Sharpening disc for Model No. SMS2001M Drill Bit Sharpener.

Blade for Model No. DB02 Deburring Tool.

Sharpening blade for Model No. SMS2002C Chainsaw Blade Sharpener.

Punch set for Model No. SNA9821.

Die for Model No. SNA9821.

Fast, effective and efficient way of deburring holes, slots and edges. Features aluminium body with pocket-clip and rotating replaceable cutting blade for use on steel, copper, brass and plastic.

Combination silicone carbide sharpening stone with fine and medium grades. Supplied in a plastic box with pre-cut holes in the base which can be secured and hold the stone when in use, allowing for safe and easy use.

Sharpening wheel for Model No. SMS2004 Multipurpose Sharpener.

Ceramic grinding disc for Model No. SMS2003 Saw Blade Sharpener.

Diamond whetstone supplied in a handy storage case that unfolds to act as a handle. Suitable for the sharpening of knives, scissors, cutting blades, carbon steel, HSS, tungsten and carbide tools. Combination of 400 and 600Grit surfaces. Can be used dry or with water as a lubricant, no oils are necessary.

Composite handgrip with interchangeable swivel cutting bits. Spare cutter stored in handle. Suitable for deburring pipes and sheet materials.

Grinding wheel for Model No. SMS2008 Drill Bit Sharpener.

Useful For Scribing Parallel Lines, Circles and Arcs. Allows any size circle or arch to be made either with a steel rule or length of wood. Fast set up and allows for quick and accurate setting out and marking. Knurled screws Width 3/8"(10mm) to 1-1/4"(32mm). Pencil Holder in one piece to mark your work. Radius Lengths as required with your own made beam.

Fast, simple and effective way to sharpen your drill bits. Suitable for use with HSS Titanium, Cobalt and Carbon Steel ranging from Ø3-10mm. Easily fits to a drill with a 43mm collar (not to be used in hammer function).

Designed to clean internal pipe ends quickly and safely. Manufactured with alloy steel cutters to remove damaged metal and burrs. Features a 1/4"Hex shank for use with a drill or hex driver. Applicable for use on pieces from Ø3mm to 18mm in diameter. Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more.

Diamond coated grinding disc for Model No. SMS2003 Saw Blade Sharpener.

Designed to clean up and repair threaded fasteners and studding quickly and safely. Fitted with 3 x HSS blades to remove damaged metal and burrs. Features a 1/4"Hex shank for use with a drill or hex driver. Applicable for use on pieces from Ø3mm to Ø19mm in diameter. Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and...

Chrome Molybdenum steel blades with forged high carbon steel body. Hardened, tempered and chrome plated for rust resistance.

Composite 3ft board fitted with 2m of 7-core cable and 12V N-type plug. Includes two E-Approved reflectors and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Important: Standard trailer boards should not be used in conjunction with cycle carriers.

Dust suppression tank with 8L working capacity. Effective at supressing dust while using cut-off saws, bench saws and floor saws in all working environments. Automatic pressure release valve stops pressure building higher than 3bar for optimum use. Includes 3m hose with quick release coupling.

Turns an electric or air drill into a versatile nibbler suitable for cutting intricate shapes in various materials. Double end punch allows handle to be removed and re-attached to opposite side for longer periods of use.

Composite board fitted with 5m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Pre-drilled mounting points (905mm centres).

Diamond whetstone, for quick and easy sharpening of knives, chisels, scissors, cutting blades and other edged implements. Combination of 400 and 1000 grit surfaces. Whetstone will sharpen carbon steel, high-speed steel (HSS) and tungsten carbide. Can be used wet (with water as a lubricant) or dry. Supplied with an adjustable robust non-slip holder which can be used with stones from 135mm to...