Filter
Filter
Popular Products
Subcategory
View Left Column
54 products
Grid
Grid-2
List
List-2
Catelog
14/16mm Double end, traditional style, long reach spark plug box spanner with L-bar.
£3.91Price
18/21mm Double end, traditional style, long reach spark plug box spanner with L-bar.
£4.34Price
16/18mm Double end, traditional style, long reach spark plug box spanner with L-bar.
£4.79Price
17/21mm Double end, traditional style, long reach spark plug box spanner with L-bar.
£5.67Price
£5.79Price
Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.
£5.79Price
£5.79Price
Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.
£5.79Price
£6.97Price
One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small non-return valve and two connector hoses that attach to the scooter or motorcycle bleed nipple. As the brake/clutch is bled the valve prevents the used fluid and air being drawn back into the system.
£6.97Price
£8.73Price
One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. As the brake/clutch is bled, the valve prevents the used fluid and air being drawn back into the system.
£8.73Price
£8.57Price
Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20mm lock nuts.
£8.57Price
£8.57Price
Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 24mm lock nuts.
£8.57Price
Double end, traditional style, long reach spark plug box spanners with L-bar. Supplied in a pouch for safe storage.
£6.97Price
£7.95Price
Suitable for removing and installing oil filters with diameters ranging from Ø60-84mm. 25mm Wide spring steel band with corrosion resistant coating. PVC dipped multi-position handle can be applied at 180° to the filter. Automatically tightens as pressure is applied.
£7.95Price
£9.61Price
Dual entry carburettor accessory kit for Model No. MS029. Enables MS029 to be fitted to a motorcycle with dual fuel inlets eliminating need to balance fuel tank in an awkward position. Includes 100mm hose, two 200mm hoses, four hose clamps and Y-piece adaptor. Suitable for E10 petrol.
£9.61Price
£9.53Price
Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet safe and out of the way when not in use.
£9.53Price
£9.61Price
Multipurpose syringe with synthetic rubber seal, ideal for the transfer of oils/fluids to and from vehicle components. Compact size and flexible extension tube makes it ideal for use on motorcycles. Translucent body allows easy inspection of contents.
£9.61Price
£8.73Price
Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables.
£8.73Price
£12.40Price
Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20 or 24mm lock nuts.
£12.40Price
£14.32Price
Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. Maximum Capacity: Ø1.5mm.
£14.32Price
£10.49Price
Heavy-duty polypropylene construction, ideal for draining oils and antifreeze. Sloped design to easily tip contents out of pan. Thin contoured design to prevent accidental movement while in use.
£10.49Price
£10.96Price
Quality construction with sprung steel wrap and friction action tension mechanism. Ideal for small engine pistons. Supplied with steel key.
£10.96Price
£12.40Price
Designed with jaws and recesses for gripping the split link locking clip. Ergonomic, soft vinyl dipped grip handles. Aids easy removal and installation of the locking clips. Heat treated construction with blackened finish for strength and corrosion resistance. Will remover a majority of motorcycle chain retaining clips.
£12.40Price
£16.23Price
Combination hook-end C-Spanner for use with headstock adjustment and rear suspension adjustment. Suitable for a variety of motorcycles. Small End; 36-42mm, Large End; 45-50mm.
£16.23Price
£23.89Price
Compact multi-tool ideal for cyclists and motorcyclists. Eight Total Drive® sockets that fit 28 different sizes of fasteners including Metric, Imperial, Whitworth, TRX-Star* and Spline. Includes 12 1/4"Hex bits and magnetic extension bar/bit holder. Will fit into a pocket, luggage or even under the seat of many motorcycles.
£23.89Price
£13.36Price
Precision machined carburettor jet cleaning and sizing kit. 20 Sizes ranging from 0.45-1.5mm. For classic cars and larger jetted motorcycles. Folding design makes it easy for storage and small enough to carry. May also be used to clean gas jets on welding torches.
£13.36Price
£13.57Price
Aids fast installation of threaded studs without risk of damage to thread. Ideal for engine and exhaust studs. Operate using a 19mm spanner and a 5.5mm hex key.
£13.57Price
£16.63Price
Chrome polished carbon steel construction with 3/8" and 1/2"Sq drive. Also suitable for use with a 21mm spanner. Claws grip filter tighter as more torque is applied. Fits a range of popular motorcycle can filters ranging from Ø43 to 102mm.
£16.63Price
£18.15Price
Used to prevent piston ring damage while inserting pistons into the cylinder head. Easily removed when cylinder is in place. Tool supplied with four ring clamps ranging from Ø40-85mm. Will fit most engine sizes.
£18.15Price
£20.14Price
Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into the combustion chamber, then expanded to the correct size starting on the inner, undamaged threads. Traditional thread restorers rely on luck for the restored and undamaged threads to align. The first letter(s) of a Denso, NGK and Bosch plug code is...
£20.14Price
£19.10Price
Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet and jacket safe and out of the way when not in use.
£19.10Price
£19.10Price
Hydraulic cable oiler, forces oil between inner and outer cables throughout their entire length leaving them silky smooth. For use on brake, throttle, speedo and choke cables for motorcycle, car, bicycle and lawnmowers that require regular oiling as part of their servicing. Easy-to-use and cleaner to service the most popular size cables up to 8mm. Avoids replacing cables that are worn or...
£19.10Price