Filter
Filter
Popular Products
Subcategory
View Left Column
105 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Tyre saving blocks help prevent flat spots or damage to car, caravan or motorhome tyres whilst they are stationary for prolonged periods of time, such as over winter. Maximum weight capacity 5 Tonne per pair. Saves installing winter storage wheels. Increased stability, as wheels cannot easily be moved in either direction without deliberate intent to do so.
£21.98Price
£24.85Price
High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 1L. Includes two female to male screw adaptors.
£24.85Price
£29.00Price
High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 2L. Includes two female to male screw adaptors.
£29.00Price
Composite 3ft board fitted with 2m of 7-core cable and 12V N-type plug. Includes two E-Approved reflectors and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light).
Important: Standard trailer boards should not be used in conjunction with cycle carriers.
£34.43Price
£34.43Price
Dust suppression tank with 8L working capacity. Effective at supressing dust while using cut-off saws, bench saws and floor saws in all working environments. Automatic pressure release valve stops pressure building higher than 3bar for optimum use. Includes 3m hose with quick release coupling.
£34.43Price
£36.26Price
Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.
£36.26Price
Ideal for campervans and caravans (capacity 5 Tonne per pair). Not to be used as a lifting ramp for the purpose of working underneath the vehicle. Suitable for single axle vehicles only. Raise wheels to various heights using different points on each ramp, to level vehicle out. Anti roll off step at end of ramp. Durable and easy-to-clean UV resistant high-density polyethylene with a non-slip...
£36.34Price
Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with three adaptors.
£71.77Price
£40.17Price
Composite board fitted with 5m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Pre-drilled mounting points (905mm centres).
£40.17Price
£40.17Price
Universal fitment for roof racks providing a safe and easy way to secure ladders. Corrosion resistant finish. Suitable for trades where ladders need to be transported safely for on site applications. Supplied with two heavy-duty iron padlocks for security. Made in the UK.
£40.17Price
Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with four adaptors.
£62.20Price
Composite board fitted with 6m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles, two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light) and fog lamp. Pre-drilled mounting points (905mm centres).
£47.83Price
£49.75Price
Manufactured from a hard-wearing rubber compound, which grips on the smoothest of surfaces. Prevents ladders from slipping and/or sinking into soft ground during use. Helps protect flooring on delicate surfaces. Overall width of 960mm makes this suitable for use with all popular ladders.
£49.75Price
£51.66Price
Dust suppression tank with 14L working capacity. Effective at supressing dust while using cut-off saws, bench saws and floor saws in all working environments. Automatic pressure release valve stops pressure building higher than 3bar for optimum use. Before use 20 full pumps will allow for 1-1.5 minutes of operation. Includes attached strap for easy transportation, a 3m hose with quick release...
£51.66Price
£51.82Price
Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.
£51.82Price
£54.82Price
Heavy-duty wheel step gives safe and easy-access to engine or top of vehicle, ideal for 4x4s. Heavy gauge all steel construction folds for easy storage. Suitable for wheel diameters between 14" and 20" and will fit tyres up to 10" deep. Rubber topped platform for added grip and safety. Platform is height-adjustable (three mounting points 90mm apart).
£54.82Price
£55.01Price
Easy-to-install modern direct replacement magnetic trailer lighting set. 5-Function SMD LED rear cluster includes - Stop/Tail/Indicator/Number Plate Illumination/Reflector. Includes 2.5m of 7-core connecting cable and 7.5m main cable fitted with 12V 7-pin N-type plug. R10, CE and E-Marked.
£55.01Price
Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Adjustable automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£95.71Price
£59.80Price
Composite 4ft board fitted with 5m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors and two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector). Can easily adapt to 13-pin using Model No. TB44.
£59.80Price
£62.20Price
Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£62.20Price
£62.20Price
Safe and easy way to access a roof with your ladder. Lightweight aluminium design. Suitable for trades where ladders need to be used for on site applications. Features non-slip composite wheels and 'r'-shape hooks with anti-slip rubber feet. Made in the UK.
£62.20Price
£65.07Price
Aluminium framed stand-off, fits to any ladder. Offers superb stability at the top of a ladder with a wide span of 1000mm. Positions ladder 360mm away from work area. Fitted with rubber feet to help prevent slipping. Supplied with easy installation instructions.
£65.07Price
Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Automatic cut-out when water goes below minimum depth of 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£67.38Price
£69.86Price
Composite 4ft 6" board fitted with 6m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors, two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector) and fog light. Can easily adapt to 13-pin using Model No. TB44.
£69.86Price
EN 14183 Approved steps with 150kg capacity. Tubular metal construction with composite feet for added stability. Features two large anti-slip treads. Foam-cushioned hand rail for added comfort. Also suitable as a stool.
£69.86Price
£74.64Price
Solid wall hose for use on suction side of water pumps. For use with Model No. EWP050.
£74.64Price
£75.68Price
Lightweight, durable access ramp. Ideal for transporting goods up kerbs and steps. Fitted with two carry handles and rubber stoppers to prevent movement while in use. Features 600mm wide textured ramp surface providing additional grip. Maximum capacity 450kg.
£75.68Price
£76.56Price
Heat treated aluminium framed ladder stand-off improves stability and fits to any ladder. The "V" Type design can be used on flat surfaces, corners or over down pipes. Fitted with rubber feet to prevent slipping and positions ladder 250-400mm away from wall. Quick and easy to assemble.
£76.56Price
£76.56Price
Robust composite construction with non-slip surface. Three spring loaded wheels allow step to glide over floor, yet sit down firmly on rubber stops when load is applied.
£76.56Price
Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Minimum water depth of 40mm. Designed for operation in dense and dirty water. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.
£77.76Price