Puller yoke with 10 Tonne hydraulic ram. Suitable for four and five stud hubs. Hydraulic ram provides additional power to extract the most stubborn hubs.

Cooling system pressure test kit, with vehicle specific cap adaptors. Features quick release couplings, easy-to-read pressure gauge and release valve. Caps cover the latest Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Seat, Skoda, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW...

2.3kg Slide hammer with 580mm shaft. Use eight ways: external 3-leg puller, internal 3-leg puller, external 2-leg puller, internal 2-leg puller, grip wrench adaptor, lip puller, hub puller, dent puller. Supplied in storage case.

Designed for refrigerant testing, charging and evacuation. Can be used on automotive, commercial and domestic A/C and domestic refrigeration systems. Gauges marked for R134a and R12 pressure reading. Colour-coding on gauges, valves and hoses for easy operation. Features 2-way manifold and sight glass for monitoring refrigerant flow. Quick couplings included and hanging hook.

A comprehensive hose clip plier set with heavy-duty construction and ratchet locking mechanism on most pliers. Vinyl dipped handles give additional comfort. The kit consists of the following pliers: Space saver hose clip plier for areas where clip contact is restricted, jaw opening 0-70mm. Swivel Clic-R® type plier, jaw opening 0-34mm. Multipurpose hose clamp plier, jaw opening 0-40mm. Remote...

Heavy-duty triple leg 5 Tonne hydraulic puller. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 2-position puller legs and storage case.

Twin/triple leg puller set with reversible legs allowing internal and external pulling operations. Manufactured from carbon steel with a drop-forged heat treated construction for strength and durability. Supplied with two and three leg yokes. Thrust bearing prevents wear and damage to shaft. Hex head forcing screws suitable for use with a ratchet or spanner.

Designed to counter-hold water pump, camshaft, crankshaft, oil pump, pulleys and sprockets when loosening and tightening the securing bolts. Adaptors included: Ø4.8mm, Ø6mm, 15mm x 6mm square, 15mm x 12mm square, 13mm x 17mm cup, 16mm x 20mm cup, M10, M12 spline, 6mm/10mm/12mm stepped adaptors, adaptor plate and handle. Supplied in storage case.

Cast puller yoke with forged separator. 10 Tonne Hydraulic ram interchangeable with other units in the series. Supplied with Ø75-105mm bearing separator. Maximum puller depth 420mm. Supplied in metal case.

For extension kit see XXX Model No. - Description RWSBKIT - 25m Red/White Post & Chain Kit HVSA4 - 200 x 300mm High Voltage Warning Sign HYBRIDSIGN - Hybrid/Electric Vehicle Warning Sign (x2) HYBRIDTAG - Hybrid/Electric Vehicle Keyring Warning Tag Ideal for technicians working on modern hybrid and electrical vehicles.

Forged steel 2-way yoke allows twin or triple leg pulls. 10 Tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears and bearings. Three 3-position puller arms and three sets of extension plates, supplied in storage case. Hydraulic ram interchangeable with others in series.

Drop-forged Chrome Vanadium steel puller arms with locking/gripping feature. Set includes three sets of 100mm triple leg pullers with locking features which clamp the jaws firmly inside/outside the gear or bearing. Includes 1.2kg slide hammer. Supplied in storage case.

Cooling system pressure test kit, with vehicle specific cap adaptors and capless inflatable bladder. The combination of these two testing options gives extensive coverage over other system testers on the market. Caps cover the latest Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Peugeot, Porsche,...

Capless tester uses cone adaptor system to seal and pressurise the cooling system. Adaptors may be used to replace both screw and bayonet type cap fittings. Kit includes pump with gauge and four system adaptors for use on a wide range of vehicle applications.

Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Also suitable for motorcycles, off-road and marine applications. Supplied with a set of double end adaptors enabling testing of cooling system...

Heavy-duty triple leg 10 Tonne hydraulic puller. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 2-position puller legs and storage case.

Traditional style cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Volvo, VW. Also includes non-specific adaptors for other...

Medium stroke 1.5kg slide hammer with 395mm shaft and a screw-type bridge extractor. Gently removes blind bearings where the use of a slide hammer may damage the surrounding material. Includes bearing extractor collets with internal capacity from 8-34mm.

Cooling system pressure testing kit, designed for commercial vehicles. Pressure pump with gauge quickly identifies faulty gaskets, radiators, weeping pipes and other causes of coolant loss.

Cast puller yoke with forged separator. Supplied with 10 Tonne hydraulic ram. Suitable for pulling commercial vehicle size bearings from Ø105-200mm. Hydraulic ram interchangeable with other sets in the range. Maximum puller depth 420mm. Supplied in metal case.

Heavy-duty pressure test kit. Aluminium radiator header tank caps are colour-coded for ease of use and have quick release fittings. Suitable for a wide range of vehicle applications. Locate system leaks from: • Head gasket • Header tank • Radiator and heater cores • Water pump, plugs, hoses and housings Heavy-duty pump unit features smooth action and large, easy-to-read, scale. Long hose aids...

Traditional style cooling system pressure testing kit. Features five new adaptors increasing the vehicle applications. Suitable for Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW. Also includes non-specific adaptors for other makes....

Forged steel 3-way bearing separator and gear puller set. Operated with supplied 10 Tonne hydraulic ram or manual force screw. Features a selection of extension rods depending on reach required.

Master set of gear pullers and bearing separators supplied in storage case. Forged steel bearing separator. 10 Tonne Hydraulic ram compatible with other sets in the range.