Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
518 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£35.88Price
Replacement plastic sump plug used on Citroen/Peugeot and Ford vehicles. Ford OEM Part Number: 1871598. Citroen/Peugeot OEM Part Number: 9801444780.
£35.88Price
£35.88Price
Replacement plastic sump plug used on BMW vehicles. BMW OEM part number: 11137605018.
£35.88Price
£35.88Price
Replacement plastic sump plug used on VAG vehicles. Also suitable for the camshaft cover on VAG 1.6D and 2.0TDi diesel engines. VAG OEM part number: 06L 103 801.
£35.88Price
£36.34Price
Locks in place for safe clip removal/refitting. Ideal for use in confined areas. Single-handed use. Range 5-55mm.
£36.34Price
£36.60Price
Quality 28mm EVA mats ideal for the busy mechanic. Oil and water-resistant. Set comprises of full length and kneeler mats for use on workshop floors when working on wheels, brakes, tyres and exhausts. Also ideal for roadside repairs.
£36.60Price
£36.68Price
Chrome Vanadium steel extra-long shafts with comfort grip handles. Suitable for various vehicle applications including, removal of hose clips, hoses, O-rings and seals.
£36.68Price
£36.68Price
Four short picks with knurled, steel shafts. Four long picks and one scraper with black finished steel shafts. Suitable for pin/clip picking, hose removal and gasket scraping. Ergonomically styled handles for comfort, grip and accuracy.
£36.68Price
£37.30Price
Designed to reduce the amount of time taken to replace the engine oil filter on Vauxhall/Opel vehicles fitted with the B20 diesel engine. Once the drain funnel is located, oil draining from the oil filter can be channelled into a suitable receptacle. Time-saving tool as it eliminates oil spillage onto vehicle chassis and components during filter change.
£37.30Price
£37.31Price
Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock.
£37.31Price
£38.26Price
3-Piece axle bearing remover set is designed for easy removal of rear axle bearings. Use with Sealey slide hammer PS983 or PS992 (sold separately). Puller head sizes: 20, 24, 30mm. Supplied in storage case.
£38.26Price
£38.26Price
Designed to remove the copper injector seal when it has stuck into the head. Adjusts to allow seals with Ø6.7-8.7mm internal diameter to be removed. Simply drop the tool into the hole left by the injector, tighten the handle and lift out the seal.
£38.26Price
£38.58Price
Detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, data-hold and auto-power-off. Temperature is displayed on a large 23mm LCD HD colour screen with back-lit display for use in low light areas. Temperature can be shown in either °C or °F. Temperature Range: -50°C to +400°C (-58°F to +752°F). Powered by 2 x AAA batteries...
£38.58Price
£64.03Price
Multipurpose coolant filling system, supplied with six reservoir adaptors, to fit popular sizes of reservoir. Built-in shut-off valve and cleverly designed flow pipe system helps prevent air locks.
£64.03Price
£66.66Price
For quick removal/installation of valve collets, firmly push or tap tool with a hammer, magnet in tool captures collets. Can be used with cylinder head in situ or on workbench. Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. For in situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion...
£66.66Price
£39.45Price
Flexible work mat with five folds for easy storage. EVA foam padding for added comfort and hard wearing. Ideal for working on cold garage floors and for roadside repairs. Open size: 1200 x 455 x 23mm.
£39.45Price
£39.45Price
Steel jaws with PVC coated handles for added comfort. Features a double setting reaction bar, allowing for pre-tensioning for positive clamping. Mechanical lock avoids any damage to the collar at the end of the operation. Double-jointed pivot allows for minimal clamping effort. Suitable for medium sized closed and open ear-type clips.
£39.45Price
Diesel engine glow plug compression test adaptor kit that cover a wide range of modern vehicles. For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
See Sealey website for complete vehicle applications.
£39.87Price
Diesel engine glow plug compression test adaptor kit that cover a wide range of modern vehicles. For use in conjunction with Sealey Diesel Compression Gauge, Hose & TDC Base Kit (Model No. VSE3157).
See Sealey website for complete vehicle applications.
£39.87Price
Replacement plastic sump plug used on Ford vehicles. Ford OEM part number: 1830727.
£39.87Price
£39.87Price
Comprehensive set of Chrome Vanadium steel keys with sliding T-bar. Suitable for sump plugs on engine, gearbox and back axle.
£39.87Price
£40.17Price
Easily disconnects hoses by firmly gripping the lines/tubes. Especially suitable for hoses connected to lines/tubes with a smooth surface where a pushing force is not possible. Pointed jaw tip allows access in confined spaces. Locking design enhances secure gripping and allows single-handed operation. Suitable for 3/16"(5mm), 1/4"(6mm), and 3/8"(10mm) lines and tubes.
£40.17Price
£41.21Price
Heavy-duty twin leg bar type puller, suitable for easy removal of pulleys, flywheels, bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Zinc plated for corrosion resistance. Thrust bearing prevents wear and damage to shaft.
£41.21Price
£41.46Price
Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing...
£41.46Price
Set of three different size spanners for removing and refitting fuel tank sender mounting rings. Includes 2-leg and 3-leg configurations ranging from Ø85mm to Ø170mm.
£41.46Price
£41.46Price
Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.
Note: Not suitable for vehicles with deep-seated valves.
£41.46Price
£41.46Price
Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.
£41.46Price
£41.46Price
Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.
£41.46Price
For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.
£41.62Price
£42.96Price
Specially designed jaws give excellent grip onto a wide range of vehicle hose clips. 440mm Double-jointed feature gives a long reach, allowing easy-access into places such as bottom radiator hoses. Clever spring loaded locking function allows use one-handed. 75mm Jaw capacity. 35° Angled head version available for access into difficult tighter areas in the engine bay, Model No. VS1677.
£42.96Price
£43.06Price
Compression tester fitted with Ø63mm gauge reading up to 300psi(20kg/cm²). Kit includes 130mm straight and angled push-on connectors, 300mm flexible extension with 10, 12, 14, 18mm adaptors. Supplied in storage case.
£43.06Price