The approved method of testing the water content of brake fluid. Just 3% of moisture can lower the brake fluid boiling point by over 100°C. The best way to detect this small water content is to measure the boiling point of the fluid. The unit incorporates a heater element, LCD display and a power lead for use on 12V DC power supplies. Works on DOT 3, 4, 5 and 5.1 specification fluids. Supplied...

Suitable for a wide range of commercial vehicles. Screw action provides fast adjustment to suit hub diameter. Four interchangeable spigot adaptors aid close alignment.

Essential tool for DSG clutch removal and installation used on VAG 6/7-speed gearboxes. Kit includes clutch support device, puller, gauge block, thrust piece and assembly lever. Supplied in storage case.

Produces accurate automotive double flares on most common sizes of brake pipe. Cam-action body mounts in bench vice for ease of use. Includes dies and clamp blocks for forming most popular flares. Optional 3/8" clamp block available. Supplied in storage case.

Brake and clutch reservoir bleed caps (2001-2022). Aluminium made adaptor suitable for pressure bleeding works that require 1-2 bars/14-30 psi pressure range. Heavy-duty adaptor set covers most vehicles. Compatible with Sealey brake bleeders VS0204, VS0204A, VS0207, VS820, VS821.

High quality die-cast aluminium tool. Suitable for pre-tensioning clutch plate combination prior to re-assembly.

Produces accurate automotive SAE and DIN flares on 3/16" and 4.75mm pipes respectively. Small body makes it ideal for splicing in replacement sections of brake pipe. Features a hydraulic ram which also makes it suitable for steel pipes. Supplied in storage case.

Manually operated oil dispensing unit manufactured from composite materials. Large visual measurement will identify amount dispensed. Supplied with a range of five automatic transmission fluid adaptors. Delivers approximately 70ml per stroke. Features a fluid control valve and adaptor storage to minimize oil leakage when not in use.

Locate problems relating to commercial vehicle air brake pressure quickly and easily. Three gauges provide more accurate diagnosis when testing and locating faults along the braking system. Suitable for use at the roadside or in the workshop. Features three large 0-20bar(0-300psi) gauges with rubber bumper. Includes male/female couplings, three hoses and a wire brush. Supplied in storage case.

One-person pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Features a long delivery hose for operation with a low...

Necessary for pre-tensioning self-adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool, allowing the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors. Supplied in storage case.

Produces accurate automotive SAE and DIN flares on 3/16", 4.75mm, 5mm and 6mm brake pipes. Ideal for splicing in replacement sections of brake pipe. Powerful, lever operated hydraulic ram makes it suitable for steel pipes. Features quick release chuck, twist lock die block housing for fast assembly and rotating hydraulic pipework to give easy-access in confined spaces.

One-person pressure brake and clutch bleeding system suitable for the professional workshop. Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable. Large reservoir means reduced risk of running the system dry during bleeding process or complete fluid change. Suitable for use on ABS systems. Features a long delivery hose for operation with a low...

Powered by the vehicle’s own 12V battery. Allows single-handed bleeding of the vehicle’s brake or clutch system and unit is fitted with a long, high pressure hose. Bleed pressure is closely controlled up to 2.5bar - suitable for most vehicles (even those with ABS). Unit fitted with auto-shut-off device to prevent the system running dry and is supplied with a variety of European, Japanese and US...

Commercial 14 Tonne brake disc press set for the removal of seized brake discs from hub assemblies. Low-profile rams sit between the disc and hub with two independent regulator valves providing safe controlled detachment. Applications: DAF, Renault and Volvo commercial vehicles. Use in conjunction with RE83/840/CWH hydraulic air pump or RE97.10-01 hydraulic manual pump ( not included).