One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small non-return valve and two connector hoses that attach to the scooter or motorcycle bleed nipple. As the brake/clutch is bled the valve prevents the used fluid and air being drawn back into the system.

One-person bleeding/servicing of hydraulic brakes and clutches. The kit utilises a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. As the brake/clutch is bled, the valve prevents the used fluid and air being drawn back into the system.

Dual entry carburettor accessory kit for Model No. MS029. Enables MS029 to be fitted to a motorcycle with dual fuel inlets eliminating need to balance fuel tank in an awkward position. Includes 100mm hose, two 200mm hoses, four hose clamps and Y-piece adaptor. Suitable for E10 petrol.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet safe and out of the way when not in use.

Multipurpose syringe with synthetic rubber seal, ideal for the transfer of oils/fluids to and from vehicle components. Compact size and flexible extension tube makes it ideal for use on motorcycles. Translucent body allows easy inspection of contents.

Twin-clamp cable oiler for use with spray type silicone or oil on motorcycle cables.

Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. Maximum Capacity: Ø1.5mm.

Designed with jaws and recesses for gripping the split link locking clip. Ergonomic, soft vinyl dipped grip handles. Aids easy removal and installation of the locking clips. Heat treated construction with blackened finish for strength and corrosion resistance. Will remover a majority of motorcycle chain retaining clips.

Composite angled chain brush. Suitable for use on all chain types.

Combination hook-end C-Spanner for use with headstock adjustment and rear suspension adjustment. Suitable for a variety of motorcycles. Small End; 36-42mm, Large End; 45-50mm.

Compact multi-tool ideal for cyclists and motorcyclists. Eight Total Drive® sockets that fit 28 different sizes of fasteners including Metric, Imperial, Whitworth, TRX-Star* and Spline. Includes 12 1/4"Hex bits and magnetic extension bar/bit holder. Will fit into a pocket, luggage or even under the seat of many motorcycles.

Accurate tool for correct alignment of the chain and sprocket. Helps prevent wear to the chain and sprockets.

Useful third hand tool for pulling chain ends together while re-linking. Easy-to-use and suitable for most sizes of chain.

Wall and door mountable helmet hook suitable for all motorcycle helmets. Designed in order to keep your helmet and jacket safe and out of the way when not in use.

Hydraulic cable oiler, forces oil between inner and outer cables throughout their entire length leaving them silky smooth. For use on brake, throttle, speedo and choke cables for motorcycle, car, bicycle and lawnmowers that require regular oiling as part of their servicing. Easy-to-use and cleaner to service the most popular size cables up to 8mm. Avoids replacing cables that are worn or...

Small compact kit comprises a selection of essential sockets and bits for use on motorcycles. Contains socket/bit holder, 3/8"Sq drive sockets and 1/4"Hex JIS, slotted, hex and TRX-Star* bits. Supplied in compact storage case, ideal for stowing under a motorcycle seat.

Holds and stores your boots whilst cleaning and drying. Reduces the risk of getting water in them during cleaning. Convenient centre handle for stability and carrying.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 15kg and hanging rack capacity of 10kg.

Small compact kit comprises a selection of essential maintenance tools. Tools feature soft grip handles for comfort and control and are supplied in zip storage case, ideal for storing in a vehicle glove box, under a motorcycle seat, or at home in the drawer.

Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as brake master cylinders, oil filter housings, power steering reservoirs, gearboxes and differentials. Translucent body allows easy inspection of oils and fluids.

Must have item when needing to remove fuel tank to perform motorcycle maintenance. Eliminates the need to balance fuel tank in an awkward position. Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. Features 1L tank, 1500mm hose, two hose clamps, two hose clips and on/off tap. For dual entry carburettor systems, use the Model...

3-Jaw design applies even pressure preventing damage to bearings. Designed to remove bearings with Ø12-38mm internal diameter. Forged and heat treated steel jaws for greater strength. Corrosion resistant black oxide finish.

Multipurpose syringe with Viton® seal, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. Translucent body allows easy inspection of oils and fluids.

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and helmet(s). Shelf capacity of 18kg and hanging rack capacity of 10kg.

Breaks and rejoins most types of chain quickly and easily. Suitable for most sizes of drive or cam chain from #25 to #520. Supplied with a range of pins, dies and detailed instructions. Please view the instructional video on this tool to ensure its correct use.