Filter
Filter
Popular Products
Subcategory
View Left Column
283 products
Grid
Grid-2
List
List-2
Catelog
Active filters
1/2"Sq Drive Chrome Molybdenum steel bit holder with S2 steel bits. Phosphate finish for corrosion resistance. Suitable for use with any impact tool. Supplied in storage tray.
£20.80Price
£21.51Price
Storage for 10mm hex drive bits. Composite holder with strong magnetic base helps maintain a tidy workstation. Ideal for tool chests or any ferrous surface. Holds up to 42 bits.
£21.51Price
WallDrive® sockets are manufactured from Chrome Vanadium steel with electrodeposition finish for added corrosion resistance. Suitable for use with impact type air wrenches. Supplied in storage case.
£21.51Price
Durable, high-impact ABS socket holder with strong magnetic backing. Holds up to 13 standard and 13 deep 1/4"Sq drive sockets up to 14mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£21.51Price
Flexibility allows tray to adjust to the surface it is laid on. Unique anti-static rubber design grips tools whilst also protecting the paint finish of a car. Can be used as mobile tool storage around the garage or workshop or alternatively used for tidy in-tray storage in rollcabs and toolboxes. Oil and water-resistant.
£40.17Price
£21.91Price
Manufactured from drop-forged fine grained carbon steel. Fibreglass shaft with graphite core for improved strength and durability. Textured rubber grip ensures a secure hold and over strike protection. Manufactured and tested to BS2945:1995. Includes blade cover.
£21.91Price
1/2"Sq Drive Chrome Molybdenum steel bit holder with S2 steel bits. Phosphate finish for corrosion resistance. Suitable for use with any impact tool. Supplied in storage tray.
£22.23Price
Stainless steel tray with Ø80mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down.
£22.58Price
Steel panel comprising of four 430mm rails and clips suitable for retaining 1/4", 3/8" and 1/2"Sq drive sockets. Fitted with carry handle.
£22.95Price
Steel panel comprising of four 430mm rails and clips suitable for retaining 1/4", 3/8" and 1/2"Sq drive sockets. Fitted with carry handle.
£22.95Price
Manufactured from Chrome Molybdenum steel with manganese phosphate finish for added resistance from corrosion. Low profile for use in areas that may otherwise be inaccessible. Supplied in storage tray.
£24.39Price
£34.44Price
Hardened and tempered Chrome Vanadium steel shafts with a fully polished satin finish. Tough, composite handle with rubberised comfort grip. Long and short elements for each size. Includes hanging holes and storage stand.
£34.44Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£25.11Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£25.82Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£26.54Price
£27.10Price
1/2"Sq Drive Chrome Molybdenum steel bit holder with S2 steel bits. Phosphate finish for corrosion resistance. Suitable for use with any impact tool. Supplied in storage tray.
£27.10Price
£27.98Price
Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. Standard depth WallDrive® sockets allow a transfer of up to 30% more torque to the fixing.
£27.98Price
£27.98Price
Manufactured from Chrome Vanadium steel with electrodeposition finish for added corrosion resistance. WallDrive® sockets selected on DuoMetric® principle. Suitable for use with impact type air wrenches. Supplied in storage case.
£27.98Price
£28.70Price
Hardened and tempered Chrome Vanadium steel shafts with a polished satin finish. Tough, composite, comfort grip handle allows extra torque to be applied to the fixing. Each handle incorporates either a long TRX-Star* and short security TRX-Star* element, or a long ball-end hex and short hex element. Supplied in storage case.
£28.70Price
£30.13Price
Stainless steel trays with Ø90mm magnets in non-marking composite cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface such as toolboxes and even works upside-down. Wall mounting magnetic tool holders are ideal for holding spanners, screwdrivers etc. Heavy-duty, 5-section magnetic pick-up tool with Ø12mm magnet.
£30.13Price
Durable, high-impact ABS socket holder with strong magnetic backing. Holds up to 15 standard and 15 deep 3/8"Sq drive sockets up to 21mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£30.85Price
£31.57Price
Adjustable rigid dividers for the organised storage of a wide variety of pliers. Holds up to 24 pliers. Manufactured from ABS plastic. Ideal for using in tool chest drawers.
£31.57Price
Manufactured from Chrome Molybdenum steel with a polished satin finish. Removes rusted, damaged and severely rounded hex head fasteners with ease. Patented twist design on short-arm grips tighter as they turn preventing fasteners from rounding. Keys range in length from 88mm to 225mm and in size from 1/16" to 3/8". Ball-end allows key to drive fixing at up to 25°. Supplied in easy-access case...
£31.57Price
Manufactured from Chrome Molybdenum steel with a polished satin finish. Removes rusted, damaged and severely rounded hex head fasteners with ease. Patented twist design on short-arm grips tighter as they turn preventing fasteners from rounding. Keys range in length from 88mm to 225mm and in size from 1.5mm to 10mm. Ball-end allows key to drive fixing at up to 25°. Supplied in easy-access case...
£31.57Price
£31.89Price
Tool Tray with Screwdriver Set. Suitable for selected Superline PRO® and Premier tool chests.
£31.89Price
Durable, high-impact ABS socket holders with strong magnetic backing. Holds up to 19 standard 1/2"Sq drive sockets up to 27mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£33.01Price
£33.72Price
Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. Standard depth WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. Supplied in storage case.
£33.72Price
Hardened and heat treated Chrome Molybdenum steel impact sockets with a phosphate finish for corrosion resistance. WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. Low profile sockets with a depth of just 28mm, ideal for use in any application where access is restricted. Suitable for use with air/electric impact guns. Supplied in storage case.
£35.16Price
£35.38Price
Heavy-duty pick axe manufactured using rolled, forged alloy steel that is hardened and tempered with a black painted finish. The fibreglass handle has a solid core with a rubber grip. The chisel end is great for breaking hard ground, whilst the pointed end is perfect for breaking light concrete.
£35.38Price
£63.81Price
Tool tray with screwdriver set. Suitable for tool chest Model No's AP3503TB, AP3505TB and AP3508TB.
Contents: Precision Screwdrivers; Slotted - 2 x 50, 2.5 x 50, 3 x 50mm, Phillips - #00 x 50, #0 x 50, #1 x 50mm, TRX-Star* - T10 x 50, T15 x 50mm, Hammer-Thru Screwdrivers; Slotted - 5.5 x 100, 6.5 x 150, 8 x 175mm, Phillips - #1 x 75, #2 x 100, #3 x 150mm, Ratchet Driver Set 6pc, Impact Driver...
£63.81Price