Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 and Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work.

Heavy-duty 4-point specialised impact socket for removing the rear hub nut on RWD Ford Transit vehicles. Alignment shaft allows accurate location onto castellated nut.

Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with 4-Wheel Laser Aligners such as Model No. GA70. Self-retaining and centring using a spring loaded mechanism. Features a level bubble to show horizontal position. Suitable for steering wheels with an internal diameter of between Ø270mm and Ø340mm.

Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach. Ball-end tips fit inside bearing races to provide traction for bearing extraction. Chrome Vanadium steel components. Ideal for a wide variety of bearing sizes. Supplied in storage case.

Heavy-duty, high quality, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool. Blackened finish for added corrosion resistance. Tool suitable for hub nut applications where high torque is required. Supplied in a storage case.

Calibrated and DVSA approved for use when testing all classes of vehicle. Hardened and tempered stainless steel gauge. Metric and Imperial calibration with conversion between the two. Zero reset control allows for comparative measurement. Includes flat surface plate for accurate zeroing of gauge prior to use. Supplied in storage case.

Save time and money and take the guesswork out of your fault-finding and diagnosis. Allows interrogation of the vehicle’s ECU to determine the performance of essential emission-based information, to read and clear Diagnostic Trouble Codes (DTCs) and to obtain vital performance data from the vehicle’s engine and transmission (Petrol 2000 onwards and Diesel 2003 onwards).

Sockets manufactured from Chrome Vanadium steel. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with a 3/8"Sq drive ratchet or T-bar (not included).

Professional one-person brake and clutch bleeder that uses air from the vehicle tyre. Reservoir holds 1.5L of hydraulic fluid - flush the entire system with one fill without the risk of running the reservoir dry. Maximum pressure of 30psi makes the unit suitable for ABS systems. Features a fluid shut-off valve to prevent accidental spillage and air pressure release valve. Fitted with Ø45mm cap...

Multipurpose syringe with Viton® seals, ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials. Translucent body allows easy inspection of contents. Dual feature allows fluid to be extracted on pull stroke and expelled on push stroke, for fluent transfer of fluid.

Chrome Molybdenum, drop-forged, 6-point, high-impact socket designed for the removal of Iveco Eurocargo axle nut.

Designed for both petrol and diesel vehicles, to retrieve excess fuel from fuel lines before maintenance. Eliminates the risk of fuel spills and damage to pipes if clamped. Supplied with quick release connectors, commonly found on PSA and Vauxhall/Opel vehicles, plus two universal connectors for older vehicles.

Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.

Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds. May be used with feeler gauges for high precision work. Made from Carbon Steel. Features peg hole for easy storage. Supplied with protective edging for when not in use.

High precision auto-ranging multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Features temperature measurement capability, max./data hold and auto-power-off function. Double moulded housing with soft grip case and large display for ease of use. Practical probe, lead storage and integral upright stand for use...

American-style drop tester. Polarity protected cables - impossible to damage unit by incorrect connection. Load applied by internal switchgear - no sparking! Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.

Composite cased Xenon timing light with inductive impulse pick-up. 8000rpm Maximum. Measures timing advance range 0-60° BTDC. Supplied with 1.5m coiled 12V power lead, inductive coupler and operating instructions.

Compact digital tyre inflator with output of 12L/min. Pressure gauge reads up to 120psi (kPa, kg/cm² and bar equivalents). 140mm Extension tube with Schrader connection. Micro USB rechargeable (cable supplied). USB output for charging mobile phone etc. (5V/2A). Supplied with sports ball pin adaptor, balloon/inflatables adaptor and also a Presta valve adaptor for road bicycle tyres. Built-in 1W...

Bumping mallet manufactured with a rubber filler which has an elastic feel but is hard when in use. Hex head shape that can distribute force evenly. Ergonomic soft grip handle which prevents hand fatigue. Non-marring rubber that avoids scratching, so ideal for door weatherstrips, upholstery, trim, panels and bumpers. Mallet length 260mm.

Suitable for timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9D CDTi/TiD/TTiD or 2.0D CDTi engines. Kit contains camshaft setting tools, crankshaft locking tool and tensioner pin. Supplied in storage case.

Suitable for VAG 1.2 6v, 1.2 12v, 1.4 and 1.6 16v twin cam petrol engines (97-14).

Ensures accurate measurement of belt tension. Clear increment and dual scale for ease of use. Tension chart guide is included. Suitable for belts of varying thickness.

Chrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. Each 6-point socket is sleeved and has an insert to prevent damage to alloy wheels and nuts. Colour-coded socket assists ease of size selection. Comprises deep or long reach 17, 19 and 21mm sockets. Supplied in storage case.