Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and repairing damaged threads on the sensor port, prior to new sensor being fitted. Thread Size: M22 x 1.5mm. Use with 22mm socket or spanner.

Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and reforming threads on exhaust system fuel vaporiser ports. Short lead-in on thread allows thread to be cut as close as possible to internal seat of the exhaust. Thread Size: M20 x 1.5mm. Use with 21mm socket or spanner.

Cutting wheel for Model No. VS16371.

Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° And 120° hooks to suit block and ring mounts respectively.

Steel construction with dipped vinyl handle. Enables fast removal and installation of rubber anti-vibration mountings found on exhaust systems.

For use in conjunction with Model No. VS7009 Transmission and Engine Oil Filling System. Suitable for automatic transmissions on VW Passat and Tiguan 2007 onwards.

For use in conjunction with Model No. VS7009 Transmission and Engine Oil Filling System. Suitable for automatic transmissions on Toyota/Lexus vehicles.

Nylon components with steel main shaft. Fits 90% of cars and light vans up to 5 Tonne gross (not suitable for vehicles with double plate clutches). Supplied with three different sized expanding collets.

Specially designed pliers with angled jaws and machined recesses for gripping the split link locking clips. Ergonomic, soft grip handles for comfort and additional grip. Aids the easy removal and installation of the locking clips fitted to common split links used to join the drive chains on many motorcycles.

Manufactured from Chrome Molybdenum and specially designed for propshaft bolts on Land Rovers. Slim wall socket design with slim extension enables it to fit perfectly between the yokes of the propshaft. Suitable for most models of Land Rover Defender, Discovery and Range Rover.

Transmission dipstick for checking the fluid level on Mercedes 722.6, 722.7, 722.8 and 716.5 automatic transmissions, fitted to most Mercedes vehicles from 1996 to 2006. The dipstick is a service tool, therefore must be removed after the fluid has been checked. Made from spring steel with plastic measuring tip for accurately checking the fluid level.

Suitable for Jaguar XJR, XJ, XK8, XKR, XF and S-Type using the 6HP26 automatic transmission. Allows the oil filler bung to be accessed where space is limited. Supplied with two adaptor pieces.

Manufactured from hard-wearing polypropylene material. Locates comfortably in wheel and ensures safe and clean collection of waste oil.

Oil filling pipe for VAG DSG transmission that allows simple filling of the gearbox. M24 x 1.5mm male thread with a 1.5m durable plastic hose and an M37.5 x 3mm female thread adaptor which attaches to the oil container. Aluminium connectors that are hardwearing and robust. Knurled edges for superior grip when attaching to the gearbox even with oily hands. OEM Tool: VAS6262A.

For use on VAG vehicles fitted with 7-speed DSG gearboxes. OEM equivalent tool VAS6617/12. Designed to work with Sealey VS7009 gear oil dispensing tool.

Opens exhaust hose clamps quickly and easily. Ideal for Citroen, Peugeot and Renault exhaust clamps. Also suitable for prising open any type of clamp or clip secured with nut and bolt. Comfort grip handles with self-locking mechanism aid working on spring clamps.

For use in conjunction with Model No. VS7009 Transmission and Engine Oil Filling System. Suitable for automatic transmissions on VAG vehicles.

DSG oil filling adaptor for VAG 7-speed and 8-speed transmission. Compatible with 1.2 TFSi, 1.4 TFSi, 1.8 TFSi, 1.5 MPi, 1.6 TDi engines. OEM TOOL ASE40910100000. Also suitable for Porsche 8-speed ZF 8DT transmissions. Use in conjunction with Sealey VS7009 transmission oil filling system.

Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. Use with 17mm spanner.

Enables fast, one-handed removal of exhaust brackets from rubber hangers. Suitable for a wide range of cars and light commercial vehicles.

Chemically blackened steel components in storage case. Aids alignment of clutch plate for assembly.

Suitable for 9G Tronic 725 series gearboxes fitted to Mercedes E350 BlueTEC (2013on) and CLS models (2014on). Contains a socket wrench to adjust oil level and a quick release coupling. Designed for drain and refilling operations.

Drop-forged, carbon steel reversible legs and body. Heat treated and chrome plated to resist corrosion. Hex head forcing screws suitable for use with a ratchet or spanner.

Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing...

Suitable for cutting exhaust pipes and steel or copper tubing up to Ø83mm. Plier design handles allow for even cutting pressure and enables access where space is restricted. 90° Handle movement produces a 360° cut.