sleeve will stay in position.

Set of air chisels suitable for Sealey and other leading brands of air hammers. Includes five chisels with different head shapes. Ideal for hard surface break up and chiselling.

5-Piece panel wedge removal set. For removal of mouldings, door coverings, plastic clips and plugs. Set includes a wedge, clip remover, long wedge with taper, thin wedge and wedge with felt padding.

Multipurpose ball joint dust covers easily replace split or damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pack contains three ball joint dust covers supplied with retaining O-rings and fitting tool. Covers a wide range of commercial vehicle applications.

Conical nozzles suitable for our Powermig® 2750, 3500, 450 and Mightymig® 250 range of welders with MB25/36 torches.

Heavy-duty ergonomic design with easy-to-read scale and large base for added stability. Manufactured from hard-wearing polyethylene, resistant to oil, fuel and most acids. Fixed straight spout. Scale for indication purposes only.

Manufactured from tin-plate with polyethylene spout. Removable brass filter. High rim acts as splash guard. Handle for safe and easy pouring. Suitable for industrial and workshop use.

Polyethylene funnel set suitable for many fluids including detergents, pesticides, diesel and petrol. Set comprises Ø75mm, Ø150mm and Ø250mm funnels with hanging tabs. Not suitable for acetone, gun wash or thinners.

Syphon type drainer with jiggle action. Simply move hose up and down in vertical position to start flow. Supplied with a Ø3/4" ID 2m hose. Also suitable for petrol.

Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.

HSS roll forged drill bit manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. High-density case for safe storage.

Fully ground HSS drill bit manufactured to DIN 338. 135° Split point is self-centring which helps to reduce thrust, friction and heat and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills, particularly on high carbon steels and copper. High-density case for safe storage.

Ø6mm Mill cutter made from high quality Carbide steel. For use when performing tyre repair, to create a clean hole before plugging punctures. Pointed tree cut. Shank size: Ø6mm. Overall length: 90mm. Supplied in a plastic storage case.

Multipurpose accessory kit for buffing and polishing a variety of materials and objects. Able to be used on materials such as metal, aluminium, stainless steel, chrome, glass and more. Manufactured from soft grade cotton. Designed to fit any standard sized drill chuck. 6mm (1/4") shank. Contents: 3 x cloth wheels: 50/75/100mm, 1/4 shaft, 1 x 50mm conical, 1 x 50mm pattern, 1 x 38mm cylindrical,...

Die-cast cutter body with foldaway pipe deburring tool. Smooth action thread with one-piece cutter-slide and hardened alloy steel cutting wheel give excellent results on all types of soft metal tubing.

High-speed HSS 4341 double straight flute step drill. Double straight flutes for efficient swarf clearance. Allows clog-free precision drilling. Supplied in plastic storage case.

Die-cast body with aluminium tube. Supplied with plastic plunger and application nozzle. Suitable for 400ml sausage packs and 310ml cartridges.

Manufactured from heavy-duty polyethylene with a versatile, flexible construction. Ideal for a wide range of domestic and industrial applications.

Suitable for the lubrication of cutter bars and chains of pump and pressure-fed chainsaws requiring an ISO 220 or SAE 50 lubricant. Tacky formula prevents oil fling and splatter. Extends the lifespan of your chainsaw by protecting against sap and resin. Prevents corrosion of the chain and bar.

Professional seal driver shell works with a range of Sealey Fork Seal Driver Sleeves. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Ergonomically designed driver body requires less power and aids accurate operation. Compatible with Model No's MS0531, MS0551, MS0561, MS0581, MS0591 Fork Seal Driver Sleeves.