Filter
Filter
Popular Products
Subcategory
View Left Column
307 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Manufactured from Beryllium Copper. Die forged. Contoured handles with soft grip to maximize comfort and control. Hanging hole for safe storage.
£27.47Price
£27.47Price
Manufactured from Beryllium Copper. Die forged. Contoured handles with soft grip to maximize comfort and control. Hanging hole for safe storage.
£27.47Price
£27.90Price
General-purpose mallet. Gives a gentle but firm blow with little rebound.
£27.90Price
£28.70Price
Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness.
£28.70Price
£28.70Price
Forged Chrome Vanadium steel shaft, heat treated and chrome plated with mirror finish. Spring-ball socket retainer. Deep knurling on shaft allows extra grip when spinning off fixings. Spring-ball socket retention.
£28.70Price
£29.41Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allow extra grip when spinning off fixings. Spring-ball socket retainers. Supplied in storage tray.
£29.41Price
£47.85Price
Manufactured from drop-forged fine grained carbon steel. Heat treated, hardened and tempered with precision ground polished striking face. Straight-grain hickory handle. Manufactured and tested to BS 876.
£47.85Price
Manufactured from drop-forged fine grained carbon steel. Heat treated, hardened and tempered with precision ground polished striking face. Domed strike zone for power and efficiency. Fibreglass shaft with graphite core for improved strength and durability. Textured rubber grip for secure handling. Manufactured and tested to BS 876.
£29.49Price
Manufactured from drop-forged fine grained carbon steel. Heat treated, hardened and tempered with precision ground polished striking face. Straight-grain hickory handle. Manufactured and tested to BS 876.
£29.89Price
£30.13Price
Stainless steel trays with Ø90mm magnets in non-marking composite cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface such as toolboxes and even works upside-down. Wall mounting magnetic tool holders are ideal for holding spanners, screwdrivers etc. Heavy-duty, 5-section magnetic pick-up tool with Ø12mm magnet.
£30.13Price
£30.29Price
Forged one-piece steel hammer head and shaft. Lightweight design yet incredibly strong. Shock reducing textured rubber grip. Manufactured and tested to BS 876.
£30.29Price
Durable, high-impact ABS socket holder with strong magnetic backing. Holds up to 15 standard and 15 deep 3/8"Sq drive sockets up to 21mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£30.85Price
£31.57Price
Adjustable rigid dividers for the organised storage of a wide variety of pliers. Holds up to 24 pliers. Manufactured from ABS plastic. Ideal for using in tool chest drawers.
£31.57Price
£31.57Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Cut-away tips allow sockets to be driven with shaft offset of 10°. Deep knurling on shafts allow extra grip when spinning off fixings. Spring-ball socket retainers. Supplied in storage tray.
£31.57Price
£31.89Price
Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness.
£31.89Price
Manufactured from Beryllium Copper. Die forged. Contoured handles with soft grip to maximize comfort and control. Hanging hole for safe storage.
£32.26Price
£47.85Price
Manufactured from drop-forged fine grained carbon steel. Heat treated, hardened and tempered with precision ground polished striking face. Domed strike zone for power and efficiency. Fibreglass shaft with graphite core for improved strength and durability. Textured rubber grip for secure handling. Manufactured and tested to BS 876.
£47.85Price
£32.69Price
Malleable iron head of extra heavy construction fitted with two pure electrolytic copper faces. Replacement copper faces available.
£32.69Price
£32.69Price
Forged one-piece of steel hammer head and shaft. Lightweight design yet incredibly strong. Shock reducing textured rubber grip. Manufactured and tested to BS 876.
£32.69Price
Durable, high-impact ABS socket holders with strong magnetic backing. Holds up to 19 standard 1/2"Sq drive sockets up to 27mm. Ideal for use in tool chest drawers or can be attached to any ferrous surface. Allows you to maintain a tidy workstation with sockets always to hand.
£33.01Price
£33.45Price
£33.48Price
Manufactured from fine grained alloy steel, heat treated, induction-hardened and tempered with double precision ground polished striking face. Fitted with straight-grained hickory shaft. Manufactured in accordance with BS 876.
£33.48Price
£52.64Price
Manufactured from drop-forged fine grained carbon steel. Heat treated, hardened and tempered with precision ground polished striking face. Straight-grain hickory handle. Manufactured and tested to BS 876.
£52.64Price
£35.38Price
Heavy-duty pick axe manufactured using rolled, forged alloy steel that is hardened and tempered with a black painted finish. The fibreglass handle has a solid core with a rubber grip. The chisel end is great for breaking hard ground, whilst the pointed end is perfect for breaking light concrete.
£35.38Price
Malleable iron head fitted with one face of pure electrolytic copper and one face of compressed buffalo hide. Replacement faces available.
£35.88Price
£36.68Price
Chrome plated zinc head with two durable white nylon faces. Replacement faces available with alternative hardness.
£36.68Price
Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Dual feature allows off-centre driving of sockets at up to 10° from centre axis or at 0°. Supplied in storage tray.
£37.31Price
£37.31Price
Steel tray comprising of five 430mm rails and clips suitable for retaining 1/4", 3/8" and 1/2"Sq drive sockets. Also includes two 10-piece power bit holders. Tray features carry handles and hanging holes for workshop storage.
£37.31Price
£37.47Price
Manufactured from fine grained carbon steel. Heat treated, induction-hardened and tempered with precision ground polished striking face. Fitted with fibreglass shaft and contoured shock-absorbing rubber grip. Manufactured in accordance with BS 876.
£37.47Price
£38.24Price
Manufactured from Beryllium Copper. Die forged. Contoured handles with soft grip to maximize comfort and control. Hanging hole for safe storage.
£38.24Price