Manufactured from heat resistant nylon. Rounded jaw edges prevent damage to internal hose reinforcement. Features locking mechanism for simple one-handed use. Suitable for brake, coolant, fuel and vacuum hoses.

Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. No electricity or compressor required, ideal for use on a vehicle lift. Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Fast, simple-to-use and features on/off flow valve.

Compact design for bending automotive brake pipes without crushing the pipe walls. Rigid construction makes it suitable for steel pipes. Will bend Ø3mm (1/8"), Ø4.75mm (3/16") and Ø6mm (1/4") pipe up to 90°.

Ingenious time-saving tool and essential for any garage. Measures the brake pad lining on the vehicle without removing the road wheel. Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc. Suitable for both internal and external brake pads. Features calibration line, plus...

Unique lever action floating jaw assembly enables easy removal of caliper from disc while retaining reading. Ideal on discs that have a wear lip. Features a tyre tread depth gauge at the base of the caliper and scale lock. Metric scale with 0.1mm graduations.

Spring loaded pliers, for fitting and removing hoses fitted with constant pressure type hose clips. Designed to be used front or side facing, making the tool fast and effective to use. Slots in 16mm jaws, locate and secure hose clip ends into position. Can also be used as a traditional set of pliers.

Chrome Vanadium steel 1/2"Sq drive sockets. Includes pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.

3/8" Clamp Block for PFT07.

Kit consists of adaptors with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons. Helps prevent damage to pistons and seals.

Extra-large 175cc bulb for fast fluid transfer. One-way ball valve draws fluid up, starting syphon process for continuous flow. Fitted with two Ø14mm hose connection points. Ideal for transferring large volumes of fluids. Suitable to use with petrol/diesel, AdBlue®, low viscosity oils, antifreeze, screenwash and water.

Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. Use with 17mm spanner.

Twin handles provide even force for accurate pipe forming. Slender design allows pipes to be shaped in situ. Ideal for aluminium, brass, copper and steel pipe. Contoured vinyl grip handles provide extra comfort and control.

Suitable for most automotive applications. Bends pipe without crushing walls. Will bend Ø6, Ø8, Ø10mm (Ø1/4", Ø5/16", Ø3/8") pipe up to 180°.

Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.

Enables fast, one-handed removal of exhaust brackets from rubber hangers. Suitable for a wide range of cars and light commercial vehicles.

Chemically blackened steel spreader plates. An essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most ATE, Bendix, Delco and Girling calipers.

Patented design ensures that the spring mechanism maintains the correct cutting pressure on the pipe at all times. Features a smooth screw action and nickel-plated blade for increased cutting performance.

Fast and easy bleeding of brakes including ABS systems and clutch using air from the tyre. Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. Adaptors included; Ø25mm Cap and Seal for Lockheed Systems, Ø27mm Cap and Seal for VAG, Ø44/45mm Cap and 2 Seals (Ø44mm thin/Ø45mm...

Vice mounted brake pipe shaping tool, designed for use on automotive applications. Dual stepped sections allow pairing of pipes for correct curvature for uniformed alignment to vehicle. Suitable for 3/16”(4.76mm) cupro-nickel, copper and steel pipe.

Enables retraction of the piston on rear brake calipers. Helps prevent damage to pistons and seals. Special low profile design for VAG vehicles.

Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. Spring loaded, offset jaws enable easy-access to spring washer located behind wheel hubs. Suitable for cars and light commercial vehicles.

Electrolytic tester. Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits. Easy calibration check using water. Three LED read-out. Just switch on and insert probe for immediate result. Red LED warns when battery is low and needs replacing. Powered by 1 x AAA battery (supplied).

Universal reservoir cap for Model No's VS820, VS821 and VS0204A Brake & Clutch Bleeding Systems. Supplied with quick connect.

Ø45mm Brake and clutch reservoir bleed cap (2001-2022). 90° Connector with hose for use where access is restricted. Manufactured from aluminium, this adaptor is suitable for pressure bleeding work that requires 1-2bar/14-30psi pressure range. Heavy-duty adaptor covers most vehicles. Compatible with SEALEY brake bleeders VS0204, VS0204A, VS0207, VS820, VS821 and VS0308B.

Collection bottle with wide base for added stability. Features a one-way valve to reduce air re-entering the system, clear hose to evaluate the condition of the fluid and presence of air, vent located in the lid and drain cap for simple emptying of old brake fluid. Includes two hanging hooks.