Sharpening disc for Model No. SMS2001M Drill Bit Sharpener.

Blade for Model No. DB02 Deburring Tool.

Sharpening blade for Model No. SMS2002C Chainsaw Blade Sharpener.

Punch set for Model No. SNA9821.

Die for Model No. SNA9821.

Fast, effective and efficient way of deburring holes, slots and edges. Features aluminium body with pocket-clip and rotating replaceable cutting blade for use on steel, copper, brass and plastic.

Combination silicone carbide sharpening stone with fine and medium grades. Supplied in a plastic box with pre-cut holes in the base which can be secured and hold the stone when in use, allowing for safe and easy use.

Sharpening wheel for Model No. SMS2004 Multipurpose Sharpener.

Ceramic grinding disc for Model No. SMS2003 Saw Blade Sharpener.

Diamond whetstone supplied in a handy storage case that unfolds to act as a handle. Suitable for the sharpening of knives, scissors, cutting blades, carbon steel, HSS, tungsten and carbide tools. Combination of 400 and 600Grit surfaces. Can be used dry or with water as a lubricant, no oils are necessary.

Composite handgrip with interchangeable swivel cutting bits. Spare cutter stored in handle. Suitable for deburring pipes and sheet materials.

Grinding wheel for Model No. SMS2008 Drill Bit Sharpener.

Useful For Scribing Parallel Lines, Circles and Arcs. Allows any size circle or arch to be made either with a steel rule or length of wood. Fast set up and allows for quick and accurate setting out and marking. Knurled screws Width 3/8"(10mm) to 1-1/4"(32mm). Pencil Holder in one piece to mark your work. Radius Lengths as required with your own made beam.

Fast, simple and effective way to sharpen your drill bits. Suitable for use with HSS Titanium, Cobalt and Carbon Steel ranging from Ø3-10mm. Easily fits to a drill with a 43mm collar (not to be used in hammer function).

Designed to clean internal pipe ends quickly and safely. Manufactured with alloy steel cutters to remove damaged metal and burrs. Features a 1/4"Hex shank for use with a drill or hex driver. Applicable for use on pieces from Ø3mm to 18mm in diameter. Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more.

Diamond coated grinding disc for Model No. SMS2003 Saw Blade Sharpener.

Designed to clean up and repair threaded fasteners and studding quickly and safely. Fitted with 3 x HSS blades to remove damaged metal and burrs. Features a 1/4"Hex shank for use with a drill or hex driver. Applicable for use on pieces from Ø3mm to Ø19mm in diameter. Suitable for use with a variety of compounds including stainless steel, hardened steel, mild steel, copper, brass, plastic and...

Chrome Molybdenum steel blades with forged high carbon steel body. Hardened, tempered and chrome plated for rust resistance.

Hard-wearing rubber anti-slip mat provides fatigue relief and insulation from cold concrete floors. Features four interlocking edges to provide desired area coverage.

Turns an electric or air drill into a versatile nibbler suitable for cutting intricate shapes in various materials. Double end punch allows handle to be removed and re-attached to opposite side for longer periods of use.

Diamond whetstone, for quick and easy sharpening of knives, chisels, scissors, cutting blades and other edged implements. Combination of 400 and 1000 grit surfaces. Whetstone will sharpen carbon steel, high-speed steel (HSS) and tungsten carbide. Can be used wet (with water as a lubricant) or dry. Supplied with an adjustable robust non-slip holder which can be used with stones from 135mm to...

Hard-wearing anti-slip EVA foam matting suitable for use in the workshop and machine room. Provides fatigue relief and insulation from cold concrete floors. Interlocks to make any length in units of 600mm. End section edges to prevent damage.

Hard-wearing lightweight cushioned anti-fatigue matting. Provides insulation from cold concrete floors. Slip resistant patterned surface. Suitable for use in workshops, garages, kitchens, bars and gyms.