Filter
Filter
Popular Products
Subcategory
View Left Column
75 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£139.60Price
Lightweight aluminium frames with tough steel mesh. Adjustable guard protects the user and/or passer by from being injured if workpiece is accidently dislodged under load. Bolts onto either side of the table and features five height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up quickly and...
£139.60Price
£145.19Price
Lightweight steel frame with 4.8mm Polycarbonate screen. Adjustable guard protects the user and/or passer-by from being injured if workpiece is accidentally dislodged under load. Bolts onto either side of the table and features four height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up...
£145.19Price
£145.19Price
Cast steel frame with machined steel toothed arbor. 4-Position table with varying sizes of cut-outs for pressing operations. Throat Depth: 114mm. Max Table Height: 95mm. Suitable for repetitive manufacturing operations.
£145.19Price
£178.70Price
Lightweight steel frame with tough 4.8mm Polycarbonate screen. Adjustable guard protects the user and/or passer-by from being injured if workpiece is accidentally dislodged under load. Bolts onto either side of the table and features six height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up...
£178.70Price
£179.49Price
Made from high quality steel with a powder coated paint finish, preventing corrosion for years to come. Adjustable table height relocation of two pins allows the table to be set at your optimum working height. Designed to remove and install bushings, bearings, ball joints, universal joints, pulleys and gears. Includes two arbor plates, assisting alignment and strengthening the press point...
£179.49Price
£189.88Price
Set of eight press pins, 2-20 Tonne capacity, with ram adaptor and yellow phosphate finish for added corrosion resistance. Presented in mountable bracket with fixing points. Suitable for use with presses which have a female ram assembly diameter of Ø25mm and are secured with a bolt. These pins are suitable for the following Sealey model numbers manufactured from October 2008 onwards; YK20F,...
£189.88Price
£189.88Price
Lightweight steel frame with tough 4.8mm Polycarbonate screen. Adjustable guard protects the user and/or passer-by from being injured if workpiece is accidentally dislodged under load. Bolts onto either side of the table and features six height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up...
£189.88Price
£201.05Price
Lightweight steel frame with tough 4.8mm Polycarbonate screen. Adjustable guard protects the user and/or passer-by from being injured if workpiece is accidentally dislodged under load. Bolts onto either side of the table and features six height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up...
£201.05Price
£238.55Price
Manufactured from heavy-duty steel for added strength. Easily converts a forklift into a mobile crane. Fitted with opening hook for use with multiple attachments. Safely secures to forklift using two heavy-duty thumb screws.
£238.55Price
£275.25Price
Made from a high quality steel with a powder coated paint finish to help corrosion resistance.
£275.25Price
£301.60Price
Cast steel frame with machined steel toothed arbor. 4-Position table with varying sizes of cut-outs for pressing operations. Throat Depth: 150mm. Max Table Height: 170mm. Suitable for repetitive manufacturing operations.
£301.60Price
£357.46Price
Lightweight steel frame with tough 6mm Polycarbonate screen. Adjustable guard protects the user and/or passer-by from being injured if workpiece is accidentally dislodged under load. Bolts onto either side of the table and features six height increments, allowing the workpiece to be placed onto table with no obstruction. One-way spring loaded locking clips then allow the guard to be pulled up...
£357.46Price
£371.01Price
High quality industrial press, supplied with pressure gauge, ideal for pressing, bending and extruding. Suitable for many automotive and industrial applications.
£371.01Price
£406.92Price
Made from a high quality steel with a powder coated paint finish to help corrosion resistance. Supplied in KD form.
£406.92Price
All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle.
Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.
£418.89Price
£446.82Price
High quality industrial press ideal for pressing, bending and extruding. Detachable pump and ram allow hydraulics to be used for other purposes when press is not in use. The C-frame design provides easy-access to die from three sides, as well as permitting loading and unloading of wide and irregular workpieces. Supplied with flat pressing plates and extension tubes.
£446.82Price
All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle.
Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.
£454.80Price
£502.69Price
Cast steel frame with machined steel toothed arbor. 4-Position table with varying sizes of cut-outs for pressing operations. Throat Depth: 178mm. Max Table Height: 280mm. Suitable for repetitive manufacturing operations.
£502.69Price
£510.66Price
Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. Supplied with gauge.
£510.66Price
£526.62Price
Made from high quality steel with a powder coated paint finish to help corrosion resistance. Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. Includes two table plates. Supplied with gauge.
£526.62Price
£601.64Price
Made from a high quality steel with a powder coated paint finish to help corrosion resistance. Supplied in KD form.
£601.64Price
£638.34Price
Suitable for use by the serious enthusiast and professional alike. Made from a high quality steel with a powder coated paint finish to help corrosion resistance. Supplied in KD form. Detachable pump and ram allowing hydraulics to be used for other purposes when press is not in use. Supplied with gauge.
£638.34Price
£740.48Price
Steel frame construction with side mounted, air motor powering hydraulic pump unit. Sliding hydraulic ram assembly giving 403mm of lateral travel for off-centre pressing applications. Fitted with ram pressure gauge and supplied with flat pressing plate/V-blocks.
£740.48Price
Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy...
£748.48Price
Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy...
£781.99Price
£842.62Price
Heavy-duty steel frame construction with handle operated hydraulic pump unit. Screw adjustable ram and adjustable work area with removable tray. Frame head fitted with ram pressure gauge. Storage for press pins included in frame. Supplied with press pins, flat pressing plate/V-blocks.
£842.62Price
Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy...
£893.71Price
£1,085.22Price
Made from a high quality steel with a powder coated paint finish to help corrosion resistance. Fully Welded frame. Sliding hydraulic ram assembly giving 176mm of lateral travel for off-centre pressing applications. Frame head fitted with ram pressure gauge. Supplied with flat pressing plate/V-blocks.
£1,085.22Price
£1,149.06Price
Steel frame construction with side mounted hydraulic pump unit. Sliding hydraulic ram assembly giving 200mm of lateral travel for off-centre pressing applications. Includes flat pressing plate/V-blocks. Fitted with ram pressure gauge.
£1,149.06Price
Fully certified and approved to comply with MOT requirements. 1.6m Load arm reach. Beam Lift: 95-300mm. 2-Stage mechanical safety lock and telescopic finger guards. Spring loaded flat arms with roller bearings when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied....
£1,396.45Price