Panel clip, Ø18mm x 21mm, interior panel, universal.

Panel clip, door trim, Ø18mm x 21mm, universal.

Panel clip, door trim, Ø18mm x 21mm, BMW, Renault.

Panel clip, Ø17mm x 18mm, GM.

Panel Clip, Ø13mm x 21mm, Door Panel, Land Rover - Pack of 20.

Locking nut, Ø10mm x 10mm, universal.

Insert locking nut, Ø10mm x 10mm, VW.

Under bonnet insulation fixing clip, black, Ø25mm x 30mm, universal.

Under bonnet insulation fixing clip, black, Ø25mm x 15mm, universal.

Countersunk self tapping screws with Pozi head. Manufactured to meet DIN 7982. Supplied in resealable bag.

Zinc plated hexagon headed setscrews. Manufactured to DIN 933 with high tensile strength grade 8.8 steel.

Zinc plated hexagon headed setscrews. Manufactured to DIN 933 with high tensile strength grade 8.8 steel.

Bi-Metal blade suitable for cutting through thin sheet metals, pipes and profiles. Colour-coded bayonet type fitting allows for easy identification. Milled and side set teeth allow for a relatively rough and efficient cut into thin sheet metals, pipes and profiles, plastics, window frames. Works with most popular brands of reciprocating saws.

Pure bristles with square cut ends, held by chrome ferrules. Painted composite handles.

SS301A Grade stainless steel hose clips. Manufactured to DIN 3017.

Superior quality SDS Plus drill bits suitable for a variety of applications. Drills are fully hardened and ground.

Zinc plated DIN 7504N self-drilling pan head Phillips screw. Pack of 100. Supplied in resealable bag.

An instant seal at low pressure. Used for fine and coarse threads up to 75mm(3") in diameter. 60 Hours to fully cure, which allows time to realign joints. Contains PTFE which seals against oils, gases and chemicals. Tear and shred resistant. Supplied in a concertina applicator.

Suitable for removing pin stripes or double-sided tape from panel work prior to refinishing. Waved design to increase airflow and thus prolonging life. 5/16”UNF Fitting with 6mm mandrel adaptor to also allow use with a standard drill.

Black anodised aluminium rivets. Manufactured to DIN 7337.

Versatile backing pad, Ø75mm with M14 thread, to accept interchangeable, Ø80mm hook-and-loop backed buffing and polishing foam heads.

Soft and flexible edges for extra accessibility. Suitable for air and electric tools with 5/16"UNC thread.

Soft and flexible edges for extra accessibility. Suitable for air and electric tools with 5/16"UNF thread. Compatible with Ø75mm Hook-and-Loop Discs.

Soft and flexible edges for extra accessibility. Suitable for Ø75mm abrasive discs.

General-purpose flat cutting disc recommended for use with Sealey and other manufacturers of grinding and cutting power tools. Suitable for cutting stainless steel. Supplied in metal tin.

Zinc plated P-clips manufactured to DIN 3016. Holds and secures cables, piping and tubing. Rubber lined to prevent damage. Standard 8mm bolt hole for fixing.

Mini hose clips used predominantly on fuel pipes. Can also be used on any small gauge hose. Zinc plated and manufactured to DIN 3017.

RoHS compliant heat shrink tubing. Shrink ratio 2:1 when heated to 90°C.

HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 165mm working length. Supplied in a plastic wallet.

HSS roll forged blacksmith’s drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 145mm working length. Supplied in a plastic wallet.