Designed to hold the central strut whilst the securing nut is removed. WARNING: Ensure the road spring has been compressed using a suitable spring compressor BEFORE removing top nut. Applications: Volvo C70 Coupe (-02), C70 Convertible (-05), S70, V70 (-00), XC90, V70 (00-08), V70 XC (01-), XC70 (-07), S60, 850, V70 XC (-00), S80 (-06). OEM Tools: 9995469 and 9995468.

Suitable for the removal and installation of top shock retaining nut. Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. Use with 22mm spanner.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.

Ideal for removing and refitting the wheel hub retaining nuts and adjusting the wheel bearing free play. Suitable for Land Rover taper roller bearings. Use with bar through the Ø14mm cross-drilled holes.

Enables user to disconnect electrical connectors quick and easy without causing damage. Double ended design allows access at different angles. Can be used with most car and commercial vehicle electrical connectors.

Professional seal driver sleeve for Ø35-36mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.

Professional battery hydrometer. Tests 6, 12 and 24V batteries. Float gauge and thermometer built-in. Tube construction with thermometer for temperature compensation.

Manufactured from high quality stainless steel with spring-return. Suitable for cutting soft wires and plastic e.g. cable ties. Sturdy handles for added grip and comfort.

Hardened carbon steel tyre lever, with hook and taper ends.

Checks continuity of blade-type automotive fuses, in or out of fuse holder. Green LED indicates fuse is OK. Also simplifies the removal of faulty fuses.

Chrome shaft with chemically blackened tip insert. Suitable for safe removal of oil and grease seals found in automotive drives and transmissions, without damage to seal or surrounding casting. The two tips fit most popular seal sizes.

Suitable for 6-24V DC circuits. Knurled brass body with test light. Probe tip is covered with protective brass screw cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

Suitable for Model No's BT2003, BT2014 and other leading brands of battery tester.

Double ended 18.5/19.5mm, 80mm impact socket 1/2"Sq drive. Designed for easy removal of wheel bolts/nuts with missing or distorted caps. Suitable for Ford, GM, Jeep, Chrysler. Thin-wall design to fit a wide range of applications. Black phosphate finish.

Forged construction with hot forged sockets and baked finish.

Quick and easy-to-use. Ideal for testing ignition coils, fuel injectors and relays. Powered by 2 x AA batteries (not included). Not suitable for piezo energised fuel injectors.

Forged Chrome Vanadium steel tyre lever, with hook and taper ends.

Designed to remove terminals frequently used on many VAG group vehicles.

Pressure gauge with Ø46mm dial, reading up to 100psi(7kg/cm²). Metal body and offset valve connector. Compatible with both cars and light commercial vehicles.

Steel framed foot pump with Ø50 x 120mm steel barrel. Dial type pressure gauge with rotating bezel. Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar. Fitted with 610mm of flexible pressure hose with clip-on type connector. Supplied with accessory for inflating items such as small inflatable boats, air beds and balls.

For use in conjunction with Sealey Hydraulic Ball Joint Installer/Removal Kit (Model No. VSE127H). Set contains various adaptors for front ball joint removal/installation on Renault Laguna (93-00).

Forged construction with polished mirror finish. Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.

Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.

Assists in the diagnosis of airbag units and seat belt pretensioners. Connect in place of an airbag or seat belt pretensioner unit to test for component failure. Contains a two ohm resistor and two probe leads. Always follow manufacturer's instructions when testing SRS systems and components.

Specially designed spoke wrench with eight interchangeable sized heads. Suitable for adjusting spoke tension and correcting buckled wheels.