High resolution laser thermometer that detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, Maximum/Minimum/Average/Difference readings, data storage and data-hold function, high/low alarm setup, auto-power-off. Temperature is displayed on a large 29mm LCD panel with back-lit display for use in low light areas. Temperature...

Diesel engine compression gauge, which reads up to 600psi. Used in conjunction with Sealey glow plug adaptor kits (Model No's VSE3151, VSE3152, VSE3153). Features TDC finder which connects onto glow plug adaptors. Supplied in storage case with extra storage space.

Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool, reamer, two taps and five inserts in storage case.

Comprehensive kit for separating automotive air conditioning hoses and fuel lines. Suitable for a wide variety of vehicles including, amongst others, Ford and Vauxhall/Opel. Supplied in storage case.

Check for ball joint wear and brake disc run-out quickly and easily. Locking pliers secure to any convenient position, enabling DTI gauge to be placed against brake disc. Kit includes Metric calibrated DTI gauge.

Comparative electrolytic type tester. Checks moisture content of fluid by resistance to electric current. Easily calibrated using new brake fluid. Audible test cycle with three LED read-out. Just insert probe and press button for immediate result. Works on DOT 3, 4 and 5.1 specification fluids. Powered by a 9V battery (not included).

Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images. Tablet design makes the image incredibly clear but also very portable. Features controls for light intensity, digital zoom and image rotation. Waterproof probe pod with IP67 rating. Powered by 2600 mAh rechargeable with 5 hour working time (USB Charging cable supplied). SD card can be...

High performance handheld borescope with 60mm colour LCD screen and waterproof probe pod with IP67 rating. Features video record/playback and still images. Videos and images are stored on a micro SD card (not included). 2.5Ah Lithium battery capacity allowing up to 10 hours working time. Kit includes 45° mirror, hook and magnetic pick-up. USB Charging cable supplied.

Comprehensive master set of adaptors suit a wide range of vehicle applications. Suitable for push-back and wind-back brake pistons. Includes left and right-handed thrust bolt assemblies. Left-handed thrust bolt required for Citroen, Ford, and Renault applications. Precision made adaptor plates with thrust bolt assembly and reaction plate. Kit helps prevent damage to pistons and seals. Supplied...

Brake reservoir bleed caps specially designed for use on Tesla vehicles. Manufactured from aluminium, this adaptor is suitable for pressure bleeding works that require a pressure range up to 2.5bar/36psi. Heavy-duty adaptor set for Tesla Model S & X and 3 & Y. Compatible with SEALEY Brake Bleeder Models No's; VS0204, VS0204A, VS0207, VS820, VS821.

Suitable for small capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.

Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images. Tablet design makes the image incredibly clear but also very portable. Features controls for light intensity, digital zoom and image rotation. Waterproof probe pod with IP67 rating. Powered by 2600 mAh rechargeable with 5hr working time (USB Charging cable supplied). SD card can be...

One-person professional pneumatic brake and clutch bleeding tool. Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry. Pressure range makes the unit suitable for use with ABS systems. Fitted with Ø45mm cap with a 90° angled connector which is suitable for most European models. Compatible with Sealey VS0204B, VS0204C,...

Designed for removing BMW 2.0, 2.5, 3.0 diesel fuel injectors from M47/M57 engines. Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. Also suitable for some Land Rover, MG and Vauxhall/Opel vehicles that share the same engine.

Comprising of two gauges for positive/negative and main pressure testing on low-pressure delivery fuel circuit found on common rail systems. Compatible with 9.98mm button type connection system. Suitable for use with Model No's VS555 and VS552 for those systems not supported by 9.98mm button type connections. Can be connected in situ with fuel line for real time running pressure. Quickly...

Features 300psi gauge with large rubber bumper. Includes extension for deep-seated plugs and flexible extension hose. Suitable for petrol engines with 10, 12, 14, 18mm spark plug threads. Supplied in storage case.

Professional vacuum/pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel, ignition, transmission, emission and air conditioning/heating. Kit also includes reservoirs, hoses and adaptors for bleeding brake and clutch systems. Features lightweight aluminium body with simple twist function for choice of pressure or vacuum testing. Large rubber easy-to-read...

Measures disc thickness (external) and small drums (internal). Hardened and tempered stainless steel gauge. 11mm High figures in LCD display for ease of reading. Metric or Imperial read-out with ‘Hold’ function. Zero setting control allows for comparative measurement. Supplied with calibration certificate and storage case.

Suitable for five common sizes of thread. Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Includes drill bits, thread taps, stainless steel thread inserts, insert installation and lug breaking tools. Supplied in metal storage case.

Threaded insert repair kit for Mercedes CDi engine Injector clamping bolt. Enables a broken stud repair to be carried out with minimal dismantling. Contents: M8 x 1mm Tap, 7mm/8mm Stepped Drill, 6mm Drill, Drill Guide, Thread Insert Fitting Tool, M8 x 1mm Threaded Inserts (x5). Thread inserts available separately in packs of five.

Ø65mm Gauge fitted with heavy-duty cover. Tests oil pump pressure and also low oil warning devices. Fitted with quick coupling adaptors and 1.3m hose. Includes 90° coupling adaptor for limited access applications.

Ø59mm Gauge fitted with 250mm hose and quick connect. Scale reads from 0-21bar(0-300psi). Kit includes four extension hoses, seven plug thread adaptors from 10 to 18mm and a self-sealing quick connector. Suitable for most petrol engine cars and light commercials. Supplied in storage case.

Suitable for the removal of stubborn Bosch/Delphi diesel injectors. Set includes two adaptors for different removal methods. The first screws onto the injector cap and the second locates internally inside the injector allowing extra force to be used. Features a flexible joint allowing the slide hammer to be used in restricted areas. Supplied in storage case.

Designed to remove the lip and corrosion that can form on the brake disc. The handle bolts to the hub and provides a smooth easy method of spinning the disc for effortless lip and corrosion removal. The set consists of crank handle, scraper and steel blades (x2).

Locate problems relating to commercial vehicle air brake pressure quickly and easily. Suitable for use at the roadside or workshop. Features a large 0-20bar(0-300psi) gauge with rubber bumper and hose. Includes wire brush and male and female couplings. Supplied in storage case.