Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
592 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£41.46Price
Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.
Note: Not suitable for vehicles with deep-seated valves.
£41.46Price
£41.46Price
Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.
£41.46Price
£41.46Price
Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.
£41.46Price
For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.
£41.62Price
Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case.
£43.04Price
£43.06Price
Compression tester fitted with Ø63mm gauge reading up to 300psi(20kg/cm²). Kit includes 130mm straight and angled push-on connectors, 300mm flexible extension with 10, 12, 14, 18mm adaptors. Supplied in storage case.
£43.06Price
£43.86Price
Low profile design for removing paper cartridge oil filter housing caps and slotted canister style oil filters. Use with 3/8"Sq drive for 24, 27, 29, 32, 36mm and 1/2"Sq drive for 42mm. Supplied in storage case.
£43.86Price
£43.86Price
Aluminium cap type filter wrenches with 3/8"Sq drive. Low profile design for removing paper cartridge style oil filters commonly fitted to vehicles including Ford, Mercedes, Vauxhall/Opel and VW. Supplied in storage case.
£43.86Price
£44.50Price
Imperial graduated 25 blade feeler gauge. Dual marked in Imperial and Metric. Extra-long blade pattern. Blade dimensions 300 x 13mm.
£44.50Price
£44.50Price
Large forged pliers with chemically blackened finish. Serrated jaws and long handles for extra grip on oily filters. Features a ratchet joint adjustable head. Essential tool for removing commercial filters.
£44.50Price
£44.85Price
Carbon steel body with spring loaded centring pin. Suitable for cutting gasket material, cork or leather. Supplied in storage case with nine dies.
£44.85Price
£44.96Price
Enables thorough flushing of debris and contaminants from cooling system during repair and maintenance. Powered by workshop air, which creates a vacuum to draw water from a container. Can also be used with mains pressure tap water.
£44.96Price
£45.60Price
Detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, data-hold and auto-power-off. Temperature is displayed on a large 23mm LCD HD colour screen with back-lit display for use in low light areas. Temperature can be shown in either °C or °F. Temperature Range: -50°C to +530°C (-58°F to +986°F). Powered by 2 x AAA batteries...
£45.60Price
£45.60Price
Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.
£45.60Price
Suitable for Hyundai and Kia chain drive diesel engines. Essential tool for removing the fuel pump sprocket on 2.0D - 2.2D diesel engines.
£45.92Price
£46.64Price
Ø8mm Wi-Fi Borescope, compatible with iOS, Android and Windows operating system. IP67 Rated camera and cable up to LED light control switch. Up to 720HD resolution. 2m Pixel camera with six LEDs and a 3.7V 800mAh battery. The kit includes charging cable, hook, magnet and side mirror. Probe length of 5m. Transmission distance within 5-30m.
£46.64Price
£47.05Price
Suitable for installation/removal of ignition coils and separating the HT leads from deep-seated spark plugs on VAG vehicles. Long shafts with composite T-style handle for added control and stability. Prevents damage to ignition coils whilst allowing faster removal. Supplied in storage case.
£47.05Price
£111.67Price
Set includes flexible 3/8"Sq drive adaptor, hinged at both ends for ease of access to confined areas and 10-17mm crow's foot injector pipe sockets. Supplied in a storage case.
£111.67Price
Contains the tooling required to set and lock the engine along with a tensioner locking pin on Ford 1.6 EcoBoost engines. Includes a time-saving crankshaft pulley alignment tool. Camshaft locking tool is included which has to be used to set and lock the camshafts into their timing position when the variable valve timing sprockets have to be removed. Timing pins included are suitable for Ford...
£47.83Price
Suitable for BMW N20 and N26 2.0L engines. Use in conjunction with Model No. VSE6188 Timing Tool Kit. Supplied in a storage case with instructions.
£47.83Price
Suitable for Ford 2.2TDCi Duratorq chain drive diesel engines. Includes useful crankshaft holding wrench, and a slimline camshaft locking pin to allow the exhaust camshaft sprocket to be removed with the pin in situ.
£47.83Price
Suitable for removing fuel pump sprocket on Ford 2.2 Puma chain drive diesel engines. From 2011 the fuel pump sprockets no longer have threaded holes fitted in them. This tool is a great time-saver as it allows the fuel pump to be removed without disturbing the timing chain.
£47.83Price
Suitable for setting and locking Fiat 2.3D JTD diesel engine (belt driven), Fiat 3.0D JTD diesel engine (chain driven) and Citroen/Peugeot 3.0D Hdi diesel engine (chain driven). Set comprises camshaft setting pins, crankshaft locking pin and sensor locking pin.
£47.83Price
Essential tool for compressing the hybrid starter generator (HSG) belt tensioner spring when replacing the drive belt.
£47.83Price
£47.83Price
Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins. Supplied in storage case.
£47.83Price
£47.85Price
Superb for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). Set is suitable for the most popular threads used on cars and light commercial vehicles. Supplied in storage case.
£47.85Price
£47.85Price
Reinforced long reach tool designed to get to awkwardly positioned tag type hose clips. Flexible cable and compact head help operation in confined spaces. Features ratchet action for close control.
£47.85Price
Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compression testing, 0-7bar (0-100psi) for fuel pressure and 0-1bar (0-100kPa) for low pressure fuel.
£66.98Price
£49.52Price
Steel chain wrench with 180º pivoting handle suitable for filters with limited access. Heavy-duty chain with spring locking mechanism for added security.
£49.52Price
£50.96Price
Suitable for use on multi-valve petrol and diesel engines with deep-seated valves. Suitable also for general use on OHC, OHV and CVH engines. Universal jaw with 55-175mm capacity and 165mm throat depth. Reversible jaw and adaptor. Twin cam-action permits use from above or below valve.
£50.96Price