Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Plate-steel construction, chemically blackened with oversize vinyl grips. 5-in-1 Wire stripper suitable for wires from 0.13-6mm² (26-10AWG). Crimping attachment suitable for non-insulated terminals including 1.5, 2.5, 4 and 6mm², also insulated auto-ignition terminals 7 and 8mm. Crimps insulated terminals 1.5, 2.5 and 6mm². Includes wire cutters hardened to 40-50 HRC.

Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key.

Satin finish steel construction with 3/8"Sq drive. Spring loaded claws automatically adjust to the size of the filter. Features magnets to help positioning on oil filter.

Suitable for testing DC circuits with voltages between 3 and 28V. No earth clips to get tangled - simply contact the wire to be tested and touch your finger on bare metal ground to get a reading. Tester illuminates LED, buzzes and vibrates on contacting live wire. Computer-safe for use around delicate engine management systems. Supplied fitted with two long-life N-sized batteries.

Set includes three wrenches; 8mm, 9mm, 10mm and three types of adjuster shafts; flat blade type, 3mm, 4mm square type. The wrenches and shafts are interchangeable to give nine different combinations suitable for tappet adjustments on most motorcycle and ATV engines.

Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool at required set size with quick release when finished.

Ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.

Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Supplied with three different lengths of thread insert.

Manufactured from high carbon steel with precision dual ground cutting blades. Features spring loaded handles with soft grip and safety lock.

Satin finish cast steel body with 3/8" and 1/2"Sq drive. Designed for use with ratchet wrench, but may also be used with a 21mm(13/16") spanner. Extra-wide nylon webbing strap.

Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems. Can also be used to calibrate the driver's instrument panel. Will also check the engine oil level on Audi; A4/A5 3.2 6-cylinder engines.

Essential for reintroduction of fuel into fuel pump following maintenance such as fitting of new diesel filter, or following drainage of fuel tank. Must be used whenever fuel system is disturbed.

Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into the combustion chamber, then expanded to the correct size starting on the inner, undamaged threads. Traditional thread restorers rely on luck for the restored and undamaged threads to align. The first letter(s) of a Denso, NGK and Bosch plug code is...

For removing and refitting the fuel filter cap when replacing the fuel cartridge on 2.0D, 2.4D, 2.5TDi diesel engines found in VW and Volvo vehicles.

Refill pack for Model No. VS640 Mercedes CDi Injector Stud Repair Kit. Contains five M8 x 1mm inserts.

Check fuel injector signal faults fast. Simply disconnect injector harness and plug in noid light. Turn the ignition on - if the light is steady or absent, then signal from ignition system is at fault. Easy-to-use and fits a wide variety of injector harnesses.

Fast, accurate and safe current measurement at the fuse box. Ideal for fault-finding on car and commercial vehicle electrical circuits. Features large LCD display. Plugs straight into the vehicle's fuse board.

Fast, accurate and safe current measurement at the fuse box. Ideal for fault-finding on car and commercial vehicle electrical circuits. Features large LCD display. Plugs straight into the vehicle's fuse board.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.