Automotive fuel line and air conditioning hose disconnection set. Suitable for a wide variety of vehicles with quick disconnect couplings. Compatible with low profile fuel lines on a range of Ford, Vauxhall/Opel, Mazda and Chrysler. Designed for automotive fuel, A/C and transmission cooler lines. Made from a tough durable plastic that's resistant to fuel and solvents. Offset handles are ideal...

Thread inserts for Model No. TRM5.

Imperial graduated 12 blade feeler gauge. Dual marked in Imperial and Metric. Offset tips are essential for checking tolerances on OHC configurations and suitable for other applications where straight blades will not fit. Sizes 0.008" to 0.026"(0.203 to 0.660mm). Blade dimensions 95 x 13mm (45º-25mm offset).

Ø120mm Rubber suction grip prevents damage to surface. Designed for handling glass, tiles, plastic, sheet metal and other non-porous material. Suction vacuum controlled by locking handle.

Satin finish Chrome Vanadium socket with knurled ring. S2 Steel Hex shaft. Suitable for the removal of brake caliper fasteners. Warning: Not for use with impact type ratchets.

Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength. Composite body and rubber bulb for workshop durability.

Suitable for removing and installing oil filters with diameters ranging from Ø60-84mm. 25mm Wide spring steel band with corrosion resistant coating. PVC dipped multi-position handle can be applied at 180° to the filter. Automatically tightens as pressure is applied.

Crankshaft sensor hex key 80mm long reach. Chrome Vanadium 4mm ball-end hex key. Fits a wide variety of VAG vehicles.

The bonnet strut support clamp is specifically designed to secure the gas strut of the bonnet and prevent potential injuries caused by bonnet strut failure. Securing nut keeps bonnet strut securely clamped in place. The bonnet strut clamp is supplied with an ergonomic plastic handle that is comfortable when operated, avoiding any discomfort or hand fatigue when in use. Max. opening of 10mm fits...

Extended-pin chain and twin-claw body for positive and reliable chain retention. Drop-forged steel body with hanging hole.

Installs and removes piston rings from 1.2mm to 5mm. Vinyl gripped handles with spring-return mechanism.

Used to hold the brake caliper away from the hub when replacing brake pads. Simply hang the caliper hook onto a suitable suspension component to hold the caliper out of the way. Stops the weight of the caliper damaging the brake hose. Supplied with two brake caliper bolt retaining tags.

Chromed steel body with pocket-clip. DVSA Approved depth scale includes 1.6mm graduation for minimum tyre tread requirements. Scale from 0-26mm in 1mm graduations.

1/2"Sq Drive. H22 53mm long socket. Can be used for removing the front and rear wheels on modern motorbikes with internal Hex axle, suitable for maximum loads. Suitable for BMW, Honda, Suzuki, Yamaha, Ducati, Kawasaki and many other makes.

Designed for use where plug clearance is tight. Standard depth, thin wall, 3/8"Sq drive WallDrive® socket.

Designed for use where plug clearance is tight. Standard depth, thin wall, 3/8"Sq drive WallDrive® socket.

Designed for disconnecting fuel lines on BMW engines. Applications: BMW 3 Series 2006-2011 and X3 2006-2009 plus Mini Cooper 2007-2013. Manufactured from aluminium.

TDC timing pin used on a variety of diesel and petrol Renault engines.

Suitable for packing bearings with an even spread of grease. Clean, quick operation simply place bearing on to the bottom cone, screw down the cone lid and pump grease into nipple. Works on most tapered roller bearings fitted on cars, boats, trailers, etc. Both cones feature knurled grips for use with oily fingers. Suitable for use with Sealey and other best-selling grease guns.

Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and repairing damaged threads on the sensor port, prior to new sensor being fitted. Thread Size: M22 x 1.5mm. Use with 22mm socket or spanner.

Suitable for 6-24V DC circuits. Insulated body with test light. Probe tip is covered with protective plastic cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

Set includes camshaft locking tool, designed to fit between camshaft sprockets to retain timing position on 1.4, 1.6 and later 1.8 16v EcoTec engines. Also includes flywheel holding tool (for crankshaft pulley removal) and auxiliary belt tensioner locking pin, which are required during timing belt replacement on these engines.

Suitable for Knorr-Bremse SB, SK and SN brake calipers. Popular applications include Bova, DAF, Foden, MAN, Mercedes-Benz, and Scania. Also used on BPW and SAF trailers. Manufactured from Chrome Vanadium with black phosphate finish.

For safely removing the airbag module from the steering wheel. Suitable for Land Rover Discovery 3-4, Freelander 2 and Range Rover Sport. Land Rover OEM tool 501-106. Also used across the VAG ranges as a trim, door handle, A/C vent, clock removal, fuel tank flap removal/release tool. VAG OEM tool T40207.