High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 1L. Includes two female to male screw adaptors.

High quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to all brands of surface mounting pumps. Capacity: 2L. Includes two female to male screw adaptors.

Composite 3ft board fitted with 2m of 7-core cable and 12V N-type plug. Includes two E-Approved reflectors and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Important: Standard trailer boards should not be used in conjunction with cycle carriers.

Dust suppression tank with 8L working capacity. Effective at supressing dust while using cut-off saws, bench saws and floor saws in all working environments. Automatic pressure release valve stops pressure building higher than 3bar for optimum use. Includes 3m hose with quick release coupling.

Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.

Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with three adaptors.

Composite board fitted with 5m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles and two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light). Pre-drilled mounting points (905mm centres).

Manufactured from high-impact stainless steel for added durability and corrosion resistance. Pond pump suitable for creating garden water features. Also provides the important functions of filtration and water circulation which are necessary to maintain healthy plant and fish life. Supplied with four adaptors.

Composite board fitted with 6m of 7-core cable and 12V N-type plug. Includes two E-Approved reflective triangles, two 4-function lamp clusters (stop, tail, indicator and numberplate illumination light) and fog lamp. Pre-drilled mounting points (905mm centres).

Dust suppression tank with 14L working capacity. Effective at supressing dust while using cut-off saws, bench saws and floor saws in all working environments. Automatic pressure release valve stops pressure building higher than 3bar for optimum use. Before use 20 full pumps will allow for 1-1.5 minutes of operation. Includes attached strap for easy transportation, a 3m hose with quick release...

Solid wall hose for use on suction side of water pumps. Suitable for use with Ø25mm inlets and outlets.

Easy-to-install modern direct replacement magnetic trailer lighting set. 5-Function SMD LED rear cluster includes - Stop/Tail/Indicator/Number Plate Illumination/Reflector. Includes 2.5m of 7-core connecting cable and 7.5m main cable fitted with 12V 7-pin N-type plug. R10, CE and E-Marked.

Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Adjustable automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Composite 4ft board fitted with 5m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors and two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector). Can easily adapt to 13-pin using Model No. TB44.

Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Manufactured from corrosion resistant materials with steel motor case and polypropylene base cover. Max. Output: 100L(22gal)/min, Max. Head: 6m. Automatic cut-out when water goes below minimum depth of 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Composite 4ft 6" board fitted with 6m of 7-core cable and 12V 7-pin N-type plug. Includes two E-Approved triangle reflectors, two 5-function SMD LED rear square clusters (Stop/Tail/Indicator/Numberplate Illumination/Reflector) and fog light. Can easily adapt to 13-pin using Model No. TB44.

Solid wall hose for use on suction side of water pumps. For use with Model No. EWP050.

Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Minimum water depth of 40mm. Designed for operation in dense and dirty water. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water and dense liquids.

Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Minimum water depth of just 20mm. Designed for clean water although this pump will accept small particles up to 5mm. Automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Manufactured from corrosion resistant materials with a stainless steel motor case and Noryl® base cover. Ideal for pumping water straight from a water butt directly onto your garden. Supplied with a 2-piece aluminium swan neck extension pipe, adjustable flow control feature and snap on connector.

Manufactured from heavy-duty corrosion resistant materials with stainless steel motor case and polypropylene base cover. Minimum water depth of just 5mm. Designed for clean water although this pump will accept small particles up to 5mm. Adjustable automatic low water cut-out. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general transfer of water.

Manufactured from corrosion resistant materials with stainless steel motor case and Noryl® base cover. Fitted with automatic cut-out. Puddle pump with minimum water depth of just 2mm makes this ideal for flood recovery. Designed for clean water although these pumps will accept small particles up to 5mm. Suitable for the effective drainage of cellars, sinks, cisterns, baths and the general...