Welded steel wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 10°. Suitable for heavy goods vehicles not exceeding 20 Tonne gross weight.

Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 2 Tonne.

Compact automotive wheel chocks for use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.

Black powder coated heavy-duty tubular frame. Pre-drilled holes allow chock to be bolted to either the floor or a trailer to prevent movement while being worked on or transported. Suitable for motorcycles with up to 95mm wide tyres.

Black powder coated heavy-duty tubular frame. Pre-drilled holes allow chock to be bolted to either floor or trailer to prevent movement while being worked on or transported. Suitable for motorcycles with up to 165mm wide tyres.

Black powder coated heavy-duty tubular frame. Pre-drilled holes allow chock to be bolted to either floor or trailer to prevent movement while being worked on or transported. Suitable for motorcycles with up to 140mm wide tyres.

Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne.

Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.

Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.

Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.

High-density plastic with anti-slip steel bar. Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer.

Features adjustable pivoting wheel guide, which secures front wheel within chock. Three adjustable heights depending on diameter of wheel. Suitable for wheels with tyre widths 90-130mm and diameters Ø17"-21"(Ø430-535mm). Base can be permanently bolted to the floor (fixings included), and features a detachable upper assembly that can be easily stored and re-attached when required, stabilizing...

Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement, with a maximum weight of 20 Tonnes, when being jacked on a level surface or parked on an incline not exceeding 10°. Sold as singles but must be used in pairs. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres with diameters...

Tubular wheel chock supports the front wheel of the motorcycle when in transit or storage. Fully adjustable to fit wheels Ø15"-21"(Ø380-535mm). Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Chock can be used freestanding or fixed to any hard surface.

Heavy-duty nylon reinforced rubber wheel chock. Manufactured to be comparable the current DVSA requirements. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter Ø1500-1800mm. Suitable...

Manufactured from 3.5mm steel section. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.

Manufactured from strong, durable powder coated steel and steel mesh. Provides safe and easy ramp access for in-line wheeled vehicles. Suitable for loading/unloading motorbikes or wheelbarrows from vans or trailers. Features a strap and hook to help secure ramp while in use. Folding design allows compact storage when not in use.

Securely holds your motocross bike on to a trailer or van, with the Fast Lock system, no ratchet straps or wheel chock required. Provided with mounting plates and quick release latches, allowing for fast installation and removal of the clamp. Each mounting plate has a D-ring creating additional anchor points to the trailer floor.

Manufactured from durable polypropylene.

Rubber wheel chocks weighing 14.56kg (7.28kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.

Two welded steel wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for heavy goods vehicles.

Features adjustable pivoting wheel guide, which secures rear wheel within chock. Four adjustable depths depending on diameter of wheel. Suitable for wheels with tyre widths 130-180mm and diameters Ø14"-21"(Ø355-535mm). Frame bolts to the floor stabilising motorcycles without the need of side or centre-stands.

Manufactured from strong, durable powder coated steel. Provides safe and easy ramp access for in-line and multi axle vehicles. Suitable for loading/unloading motorbikes, quads, ride-on lawnmowers and mini tractors from vans or trailers. Features a chain and hook to help secure ramps while in use. Folding design allows compact storage when not in use.

Manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles. Suitable for loading/unloading trikes, quad bikes, ride-on lawnmowers or any other three or four wheeled vehicle up to a maximum of 680kg (Note individual ramp section capacity is 226kg). Features safety securing chains and extended claws at one end to help secure...

Manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles. Suitable for loading/unloading quad bikes, ride-on lawnmowers or any other four wheeled vehicle up to a maximum of 680kg. Features extended claws at one end to help secure ramp when in use. Folding design for compact storage.

Modular design is ideal for portability, storage and enables user to change length. Manufactured from durable polypropylene. Allows access to the underside of the vehicle. 350mm wide ramps for broad range of vehicles - recommended maximum tread width 290mm. 4 Tonne Maximum capacity - 2 Tonne per ramp. Easy to remove and reattach the simple interlocking sections.

Compact, convenient and innovative 3 Tonne (pair) rated car ramps (maximum single axle weight of 1800kg). Supplied with four stands and removable lifting beam, designed to safely raise a vehicle completely off the ground, giving a clear workspace between vehicle and floor. Designed so the track width can be adjusted to fit various makes and model of cars with maximum tyre width of 380mm....