Filter
Filter
Popular Products
Subcategory
View Left Column
40 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£4.36Price
Manufactured from polyester webbing. Use to either loop or create a slip knot at any appropriate point of the load and then attach to the hook of the strap. Suitable for use on motorcycles or offset loads to help prevent scratches to paint finishes and chrome.
£4.36Price
£9.53Price
Device designed to stop the over-compression of motorcycle forks whilst in transit. For use on off-road style motorcycles with a minimum front wheel to mudguard clearance of 255mm.
£9.53Price
£12.24Price
Composite 100ml collection bottle with magnetic locating pad. Supplied with non-return valve, tubes and connectors.
£12.24Price
£12.40Price
Optional Bobbin Support for Model No. RPS2 and RPS2KD. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.
£12.40Price
£12.40Price
Designed with jaws and recesses for gripping the split link locking clip. Ergonomic, soft vinyl dipped grip handles. Aids easy removal and installation of the locking clips. Heat treated construction with blackened finish for strength and corrosion resistance. Will remover a majority of motorcycle chain retaining clips.
£12.40Price
£12.40Price
Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.
£12.40Price
£13.12Price
Manufactured from polyester webbing with stitched reinforcement around loops. To be used in conjunction with suitable ratchet tie downs. Suitable for workshop use, to provide safe restraining points for securing motorcycles to a workbench, flat-bed or trailer. Simple cam buckle fastener tensions the webbing to provide superior load restraint.
£13.12Price
£13.36Price
£15.75Price
Accurate tool for correct alignment of the chain and sprocket. Helps prevent wear to the chain and sprockets.
£15.75Price
£16.63Price
Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement. Features moulded rubber handle enabling extra grip.
£16.63Price
£16.71Price
Useful third hand tool for pulling chain ends together while re-linking. Easy-to-use and suitable for most sizes of chain.
£16.71Price
£19.10Price
Handlebar tie down clamp used to minimise possible damage to motorcycle handlebars and grips. Provides a secure fixing point to tie down motorcycle whilst in transit.
£19.10Price
£21.90Price
Manufactured from polyester webbing. Stitched reinforcement at joins and loops. Suitable for workshop use or for securing motorcycle to flat-bed or trailer. Secures rear wheel to anchor point without compressing the suspension units, reducing the risk of seal damage. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism for superior load restraint.
£21.90Price
£22.77Price
Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Clamp screw allows pliers to be fixed into cup of piston for added pulling power.
£22.77Price
Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation with a self-ratcheting system that allows pliers to automatically lock into cup of piston for added pulling power. Serrated pressure blocks for non-slip operation.
£28.68Price
£31.55Price
Essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most front and rear motorcycle brake calipers.
£31.55Price
£27.10Price
Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, gearboxes and differentials. Translucent body allows easy inspection of oils and fluids.
£27.10Price
£31.89Price
Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. Translucent body allows easy inspection of oils and fluids.
£31.89Price
£43.84Price
Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range of pins, dies and detailed instructions. Please view the instructional video on this tool to ensure its correct use.
£43.84Price
Simple, one-person operation using standard workshop air supply (90-120psi). Quick, clean and efficient. Does not require specialised brake reservoir caps. Supplied with two bleed lines for twin caliper systems. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system.
£43.84Price
Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 245-320mm.
£57.01Price
Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm.
£51.82Price
£51.82Price
Allows easy removal and cleaning of front wheel. Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. Design ensures rim and tyre protection at all times. Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (Model No. RPS2KD). Delivered in knock-down form to reduce freight costs, some...
£51.82Price
Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links. Set is also ideal for use on horticultural and agricultural machinery. Includes tools designed for riveting and a plate holder for connecting links accurately. Suitable for use on 520, 525, 530 and 532 chains.
£55.49Price
£65.07Price
Quickly and safely lifts and stabilises front or back of motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel maintenance and removal of front or rear wheel. Unit Capacity of 200kg.
£65.07Price
£55.83Price
Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, gearboxes and differentials. Translucent body allows easy inspection of contents.
£55.83Price
£66.98Price
Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings). Fully adjustable to fit wheels Ø15"-21"(380-535mm). Minimum/Maximum Tyre Width: 50-130mm. Please note: Motorcycle must also be...
£66.98Price
£71.77Price
Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range of pins, dies and detailed instructions. Chain link pulling tool is a useful third hand tool for pulling chain ends together while re-linking.
£71.77Price
£76.56Price
Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to...
£76.56Price
£76.56Price
Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Features detachable slide hammer for impact removal. The kit includes 12 adaptors to suit different sized pistons.
£76.56Price