Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and repairing damaged threads on the sensor port, prior to new sensor being fitted. Thread Size: M22 x 1.5mm. Use with 22mm socket or spanner.

Manufactured from Chrome Vanadium steel with black phosphate finish. Suitable for cleaning and reforming threads on exhaust system fuel vaporiser ports. Short lead-in on thread allows thread to be cut as close as possible to internal seat of the exhaust. Thread Size: M20 x 1.5mm. Use with 21mm socket or spanner.

Cutting wheel for Model No. VS16371.

Invaluable when installing exhaust systems. Two T-handled tools allow easy fitting of exhaust mounts. 90° And 120° hooks to suit block and ring mounts respectively.

Steel construction with dipped vinyl handle. Enables fast removal and installation of rubber anti-vibration mountings found on exhaust systems.

The only official design of tool fully approved for MOT use in the UK. Metal shaft and composite body in accordance with DVSA specification. Durable design reduces risk of breakage of joint if dropped. Check for the DVSA approved markings.

Hardened and tempered drop-forged Chrome Vanadium steel with recessed panel and satin finish. Specially designed for use with slotted retaining rings. Hook and pin interchangeable hinged arms.

Opens exhaust hose clamps quickly and easily. Ideal for Citroen, Peugeot and Renault exhaust clamps. Also suitable for prising open any type of clamp or clip secured with nut and bolt. Comfort grip handles with self-locking mechanism aid working on spring clamps.

Robust steel tool for the safe removal and installation of the spring clamps used to attach exhaust system to manifold on VAG vehicles. Use with 17mm spanner.

Enables fast, one-handed removal of exhaust brackets from rubber hangers. Suitable for a wide range of cars and light commercial vehicles.

DVSA Approved tool, which simplifies vehicle testing by allowing any test that requires the brakes to be applied to be carried out by one person rather than two.

Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing...

Suitable for cutting exhaust pipes and steel or copper tubing up to Ø83mm. Plier design handles allow for even cutting pressure and enables access where space is restricted. 90° Handle movement produces a 360° cut.

Chain for Model No. AK6838.

Calibrated and DVSA approved for use when testing all classes of vehicle. Hardened and tempered stainless steel gauge. Metric and Imperial calibration with conversion between the two. Zero reset control allows for comparative measurement. Includes flat surface plate for accurate zeroing of gauge prior to use. Supplied in storage case.

Suitable for cutting thin-wall tubing up to 2.5mm thick. Designed to enable access where space is restricted. Ideal for cutting stainless steel exhaust pipes.

Shadow board for MOT approved and compliant tools (tools not included). Keeps tools organised and in one location. Wall mounting and supplied with fitting kit.

EGT (Exhaust Gas Temperature) sensor socket set includes both straight and offset versions. Specially designed to reach 13, 14 and 17mm EGT sockets. 6-point 3/8"Sq Drive with a black phosphate finish.

DVSA Approved for use in testing stations on vehicle classes 4, 5 and 7. Quick and simple test of 12V 13-pin Euro-type sockets fitted to the rear of the vehicle. Supplied with 4.9m cable to enable the operator to use the tool whilst sitting in the vehicle. Features self-test facility to ensure the serviceability of the tool. Powered by 12V vehicle supply. Also tests the 12V continuous/ignition...

Ideal for fitting aftermarket components to standard exhausts. Used to expand a length of pipe in equal proportions so the pipe is the same diameter and not tapered. Ensures a perfect fit with no leaks and also removes dents and clamp marks.

700mm Rail set only. Suitable for Headlamp Beam Setters Model No. HBS97 (with the addition of Wheel Set).

Universal application pipe cutter designed for where access is restricted. Ratchet mechanism allows cutting without having to rotate the tool completely around the tubing. Suitable for the toughest materials including stainless steel exhaust pipes.

Features soft rubber cylindrical exhaust pipe cones to suit most vehicles. Allows exhaust fume extractor to be used on twin exhaust vehicles. Suitable for use with Model No. EFS07 and EFS/93 Exhaust Fume Extractors.

Twin extensions to Model No. HBS97R Rails for Headlamp Beam Setter. Additional length extends suitability of Model No. HBS97 for class V, VI and VII applications.

Shadow board with MOT approved and compliant tools. Keeps tools organised and in one location. Wall mounting and supplied with fitting kit. Board also available separately - Order Model No. MOTB.