One step termination and environmental protection. Butt connectors require no heat for installation, easy to install along with application flexibility. Connector prevents water entry under permanent pressure or weight.

Aluminium multi-grip rivets. Manufactured to DIN 7337.

Designed for fitting to many electric and air sanders when being used for polishing. Ø115mm with 5/16"UNF thread enables use with Ø150mm hook-and-loop backed buffing and polishing foam heads.

Aluminium oxide, depressed centre disc for electric and air tools. Suitable for metal grinding applications. Pack of 5.

Key operated padlock with corrosion resistant brass body and hardened steel shackle. Featuring precision 5-pin tumbler locking mechanism. Supplied with three keys.

Automotive MICRO blade fuse pack.

Speedfit® pneumatic couplings, thread adaptor Metric pipe to Imperial thread couplings supplied in sizes 6, 8,10mm. Material specifications; Bodies are produced in an acetal copolymer engineering plastic, especially suitable for pneumatics and corrosion free applications; O-rings are nitrile rubber; collets are produced in acetal copolymer with stainless steel teeth.

Angled grease nipple with a 45 degree angle. Passive zinc plated for corrosion resistance. Thread size M8 x 1mm. Supplied in a resealable bag. Pack qty - 25pcs.

Angled grease nipple with Metric thread.

Blade terminal.

Brake pipe fitting Imperial and Metric fittings.

Superior quality auger wood drill bit has a hexagonal shank for higher torque ranges demanded by this drill type. Fully hardened with a screw point to aid location and smooth drilling. Supplied in a plastic wallet.

Lightweight broom ideal for domestic use. Fitted with plastic handle and detachable soft PVC bristle head, ideal for cleaning dust and dirt.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and Ø58mm drum closure diameter fitting.

Device designed to stop the over-compression of motorcycle forks whilst in transit. For use on off-road style motorcycles with a minimum front wheel to mudguard clearance of 255mm.

1/2"Sq Drive. H22 53mm long socket. Can be used for removing the front and rear wheels on modern motorbikes with internal Hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

Radically reduces the time adhesives and super glues take to cure. Ideal for large gap fills up to 0.4mm and porous material that are ordinarily troublesome to glue. Can be used on MDF, wood, glass, metal and most plastics.

Zinc plated hexagon headed setscrews. Manufactured to DIN 933 with high tensile strength grade 8.8 steel.

Zinc plated DIN 7504K self-drilling hex head screw. Pack of 100. Supplied in resealable bag.

Zinc plated P-clips manufactured to DIN 3016. Holds and secures cables, piping and tubing. Rubber lined to prevent damage. Standard 8mm bolt hole for fixing.

Designed for use where plug clearance is tight. Standard depth, thin wall, 3/8"Sq drive WallDrive® socket.

Designed for use where plug clearance is tight. Standard depth, thin wall, 3/8"Sq drive WallDrive® socket.

Locknut for backing pads.

Locknut for backing pads.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. • Fits models: 2001LE - Series, 3015CXD, 3015CXHV and 3001CXP.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size Ø99mm. Fits Saddle Ø96.5-99mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 6.5mm. Size Ø94mm. Fits saddle Ø93-96mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 8.3mm. Size Ø99.5mm. Fits saddle Ø99-103mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size Ø104mm. Fits saddle Ø98-105mm.