Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
771 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£41.46Price
Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing...
£41.46Price
£41.46Price
Detects and confirms radio frequency and/or infrared emission from key fobs and remote controls. Helps diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle. Magnetic backing sticks to the side of any ferrous surface for testing the range of the transmitter. Suitable for a wide variety of vehicle manufacturers.
£41.46Price
Set of three different size spanners for removing and refitting fuel tank sender mounting rings. Includes 2-leg and 3-leg configurations ranging from Ø85mm to Ø170mm.
£41.46Price
£41.46Price
Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No.VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines.
Note: Not suitable for vehicles with deep-seated valves.
£41.46Price
£41.46Price
Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.
£41.46Price
£41.46Price
Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.
£41.46Price
For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm. Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm. Adjustable spring tension gives finish control.
£41.62Price
Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case.
£43.04Price
£43.06Price
High precision multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Double moulded housing with soft grip case and large display for ease of use. Probe and lead storage. Integral upright stand for use on the workbench. Supplied in zipped pouch with carry strap.
Measures:
• AC and DC Voltage
• DC Current
•...
£43.06Price
£43.06Price
Compression tester fitted with Ø63mm gauge reading up to 300psi(20kg/cm²). Kit includes 130mm straight and angled push-on connectors, 300mm flexible extension with 10, 12, 14, 18mm adaptors. Supplied in storage case.
£43.06Price
All steel construction with large comfort grip handles, angled head and hardened and tempered jaws. Ratchet action ensures consistent crimping.
£43.06Price
£43.86Price
Low profile design for removing paper cartridge oil filter housing caps and slotted canister style oil filters. Use with 3/8"Sq drive for 24, 27, 29, 32, 36mm and 1/2"Sq drive for 42mm. Supplied in storage case.
£43.86Price
£43.86Price
Aluminium cap type filter wrenches with 3/8"Sq drive. Low profile design for removing paper cartridge style oil filters commonly fitted to vehicles including Ford, Mercedes, Vauxhall/Opel and VW. Supplied in storage case.
£43.86Price
£44.50Price
Imperial graduated 25 blade feeler gauge. Dual marked in Imperial and Metric. Extra-long blade pattern. Blade dimensions 300 x 13mm.
£44.50Price
£44.50Price
Large forged pliers with chemically blackened finish. Serrated jaws and long handles for extra grip on oily filters. Features a ratchet joint adjustable head. Essential tool for removing commercial filters.
£44.50Price
£44.56Price
Competitively priced EOBD code reader. OBDII/EOBD compliant vehicles Petrol 2001 and Diesel 2004 onwards. CAN enabled retrieves generic P0, P2 and P3 and U10 codes and picks up manufacturer specific P1, P3 and U1 codes. This easy to use tool will then turn off the MIL light, clear codes and resets monitors. Supplied with comprehensive instructions.
£44.56Price
£44.85Price
Carbon steel body with spring loaded centring pin. Suitable for cutting gasket material, cork or leather. Supplied in storage case with nine dies.
£44.85Price
£44.96Price
Enables thorough flushing of debris and contaminants from cooling system during repair and maintenance. Powered by workshop air, which creates a vacuum to draw water from a container. Can also be used with mains pressure tap water.
£44.96Price
£45.45Price
Time-saving tool ideal for the automotive electrician and mechanic. Connects to the vehicle’s own battery and reaches all corners of the vehicle with 5m cable. Checks for short circuits and bad earths quickly and easily. Tests continuity and polarity using flying lead and also indicates voltage (2V to 24V) of system on test using an LED array. Power-up components prior to installation and check...
£45.45Price
£45.60Price
Detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, data-hold and auto-power-off. Temperature is displayed on a large 23mm LCD HD colour screen with back-lit display for use in low light areas. Temperature can be shown in either °C or °F. Temperature Range: -50°C to +530°C (-58°F to +986°F). Powered by 2 x AAA batteries...
£45.60Price
£45.60Price
Accurately pinpoints automotive noises and vibrations, which are converted into an electrical signal and amplified. Long pick-up shaft allows use in hard-to-reach places. Features a volume control and supplied with headphones. Powered by 9V battery (supplied).
£45.60Price
£45.60Price
Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.
£45.60Price
Suitable for Hyundai and Kia chain drive diesel engines. Essential tool for removing the fuel pump sprocket on 2.0D - 2.2D diesel engines.
£45.92Price
£46.25Price
Suitable for cutting exhaust pipes and steel or copper tubing up to Ø83mm. Plier design handles allow for even cutting pressure and enables access where space is restricted. 90° Handle movement produces a 360° cut.
£46.25Price
£46.64Price
Ø8mm Wi-Fi Borescope, compatible with iOS, Android and Windows operating system. IP67 Rated camera and cable up to LED light control switch. Up to 720HD resolution. 2m Pixel camera with six LEDs and a 3.7V 800mAh battery. The kit includes charging cable, hook, magnet and side mirror. Probe length of 5m. Transmission distance within 5-30m.
£46.64Price
£46.87Price
£47.05Price
Suitable for installation/removal of ignition coils and separating the HT leads from deep-seated spark plugs on VAG vehicles. Long shafts with composite T-style handle for added control and stability. Prevents damage to ignition coils whilst allowing faster removal. Supplied in storage case.
£47.05Price
£111.67Price
Set includes flexible 3/8"Sq drive adaptor, hinged at both ends for ease of access to confined areas and 10-17mm crow's foot injector pipe sockets. Supplied in a storage case.
£111.67Price
Contains the tooling required to set and lock the engine along with a tensioner locking pin on Ford 1.6 EcoBoost engines. Includes a time-saving crankshaft pulley alignment tool. Camshaft locking tool is included which has to be used to set and lock the camshafts into their timing position when the variable valve timing sprockets have to be removed. Timing pins included are suitable for Ford...
£47.83Price
Suitable for BMW N20 and N26 2.0L engines. Use in conjunction with Model No. VSE6188 Timing Tool Kit. Supplied in a storage case with instructions.
£47.83Price