Filter
Filter
Popular Products
Subcategory
View Left Column
59 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Tyre saving blocks help prevent flat spots or damage to car, caravan or motorhome tyres whilst they are stationary for prolonged periods of time, such as over winter. Maximum weight capacity 5 Tonne per pair. Saves installing winter storage wheels. Increased stability, as wheels cannot easily be moved in either direction without deliberate intent to do so.
£21.98Price
£24.85Price
High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 1L. Includes two female to male screw adaptors.
£24.85Price
£29.00Price
High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 2L. Includes two female to male screw adaptors.
£29.00Price
Composite 3ft board fitted with 2m of 7-core cable and 12V N-type plug. Includes two E-Approved reflectors and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light).
Important: Standard trailer boards should not be used in conjunction with cycle carriers.
£34.43Price
£36.26Price
Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.
£36.26Price
Ideal for campervans and caravans (capacity 5 Tonne per pair). Not to be used as a lifting ramp for the purpose of working underneath the vehicle. Suitable for single axle vehicles only. Raise wheels to various heights using different points on each ramp, to level vehicle out. Anti roll off step at end of ramp. Durable and easy-to-clean UV resistant high-density polyethylene with a non-slip...
£36.34Price
Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with three adaptors.
£71.77Price
£40.17Price
Composite board fitted with 5m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Pre-drilled mounting points (905mm centres).
£40.17Price
Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with four adaptors.
£62.20Price
Composite board fitted with 6m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles, two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light) and fog lamp. Pre-drilled mounting points (905mm centres).
£47.83Price
£51.82Price
Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.
£51.82Price
£55.01Price
Easy-to-install modern direct replacement magnetic trailer lighting set. 5-Function SMD LED rear cluster includes - Stop/Tail/Indicator/Number Plate Illumination/Reflector. Includes 2.5m of 7-core connecting cable and 7.5m main cable fitted with 12V 7-pin N-type plug. R10, CE and E-Marked.
£55.01Price
Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Adjustable automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£95.71Price
£59.80Price
Composite 4ft board fitted with 5m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors and two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector). Can easily adapt to 13-pin using Model No. TB44.
£59.80Price
£62.20Price
Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£62.20Price
Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Automatic cut-out when water goes below minimum depth of 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£67.38Price
£69.86Price
Composite 4ft 6" board fitted with 6m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors, two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector) and fog light. Can easily adapt to 13-pin using Model No. TB44.
£69.86Price
£74.64Price
Solid wall hose for use on suction side of water pumps. For use with Model No. EWP050.
£74.64Price
£75.68Price
Lightweight, durable access ramp. Ideal for transporting goods up kerbs and steps. Fitted with two carry handles and rubber stoppers to prevent movement while in use. Features 600mm wide textured ramp surface providing additional grip. Maximum capacity 450kg.
£75.68Price
Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Minimum water depth of 40mm. Designed for operation in dense and dirty water. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.
£77.76Price
Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Minimum water depth of just 20mm. Designed for clean water although this pump will accept small particles up to 5mm. Automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£77.76Price
£77.76Price
Manufactured from corrosion resistant materials with a stainless steel motor case and Noryl® base cover. Ideal for pumping water straight from a water butt directly onto your garden. Supplied with a 2-piece aluminium swan neck extension pipe, adjustable flow control feature and snap on connector.
£77.76Price
Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Adjustable automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£114.86Price
Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Puddle pump with minimum water depth of just 2mm makes this ideal for flood recovery. Designed for clean water although these pumps will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general...
£82.94Price
£86.06Price
Water-resistant gilet with three carbon fibre heating elements. Heating elements are in the back and each side of the chest. Three different heat modes controlled by colour changing button (Blue – Low, White – Medium, Red – High). One-size-fits-all design with adjustable chest and waist size. Power bank not included but required, recommended 2A output for optimum use.
£86.06Price
Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Minimum water depth of just 20mm. Designed for clean water although this pump will accept small particles up to 5mm. Automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.
£88.13Price
Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Fitted with automatic cut-out. Minimum water depth of 40mm. Designed for operation in dense and dirty water. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.
£93.32Price
£98.51Price
Water-resistant jacket with three carbon fibre heating elements. Heating elements are in the back and each side of the chest. Three different heat modes controlled by colour changing button (Blue – Low, Green – Medium, Red – High). Power bank not included but required, recommended 2A output for optimum use.
£98.51Price
£98.51Price
Water-resistant jacket with three carbon fibre heating elements. Heating elements are in the back and each side of the chest. Three different heat modes controlled by colour changing button (Blue – Low, Green – Medium, Red – High). Power bank not included but required, recommended 2A output for optimum use.
£98.51Price
£98.51Price
Water-resistant jacket with three carbon fibre heating elements. Heating elements are in the back and each side of the chest. Three different heat modes controlled by colour changing button (Blue – Low, Green – Medium, Red – High). Power bank not included but required, recommended 2A output for optimum use.
£98.51Price