Filter
Filter
Popular Products
Subcategory
View Left Column
219 products
Grid
Grid-2
List
List-2
Catelog
Active filters
European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at two thirds the weight. Drop-forged high carbon steel jaws with tool steel spring.
£22.23Price
Stainless steel tray with Ø80mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down.
£22.58Price
Steel panel comprising of four 430mm rails and clips suitable for retaining 1/4", 3/8" and 1/2"Sq drive sockets. Fitted with carry handle.
£22.95Price
Steel panel comprising of four 430mm rails and clips suitable for retaining 1/4", 3/8" and 1/2"Sq drive sockets. Fitted with carry handle.
£22.95Price
Heat treated and hardened Chrome Vanadium steel shafts. Fully polished black chrome finish with machined and lacquered heads. Cut-away tips allow sockets to be driven with shaft offset of up to 10°. Deep knurling on shafts allows extra grip when spinning off fixings. Spring-ball socket retainers.
£23.91Price
Manufactured from Chrome Molybdenum steel with manganese phosphate finish for added resistance from corrosion. Low profile for use in areas that may otherwise be inaccessible. Supplied in storage tray.
£24.39Price
£24.71Price
Suitable for producing single or double flares on copper, brass or thin walled aluminium pipe. Supplied with 2-piece screw-type 45° flare press and seven double flare dies. Packed in tough storage case. Not suitable for steel pipe.
£24.71Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Cut-away tips allow sockets to be driven with shaft offset of up to 10°. Deep knurling on shafts allow extra grip when spinning off fixings. Spring-ball socket retainers.
£25.11Price
European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at two thirds the weight. Drop-forged high carbon steel jaws with tool steel spring.
£25.11Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£25.11Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£25.82Price
£26.54Price
Forged Chrome Vanadium steel extension. Hardened, tempered and chrome plated for corrosion resistance. Fitted with spring-ball socket retainer.
£26.54Price
Anodised aluminium socket rail with nylon clips. Strong magnet with protective covering attaches to any ferrous surface. Includes Metric/Imperial sizing labels. Holds up to 13 sockets. Suitable for retaining 1/4"Sq drive sockets.
£26.54Price
£27.10Price
1/2"Sq Drive Chrome Molybdenum steel bit holder with S2 steel bits. Phosphate finish for corrosion resistance. Suitable for use with any impact tool. Supplied in storage tray.
£27.10Price
£27.98Price
Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. Standard depth WallDrive® sockets allow a transfer of up to 30% more torque to the fixing.
£27.98Price
£27.98Price
Manufactured from Chrome Vanadium steel with electrodeposition finish for added corrosion resistance. WallDrive® sockets selected on DuoMetric® principle. Suitable for use with impact type air wrenches. Supplied in storage case.
£27.98Price
£28.70Price
Forged Chrome Vanadium steel shaft, heat treated and chrome plated with mirror finish. Spring-ball socket retainer. Deep knurling on shaft allows extra grip when spinning off fixings. Spring-ball socket retention.
£28.70Price
£29.41Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allow extra grip when spinning off fixings. Spring-ball socket retainers. Supplied in storage tray.
£29.41Price
£30.13Price
Stainless steel trays with Ø90mm magnets in non-marking composite cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface such as toolboxes and even works upside-down. Wall mounting magnetic tool holders are ideal for holding spanners, screwdrivers etc. Heavy-duty, 5-section magnetic pick-up tool with Ø12mm magnet.
£30.13Price
Durable, high-impact ABS socket holder with strong magnetic backing. Holds up to 15 standard and 15 deep 3/8"Sq drive sockets up to 21mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£30.85Price
£31.57Price
Adjustable rigid dividers for the organised storage of a wide variety of pliers. Holds up to 24 pliers. Manufactured from ABS plastic. Ideal for using in tool chest drawers.
£31.57Price
£31.57Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Cut-away tips allow sockets to be driven with shaft offset of 10°. Deep knurling on shafts allow extra grip when spinning off fixings. Spring-ball socket retainers. Supplied in storage tray.
£31.57Price
Shell moulded cast steel handle with high quality drop-forged carbon steel jaws. One-piece head design for added strength.
£32.29Price
Durable, high-impact ABS socket holders with strong magnetic backing. Holds up to 19 standard 1/2"Sq drive sockets up to 27mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£33.01Price
£33.48Price
Powder coated aluminium body. Operates with a simple plier action. Ratchet cutting action and quick release mechanism. Heat treated stainless steel cutting blade. Fitted with safety lock and comfort grip handles. Suitable for plastic pipe from Ø6-42mm.
£33.48Price
£33.72Price
Manufactured from Chrome Vanadium steel, hardened, tempered and with a phosphate finish for added corrosion resistance. Standard depth WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. Supplied in storage case.
£33.72Price
£34.28Price
Tubing kit suitable for cutting and flaring copper, brass or thin walled aluminium pipe. Includes screw-type tube cutter with die-cast frame and integral deburring tool. Supplied with 2-piece screw-type 45° flare press and seven double flare dies. Packed in storage case. Not suitable for steel pipe.
£34.28Price
European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at two thirds the weight. Drop-forged high carbon steel jaws with tool steel spring.
£34.44Price
Hardened and heat treated Chrome Molybdenum steel impact sockets with a phosphate finish for corrosion resistance. WallDrive® sockets allow a transfer of up to 30% more torque to the fixing. Low profile sockets with a depth of just 28mm, ideal for use in any application where access is restricted. Suitable for use with air/electric impact guns. Supplied in storage case.
£35.16Price
Manufactured from Chrome Molybdenum steel with manganese phosphate finish for added corrosion resistance. Features specially machined flutes in the walls of the socket to enable use on up to 85% rounded fasteners. This not only provides added strength but also prevents damage to worn or rusted fixings. Suitable for use with air/electric impact guns. Supplied in storage case.
£51.04Price