Long reach Chrome Vanadium Hex wrench with comfortable handle sleeve for extra leverage. Suitable for the removal of brake caliper fasteners.

Satin finish Chrome Vanadium socket with knurled ring. S2 Steel Hex shaft. Suitable for the removal of brake caliper fasteners. Warning: Not for use with impact type ratchets.

Used to hold the brake caliper away from the hub when replacing brake pads. Simply hang the caliper hook onto a suitable suspension component to hold the caliper out of the way. Stops the weight of the caliper damaging the brake hose. Supplied with two brake caliper bolt retaining tags.

Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and repairing damaged threads on the sensor port, prior to new sensor being fitted. Thread Size: M22 x 1.5mm. Use with 22mm socket or spanner.

Suitable for Knorr-Bremse SB, SK and SN brake calipers. Popular applications include Bova, DAF, Foden, MAN, Mercedes-Benz, and Scania. Also used on BPW and SAF trailers. Manufactured from Chrome Vanadium with black phosphate finish.

Manufactured from Chrome Molybdenum. Specialised socket designed for brake calipers. Suitable for VAG vehicles such as VW Passat, Audi A3 etc. Manufactured from Chrome Molybdenum with a black phosphate finish.

Suitable for VAG vehicles such as Porsche, VW Touareg, Audi Q7 etc. 10-Point profile. 1/2"Sq drive x 10mm socket. Manufactured from Chrome Molybdenum with a black phosphate finish.

Adaptor enables retraction of the piston on rear brake calipers when used in conjunction with a traditional wind-back tool with a 2-pin adaptor mounting. 3-Pin design suitable for VAG vehicles.

Specialised socket designed for brake calipers. Suitable for Mercedes, BMW and Jaguar vehicles. Manufactured from Chrome Molybdenum with a black phosphate finish.

Suitable for brake caliper bolts found on Ford, Mercedes and Volvo vehicles. Manufactured from Chrome Molybdenum with a black phosphate finish.

Composite collection bottle with magnetic locating pad. Supplied with tube and connectors.

Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and reforming threads on exhaust system fuel vaporiser ports. Short lead-in on thread allows thread to be cut as close as possible to internal seat of the exhaust. Thread Size: M20 x 1.5mm. Use with 21mm socket or spanner.

Designed to thread into the brake drum's M8 x 1.25mm access points. Removes stuck brake drums safely and efficiently. To be used as a pair so that the drum is removed smoothly and squarely. 3/8"Sq drive.

Suitable for vehicles with discs all round. Retracts parking brake piston prior to installation of new pads. Five possible pin configurations fit US and European applications. Use with 3/8"Sq drive ratchet wrench and extension bar. Warning: Not for use with impact type ratchets.

Die-cast cutter body with heavy-duty HSS hardened cutting wheel. Smooth screw action for clean cutting performance.

Cylinder hone stone set - Fine 3 x 1-1/8". Application: VS022.

Cylinder hone stone set - Medium 3 x 1-1/8". Application: VS022.

Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. Features large viewing cut-away to allow correct alignment of washer. Simple push and twist action.

Purpose-made for the installation and removal of drum shoe return springs. Can also be used for removal/installation of spring from anchor stud. Suitable for most car and light commercial drum brakes.

Adjustable 2-pin brake wind-back adaptor suits a wide range of vehicle applications. 2-Pin drive compatible with Model No's VS0282, VS0285, VS0287, VS0286 and VS0211.

Manufactured from heat treated alloy steel. Specifically designed for installation and removal of drum brake shoe springs.

Smooth rounded jaw edges prevent damage to internal hose reinforcement. Quick and simple, one-handed use. Made from durable glass reinforced nylon. Material properties include lightweight, non-conductive and high-visibility colour to prevent accidental loss of clamp in the engine bay.

Composite 100ml collection bottle with magnetic locating pad. Supplied with non-return valve, tubes and connectors.

Cutting wheel for Model No. VS16371.

Designed for use on hydraulic braking systems. Adjusts the clearance between the brake drum and shoe. May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster. Suitable for cars and light commercials.