Comprehensive kit of adaptors and fittings for modern petrol fuel injection systems. Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with large high pressure gauge reading 0-145psi and 0-1000kPa and a small low pressure gauge for accurate low pressure readings. Pressure release valve fitted with long drain hose...

Used to check and adjust the alignment of the lasers on Model No. GA70 Four-Wheel Laser Aligner. This unit will allow workshops to check and adjust in-house. Laser heads secure to the rig and rest on the bobbins that contact the vehicle’s wheel rim. Supplied with comprehensive instructions.

Combines the function of surface temperature measurement and real-time thermal imaging. Features a traditional image camera to pinpoint test area with the ability to mix the thermal image over the top at varying intensities. Includes on-screen cursor to accurately locate temperature hotspots. Suitable for many industries including automotive, construction and electrical. Automotive • Heated...

Suitable for re-cutting inlet/exhaust valve seats concentric to the valve guides. Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application. Supplied in storage case.

Foot operated hydraulic unit, with gauge showing force applied to the spring under compression. Supplied with three pairs of different sized interchangeable yokes, for a wide range of vehicle applications. Fitted with plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer's guarantee.

High quality, European made, 1600kg coil spring compressor kit. Supplied with two pairs of drop-forged safety yokes, with polyurethane inserts for improved grip. Yokes are carefully shaped to prevent coil spring from bowing. Features Safety restraint wire as a precaution, in the unlikely event of a spring slipping.

The top mount bracket allows compression of tightly coiled springs. The bracket multi-hole configuration can be rotated and fixed in position with ease. Use in conjunction with SEALEY coil spring compressor RE3000. Applications - Nissan Qashqai. Renault Talisman, Megane, Master 3° Series, Kojar, Koleos, Peugeot 208, 3008, 5008. Tesla S. BMW X1, X2, X3, X4, X5, Series 1, Series 2. Ford Transit....

Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems. Fast and simple-to-use, maximising earning potential. System is clean and quick to use and connects to a 12V vehicle battery. Features EVAP and smoke mode with flow control valve. Supplied with cone adaptor, power cord clamp, valve core wrench, test oil...

The torque multiplier has a 1/2"Sq drive input and 3/4"Sq drive output. A torque multiplier is needed to remove and refit the crankshaft pulley bolt. Specially designed with the correct reduction ratio for the Ford EcoBoost engine. Contains securing bracket and fixings. Supplied in storage case with instructions.

Optical system uses low radiation laser beam to indicate toe-in or toe-out. Single leg configuration and reversible contact probes allow on-ramp use. Works on practically all cars and light commercials with rim diameters from 200mm(8") to 600mm(23.5"). Powered by 2 x AA batteries (not included) and includes operating instructions.

A hydraulic bead breaker kit is essential to change commercial and agricultural tyres. Hydraulic action which is suitable for breaking beads. 10 Tonne air pump, for use with the hydraulic bead breaker. Maximum air input 90-120psi. Hose assembly to connect the bead breaker and air pump. Length 1540mm with ¼” BSPT inlet thread. • Package includes: • TC966 - Hydraulic Bead Breaker. • RE83/840 -...

Heavy steel construction. Pneumatic bead breaker. Suitable for use on most automotive/light commercial open centred wheels. Features additional air line coupling for tyre inflator. Supplied with standard tyre bar and PCL couplings. To prevent damage to the rims of the alloy wheel, use optional Tyre bar, Model No. TC963 Tyre Bar.

The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines. Supplied in storage case with preformed liner and foam filled lid.

Suitable for re-cutting inlet/exhaust valve seats concentric to the valve guides. Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application. Supplied in storage case.

Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems. Fast and simple-to-use, maximising earning potential. Features single button operation, flow control valve and auto-power-off. Uses mineral oil and workshop air to generate smoke at low pressure while connected to a vehicle. System is clean and quick to...

Stainless steel fuel drainer with venturi type suction. 40L Capacity tank suitable for petrol or diesel. Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (ATEX 2014/34/EU).

Designed for the installation and removal of slotted bushes on commercial spring suspension. Includes a 12 Tonne hydraulic cylinder (supplied without hydraulic pump). Use in conjunction with Hydraulic Pump Model No's RE83/840/CWH (Air/Hydraulic) or RE97.10-01 (Hydraulic). Installation protects the bush using the parallel working tension elements. Suitable for use on the vehicle. Safe and...

The assist arm is a must have for mounting and dismounting low profile and run flat tyres and is for use in conjunction with Model No. TC10 Tyre Changer. Operated by air supply from tyre changer. Single air ram operates three separate arms with one control lever. See Sealey website for demonstration video.

Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump...

Reduce your waste disposal costs* - crushing filters minimizes the volume of your hazardous waste. Air operated oil filter press with safety lock-out device which prevents the door being opened during operation. Floor mounting unit with outlet for waste oil transfer. * For 'pay by volume' customers.

Fast and safe compression of road springs. 1000kg Air operated unit with safety locking guard. Supplied with two interchangeable plastic coated lower yokes and a suspension strut clamp. Fits a wide range of spring configurations and diameters. Also features a strut locating platform for easy movement of the suspension strut to avoid unnecessary lifting.

Stainless steel fuel drainer with venturi type suction. 90L Capacity tank suitable for petrol or diesel. Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (ATEX 2014/34/EU).

Fast, simple and accurate alignment of both front and rear wheels. Optimises vehicle performance and set-up after installation or modification of steering and suspension components. Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job. This fully portable kit is also ideal for...

Package includes: Model No. - Description GA70 - 4-Wheel Laser Wheel Aligner GA70CR - Calibration Rig for GA70

Semi-automatic balancer with auto-data input for offset and wheel diameter, data can be input manually if required. Steel and alloy settings depending on required location of wheel weights, including split (hidden) weight. Additionally the machine is self-calibrating with manual check option. Features auto-standby mode, foot operated brake, quick release locking wing nut, wheel guard with...