Assists in the diagnosis of airbag units and seat belt pretensioners. Connect in place of an airbag or seat belt pretensioner unit to test for component failure. Contains a two ohm resistor and two probe leads. Always follow manufacturer's instructions when testing SRS systems and components.

Yellow plastic connectors are suitable for joining a 6mm chain. For use with Model No's BYC25M Safety Chain and BYSBKIT Post Kit.

It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. This locking tool securely locates in the teeth and fixes to the housing using...

Designed to lock the high pressure fuel pump sprocket to enable the sprocket nut to be removed. Facilitates the removal of the high pressure fuel pump. Equivalent to OEM 0194-J. Use in conjunction with Model No. VSE5846.

Designed to fit between camshaft sprockets to maintain camshaft timing position. Essential tools for timing belt replacement applications. Supplied as a pair.

Red plastic connectors suitable for joining 6mm chain. For use with Model No's HSC25M Safety Chain.

230mm Long, 4-way crimping tool crimps terminals, strips wires, cuts screws and wires. Handles both insulated and non-insulated terminals 1.5, 2.5 and 6mm². Strips wires 0.75, 1, 1.5, 2.5, 4 and 6mm². Screw cutting capacity from M2.6-M5. Safety insulated handle grips. Supplied with approximately 50 assorted terminals and connectors in a handy storage case.

Suitable for testing electrical circuits from 3 to 48V DC. Integral, spring loaded, pointed probe for testing through insulation. Twin LEDs indicate live circuit and polarity. Supplied with 0.9m cable and insulated crocodile earth clamp.

Removes heavy corrosion for improved electrical contact on battery terminals. Unique design makes spreading the battery terminal clamp easy, for quick installation. Ergonomic handle with a comfortable non-slip grip. Fits most battery clamps with min./max. 15-20mm clamp opening.

Pocket wire stripping tool suitable for automotive and electrical trades. Features a spring loaded safety lock.

Red plastic S-hooks suitable for attaching 6mm chain to posts. For use with Model No's HSC25M Safety Chain.

Suitable for Model No. BT2012.V2, BT2015 and other leading brands of battery tester.

Crankshaft pulley holding wrench. Suitable for Vauxhall/Opel 1.6 diesel engines.

Automatic wire stripper and cutter operates in one easy single-handed operation. Stripping capacity 0.2-6mm². Built-in side cutter with maximum cutting capacity: 4mm². Stripping length up to 15mm. Handle lock with automatic wire size adjustment allows you to work quickly and efficiently.

Stainless steel tools for the easy removal of Mercedes radios, ignition locks and dashboard instruments. Also suitable for removal of Vauxhall/Opel headrest. Supplied in a composite storage case.

Suitable for testing 6, 12 and 24V DC circuits. Insulated, pointed probe tests through wire insulation. Supplied with 1.5m cable and crocodile earth clamp.

Tool for a range of Mercedes A - Class vehicles. Suitable for hydraulic tensioners fitted to vehicles with a stop/start function and/or air conditioning. Attempting to compress the tensioner without using this tool may result in damage to the tensioner.

Essential tool required to counter-hold the crankshaft pulley whilst removing/tightening the crankshaft pulley bolt.

Set of locking pins for timing belt replacement on Ford 1.5, PSA 1.4 (DV4) and 1.6 (DV6) diesel engines fitted in Citroen, Peugeot, Ford, Mazda, Suzuki, Toyota and Volvo models. These timing pins lock and hold the camshaft, crankshaft, flywheel and HP pump in the timed position.

Set comprises flywheel locking pin (threaded) and camshaft locking pin to cover engine timing on the Land Rover TD5 engines in Defender and Discovery models. Supplied in a storage foam with instructions and a warning tag.

Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear.

LED Indicators verify condition of battery and alternator. Suitable for 12V DC systems. Magnetic backing sticks to metal surfaces for hands-free operation. Fitted with 900mm cable, probe and crocodile clips.

Designed for professional installers and vehicle technicians. Capable of overcoming most day-to-day cable installation problems, particularly in domestic and commercial buildings. Ideal for installing wires through vehicle bodywork. Includes a hook and flexible joint with eye and 320mm screw-in polyester rods (x10) with a total length of 3.2m. Supplied in storage tube.

Set allows single or multiple testing. Simply fit tester between spark plug and HT lead and then run engine. Regular flashing of the testers indicates a good HT supply. Not suitable for engines with deeply recessed plugs.

Suitable for 6, 12, 24 and 48V DC circuits. LED array indicates polarity and voltage range. Supplied with 850mm cable and crocodile earth clamp.