Device designed to stop the over-compression of motorcycle forks whilst in transit. For use on off-road style motorcycles with a minimum front wheel to mudguard clearance of 255mm.

Optional Bobbin Support for Model No. RPS2 and RPS2KD. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.

Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.

Ideal for protection, rain or shine, against weathering and fading. Double layer cover for extra protection. Inner layer is made from soft anti-scratch material to protect motorcycle's paintwork. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power...

All steel construction with bolted height adjustment. Ideal for long term motorcycle storage. Sold in pairs.

Ideal for protection, rain or shine, against weathering and fading. Double layer cover for extra protection. Inner layer is made from soft anti-scratch material to protect motorcycle's paintwork. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power...

Ideal for protection, rain or shine, against weathering and fading. Double layer cover for extra protection. Inner layer is made from soft anti-scratch material to protect motorcycle's paintwork. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power...

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 245-320mm.

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm.

Allows easy removal and cleaning of front wheel. Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. Design ensures rim and tyre protection at all times. Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (Model No. RPS2KD). Delivered in knock-down form to reduce freight costs, some...

Heavy-duty cover is ideal for protecting a motorcycle when being transported on a trailer. Waterproof double-stitched and heat sealed seams ensure the motorcycle stays dry. Easy-to-use buckle system secures the cover to the bike in all weathers. Air vents provide airflow while being transported and ventilation while being stored. Elastic hem ensures a tight fit to the motorcycle. Supplied in a...

Quickly and safely lifts and stabilises front or back of motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel maintenance and removal of front or rear wheel. Unit Capacity of 200kg.

Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings). Fully adjustable to fit wheels Ø15"-21"(380-535mm). Minimum/Maximum Tyre Width: 50-130mm. Please note: Motorcycle must also be...

Heavy-duty cover is ideal for protecting a motorcycle when being transported on a trailer. Waterproof double-stitched and heat sealed seams ensure the motorcycle stays dry. Easy-to-use buckle system secures the cover to the bike in all weathers. Air vents provide airflow while being transported and ventilation while being stored. Elastic hem ensures a tight fit to the motorcycle. Supplied in a...

Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to...

Ideal for protection, rain or shine, against weathering and fading. For smaller motorcycle derived trikes such as Virago or Shadow models or newer reverse trikes with two front wheels. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply....

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for the larger motorbike derived trikes such as Goldwing or Harley Davidson Triglide types. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic...

Greatly increases stability of the motorcycle by clamping the bottom and front of the tyre, enabling easier securing of the motorcycle to the lift. Suitable for most motorcycle lifts. Some modification may be required.

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of rear wheel. For full floating movement use in conjunction with FPS1MD.

An integral, quiet running fan will quickly and conveniently dry and cool your helmet whilst in the bag. Inhibiting the build-up of damp and odour. Helps prevent the build-up of bacteria, so your helmet smells fresher. Improves the life span of the linings and impact materials in your helmet. The unit is supplied with a USB adapter for connection to your vehicle or to a power pack. Making it...

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of front wheel. Please note: All front paddock stands need to be used in conjunction with a...

Ideal for protection, rain or shine, against weathering and fading. This cover is designed for all VW Flat-four engine based trikes such as Rewaco, Boom and WK models. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery charging while cover is fitted to the motorcycle without the need for mains power supply. Elastic corners with...

This motorcycle moving dolly can be used to manoeuvre motorcycles (maximum 300kg dispersed vehicle weight) with centre-stands and is perfect for places where space is restricted. The centre-stand locates on the 4mm thick hardened steel-plate and the 360 degree castors allow the bike to be moved in any direction. Features a foot/hand operated built-in brake mechanism which is ideal for workshop,...

Ideal for protection, rain or shine, against weathering and fading. Designed for use on new generation Rewaco RF1, ST, GT, LT and Touring models and Boom Lowrider, Grizzly and Mustang models including Family and Extreme variants. Also suitable for larger custom-built trikes. Has a clear PVC pocket to accept Model No. SPP01 Solar Panel (requires Model No. SPP01.A Adaptor) to enable battery...

Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 500kg with weight being dispersed between front and back wheels. Easy to manoeuvre around the workshop or garage. Front wheel stays in contact with the ground allowing the motorcycle to be steered into the desired position. Pivoting feature allows flexibility in side stand designs. Side stand holder can be adjusted to...