10mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø12mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø15mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø17mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Moulded protectors with connecting cord, designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres with tyre levers.

Ø20mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Ø19mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Quality drop-forged and tempered steel with flat rounded tip. Moulded handle enables extra grip. Suitable for use with motorcycle, small agricultural or leisure tyres.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

Ø25mm Replacement Collet for MS062 - 9pc Wheel Bearing Removal Kit.

Professional seal driver sleeve for Ø47-48mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø45-46mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø42-43mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional seal driver sleeve for Ø40-41mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

1/2"Sq Drive H24 53mm long socket can be used for removing the front and rear wheels on modern motorbikes with internal hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

Combination fork cap spanner suitable for use on Kayaba, Showa and twin camber forks.

Combination hook-end C-Spanner for use with headstock adjustment and rear suspension adjustment. Suitable for a variety of motorcycles. Small End; 36-42mm, Large End; 45-50mm.

Specially designed spoke wrench with eight interchangeable sized heads. Suitable for adjusting spoke tension and correcting buckled wheels.

Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends. Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres.

Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish. Specially designed for use with slotted retaining rings. Hook and pin interchangeable hinged arms.

Prevents spindle from spinning when tightening or loosening wheel nut. Use appropriate socket on free end of tool to hold spindle. Six sizes to fit a variety of motorcycle makes and models.

Professional seal driver shell works with a range of Sealey Fork Seal Driver Sleeves. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Ergonomically designed driver body requires less power and aids accurate operation. Compatible with Model No's MS0531, MS0551, MS0561, MS0581, MS0591 Fork Seal Driver Sleeves.

Specially designed pliers with angled jaws and machined recesses for gripping the split link locking clips. Ergonomic, soft grip handles for comfort and additional grip. Aids the easy removal and installation of the locking clips fitted to common split links used to join the drive chains on many motorcycles.

Compact design incorporating integral storage for air output hose. Features a worklight and pressure gauge which reads up to 5.5bar (80psi). Powered by a 12V motor suitable for inflating tyres on motorcycles and cars. Supplied with vehicle accessory socket plug and battery clips.

CO2 Tyre inflator kit including adaptor for Schrader type valves (used by most cars and motorcycles and some bicycles). Includes 2 x 16g canisters of CO2. Supplied in zipped storage pouch.

Quality Chrome Vanadium steel tyre lever with hard plastic moulding hook and taper ends. Designed to reduce the risk of damage to motorcycle wheel rims when removing or fitting tyres.