Cast iron ductile body with steel force screw and tommy bar. Suitable for four and five stud hubs. Use with a 1/2"Sq drive ratchet wrench or with tommy bar supplied.

Drop-forged, carbon steel reversible legs and body. Heat treated and chrome plated to resist corrosion. Hex head forcing screws suitable for use with a ratchet or spanner.

Soft-faced vinyl material prevents scratching and marking of paintwork during servicing. Wing cover held in place by integral magnets.

DVSA Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.

Forged and heat treated Chrome Vanadium steel impact grade socket, chemically blackened for corrosion resistance. Malleable steel makes the socket suitable for use with either hand ratchet wrenches or air impact wrenches.

Heavy-duty twin leg bar type puller, suitable for easy removal of pulleys, flywheels, bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Zinc plated for corrosion resistance. Thrust bearing prevents wear and damage to shaft.

Induction adaptor for Model No's. VS230 and VS250 Induction Heaters.

Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing...

Detects and confirms radio frequency and/or infrared emission from key fobs and remote controls. Helps diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle. Magnetic backing sticks to the side of any ferrous surface for testing the range of the transmitter. Suitable for a wide variety of vehicle manufacturers.

Set of three different size spanners for removing and refitting fuel tank sender mounting rings. Includes 2-leg and 3-leg configurations ranging from Ø85mm to Ø170mm.

Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines. Note: Not suitable for vehicles with deep-seated valves.

Stainless steel caliper suitable for accurate measurement of brake disc thickness. Floating jaw assembly enables easy removal of caliper from disc while retaining reading. Metric scale with 0.1mm graduations. Supplied in storage case.

Composite body and dial type jumbo gauge with rubber protector. Displays in bar and psi. Fitted with 400mm rubber hose and twin push-on connector.

Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.

Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.

For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.

Chrome Molybdenum, drop-forged, 8-stud impact socket, designed for grooved locknut fitted to Scania (420) axle systems.

Die-cast body and digital type gauge with rubber protector. Displayed in psi, bar, kpa and kg/cm². Fitted with 500mm rubber hose and single clip-on connector. Supplied with 2 x AAA batteries.

Emergency kit includes 12V compressor, 450ml sealant bottle, accessories for inflatables, instructions and zipped storage bag fitted with hook-and-loop fastening for smart storage. Can seal a puncture up to Ø6mm at the roadside in under 10 minutes. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Very simple-to-use kit requires...

Specially designed jaws give excellent grip onto a wide range of vehicle hose clips. 440mm Double-jointed feature gives a long reach, allowing easy-access into places such as bottom radiator hoses. Clever spring loaded locking function allows use one-handed. 75mm Jaw capacity. 35° Angled head version available for access into difficult tighter areas in the engine bay, Model No. VS1677.

Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case.

Manufactured from Chrome Vanadium Steel for added corrosion resistance. Single Hex 6pt 120mm long sockets. Extra-deep socket set which is useful for deep-seated bumper, body panel, rear lamp and door hinge fittings. Can also be used for parking brake cable adjustment on BMW, Ford, VAG and Vauxhall/Opel. Sizes: 8, 10, 12, 13, 14mm.

High precision multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Double moulded housing with soft grip case and large display for ease of use. Probe and lead storage. Integral upright stand for use on the workbench. Supplied in zipped pouch with carry strap. Measures: • AC and DC Voltage • DC Current •...

Compression tester fitted with Ø63mm gauge reading up to 300psi(20kg/cm²). Kit includes 130mm straight and angled push-on connectors, 300mm flexible extension with 10, 12, 14, 18mm adaptors. Supplied in storage case.