Removes surface dirt and corrosion on hubs fitted with studs. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Cleaning discs fit over wheel studs. Use with power drill or air impact wrench. Supplied with 1/2"Sq drive adaptor. Replacement cleaning pads available, order Model No. VS8002A.

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins. Supplied in storage case.

Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes brass, steel and nylon brushes Ø8-19mm, Soft grip handle and one-piece 150mm extension. Supplied in storage case.

For use when working on sensitive electronics without causing damage through electrostatic discharge. Large working surface – 900 x 600mm. Durable 2mm PVC which is chemical, oil and abrasion resistant. Four 10mm press stud connectors, suitable for left and right-handed use. Earthed wrist strap and crocodile clip with two 1.7m coiled earth leads included.

Wind speed measuring device featuring live/maximum/average/wind chill and Beaufort scale. Ideal for checking workshop dust/fume extraction devices. Also reads temperature which can be measured in either °C or °F. Readings are displayed on a 24mm high back-lit LCD screen. Features a battery indicator and auto/manual power-off.

Manufactured from Chrome Vanadium Steel for added corrosion resistance. Single Hex 6pt 120mm long sockets. Extra-deep socket set which is useful for deep-seated bumper, body panel, rear lamp and door hinge fittings. Can also be used for parking brake cable adjustment on BMW, Ford, VAG and Vauxhall/Opel. Sizes: 15, 16, 17, 18, 19mm.

Compatible with many brands of tyre inflator fitted with a 1/4” BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA399, SA37/93, SA37/95, SA400, SA9312, SA9313, SA37/93B, SA37/96B and SA37/99.

Superb for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). Set is suitable for the most popular threads used on cars and light commercial vehicles. Supplied in storage case.

Reinforced long reach tool designed to get to awkwardly positioned tag type hose clips. Flexible cable and compact head help operation in confined spaces. Features ratchet action for close control.

Innovative dual purpose tool designed to push and wind-back brake calipers. Fast and simple, one-handed use. Lightweight and durable materials enable the tool to work on most common caliper designs. Suitable for use on either left or right-handed wind-back calipers. Supplied with four common adaptors but compatible with all 2-pin magnetic adaptors in the Sealey range, making the tool truly...

36 Tools-in-one. Set of tools for safe, fast, authorised removal of fitted radios. Composite handle allows firm and comfortable grip.

Triple leg puller with reversible, drop-forged, Chrome Vanadium steel legs. Heat treated for added strength and chrome plated to resist corrosion. Swivel thrust plate prevents damage to shaft ends.

American-style drop tester. Load applied by internal switchgear - no sparking. Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.

Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compression testing, 0-7bar (0-100psi) for fuel pressure and 0-1bar (0-100kPa) for low pressure fuel.

Unique double end design for retracting left and right-handed rear caliper pistons.

Comprehensive set for the removal and installation of nuts on McPherson struts. Covers a large range of vehicle applications.

Soft-faced vinyl material prevents scratching and marking of paintwork during servicing. Unique design featuring a cut-out, allowing access to wheel whilst in place. Wing cover can be held in place with eight integral magnets, four suctions grips or a combination of both. Ideal for metal and plastic wings or securing onto headlight covers.

Steel chain wrench with 180º pivoting handle suitable for filters with limited access. Heavy-duty chain with spring locking mechanism for added security.

Forged Chrome Molybdenum steel 1/2"Sq drive sockets for removal of wheel locking nuts when the key is not available. May also be used on fixings too damaged or corroded for standard sockets. Set includes drift to aid removal of fixing from socket. Suitable for use with impact wrenches. For distribution to bona fide vehicle dealers and repair centres only.

VS705 Composite cone with steel core which enables the CV boot to be easily pushed over the CV joint in situ using VS701 without splitting the drive train. Slim design ideal for fitting CVJ boots where access is limited. CV96 Universal CVJ Boot is manufactured from high quality neoprene material. Supplied with fitting kit including clips, grease sachet and cutting guide. Suitable for most car...

Chromium plated caps fitted to some wheel nuts are prone to swelling, making them incompatible with standard whole size sockets. Half sizes allow secure fitment for safe removal. Double ended 80mm impact sockets 1/2"Sq Drive 6-point. Black phosphate finish.

Used to preserve the memory to on-board electronics whilst vehicle's own battery is disconnected. Saves valuable time spent re-programming lost codes. Can be connected via the vehicle's EOBD or vehicle accessory power socket. Unit features an internal 12V 7Ah sealed battery and LEDs provide battery condition and charge indicator. Supplied with mains charger.

Suitable for use on multi-valve petrol and diesel engines with deep-seated valves. Suitable also for general use on OHC, OHV and CVH engines. Universal jaw with 55-175mm capacity and 165mm throat depth. Reversible jaw and adaptor. Twin cam-action permits use from above or below valve.

Heavy-duty, high quality, 12-point, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool. Blackened finish for added corrosion resistance. Tool suitable for hub nut applications where high torque is required. Supplied in a storage case.