Suitable for testing 6, 12 and 24V DC circuits. Insulated, pointed probe tests through wire insulation. Supplied with 1.5m cable and crocodile earth clamp.

Chrome polished carbon steel construction with 3/8" and 1/2"Sq drive. Also suitable for use with a 21mm spanner. Claws grip filter tighter as more torque is applied. Fits a range of popular motorcycle can filters ranging from Ø43 to 102mm.

Designed to be used with any 1/2"Sq drive breaker bar. Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer’s exact specification. Supplied with fully adjustable reaction arm. Essential measuring tool for the busy workshop.

Forged pliers with chemically blackened finish. Serrated Jaws with long handles for extra grip on oily filters. Dipped non-slip rubber grip handles for added comfort and control.

Stone set for Model No. VS162 glaze breaker. Application: VS162.

LED Indicators verify condition of battery and alternator. Suitable for 12V DC systems. Magnetic backing sticks to metal surfaces for hands-free operation. Fitted with 900mm cable, probe and crocodile clips.

Designed for professional installers and vehicle technicians. Capable of overcoming most day-to-day cable installation problems, particularly in domestic and commercial buildings. Ideal for installing wires through vehicle bodywork. Includes a hook and flexible joint with eye and 320mm screw-in polyester rods (x10) with a total length of 3.2m. Supplied in storage tube.

Designed to separate the engine or gearbox sump without damaging the sump. Thin blade allows for the seal to be broken by lightly tapping the body with a hammer. Features two handle locations making it ideal for use in confined engine spaces.

Essential tool for spark plug removal. Separates the HT leads from the deep-seated spark plugs fitted to VAG vehicles.

Die-cast tools suitable for press-type quick disconnection joints found on Chrysler, Ford and Vauxhall/Opel vehicles. Swivel action allows quick selection of correct sized tool.

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm (85lb.ft) of torque. Low profile design suitable for use in confined areas.

Used to prevent piston ring damage while inserting pistons into the cylinder head. Easily removed when cylinder is in place. Tool supplied with four ring clamps ranging from Ø40-85mm. Will fit most engine sizes.

Required for priming injection pump following diesel filter change, drainage of fuel tank or any other disturbance of the fuel system. Supplied with two fuel pipe clips.

Thread inserts for Model No. VS5281 Oxygen Sensor Thread Repair Kit M18 x 1.5mm.

Set allows single or multiple testing. Simply fit tester between spark plug and HT lead and then run engine. Regular flashing of the testers indicates a good HT supply. Not suitable for engines with deeply recessed plugs.

Chrome Vanadium steel socket for diesel injector removal and installation. Suitable for injectors fitted to Ford, Mitsubishi, Nissan, Vauxhall/Opel, VW, light commercial and commercial vehicles.

Forged pliers with chemically blackened finish. Serrated Jaws with long handles for extra grip on oily filters. Dipped non-slip rubber grip handles for added comfort and control.

Suitable for 6, 12, 24 and 48V DC circuits. LED array indicates polarity and voltage range. Supplied with 850mm cable and crocodile earth clamp.

Suitable for removal of spark plug boot on deep-seated engine applications. Composite handles provide insulation from HT shock and give added comfort and control.

Ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.

Quickly locate the source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure and blown gaskets. Also useful for tracking down dashboard rattles and squeaks. Plastic ear pieces and 300mm probe with sound amplifying chamber.

Satin finish steel construction with 3/8" and 1/2"Sq drive. Also suitable for use with a 21mm(13/16") spanner. Claws grip filter tighter as more torque is applied.

Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into the combustion chamber, then expanded to the correct size starting on the inner, undamaged threads. Traditional thread restorers rely on luck for the restored and undamaged threads to align. The first letter(s) of a Denso, NGK and Bosch plug code is...

2-Piece injector bore cleaning brush set. Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.

3mm Steel construction with safety grips. Crimps non-insulated terminals 10-14, 16-18 and 20-22 AWG wire. Crimps open barrel connectors 14-18 and 20-22 AWG wire. Crimps computer pins and sockets D-Sub 26-28 AWG wire. Crimps butt-insulated connectors 22-26 AWG wire. Crimps telephone piercing spade lugs 22-26 AWG wire. Hardened cutting edge for soft wire and cables.