Adapter suitable for all farm jacks so the jack can be used on Land Rover Defenders with jacking point tubes.

Simple and effective design makes it a perfect tool for emergency lifting of a vehicle for maintenance, repairs and tyre changing. Easily stored and transported within your vehicle, ready for when needed. Fine rolled thread and precision made thrust bearing for long life and smooth operation. The pivoted crank handle allows for low ground clearance, is long enough to clear the vehicles bodywork...

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle.

Off-road base compatible with most high-lift farm jacks. Designed to spread ground force of jack to prevent sinkage on soft surface. Includes handle coupler to lock most high lift farm jacks handle in position for secure transportation. Base size 184 x 185mm.

Weight-for-weight, this straps is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U...

Folding design saves space and makes these axle stands ideal for occasional use. Welded steel construction for increased strength and safety. Folding design for space efficient storage. Fitted with double-locking safety pin. Sold in pairs.

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied in a tough storage case and suitable for recovery trucks. The case prevents the jack from damaging other items and also prevents the spread of grease, oil or dirt.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle.

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U...

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U...

Manufactured from heat treated, drop-forged steel for added strength. Suitable for clamping, binding, anchoring and tying down large loads. Ideal for farmers and commercial drivers. Fitted with 354mm handle for extra leverage.

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.

Used for lifting on contoured and round lifting surfaces. Provides more access underneath the vehicle making it easier to work on. Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. Suitable for use with SEALEY Viking 4 Tonne Jacking Beams.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied in a tough storage case and suitable for recovery trucks. The case prevents the jack from damaging other items and also prevents the spread of grease, oil or dirt.

Ratchet type axle stand with cast iron support post and tough steel-plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs.

Ratchet type axle stand with cast iron support post and tough steel-plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs.

Ratchet type axle stand with cast iron support post and tough steel-plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs.

Ratchet type axle stands with cast iron support posts and tough steel plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U...

Steel chassis with welded castor supports and one-piece hydraulic unit. Fitted with overload valve, carry handle and finger cover for extra safety. Includes one-piece pumping handle. Ideal for when storage space is limited or as an emergency mobile jack.

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.