Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
592 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Contains the timing tools required to cover the belt replacement procedure for both the early and later variants of these engines. The kit includes piston positioning, camshaft and crankshaft locking tools, plus tensioner adjuster and VVT sprocket locking tool. Supplied in storage case with instructions and warning tag.
£103.69Price
Master timing tool kit for a wide range of VAG, Ford and Mitsubishi diesel engines. Suitable for 3 and 4-cylinder belt drive engines. Includes oil pump and belt tensioner locking pins. Supplied in a storage case with instructions and a warning tag.
£103.69Price
Designed to fit the new generation of Ford EcoBlue 'Panther' belt in oil diesel engines. Contains the special tooling essential for locking the engine in its timing position. Supplied in a foam tray with a warning tag and full instructions.
£103.69Price
Designed for the installation of the crankshaft trigger wheel found on Land Rover and Jaguar.
£103.69Price
£103.69Price
Enables fast and simple removal of crankshaft and auxiliary pulleys - even in a confined space. Chrome Molybdenum legs with thin jaws allow removal of pulleys with narrow tolerance between pulley and block. Supplied in storage case.
£103.69Price
Suitable for small capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.
£119.25Price
£105.29Price
Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images. Tablet design makes the image incredibly clear but also very portable. Features controls for light intensity, digital zoom and image rotation. Waterproof probe pod with IP67 rating. Powered by 2600 mAh rechargeable with 5hr working time (USB Charging cable supplied). SD card can be...
£105.29Price
£110.08Price
Designed for removing BMW 2.0, 2.5, 3.0 diesel fuel injectors from M47/M57 engines. Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. Also suitable for some Land Rover, MG and Vauxhall/Opel vehicles that share the same engine.
£110.08Price
£111.67Price
Comprising of two gauges for positive/negative and main pressure testing on low-pressure delivery fuel circuit found on common rail systems. Compatible with 9.98mm button type connection system. Suitable for use with Model No's VS555 and VS552 for those systems not supported by 9.98mm button type connections. Can be connected in situ with fuel line for real time running pressure. Quickly...
£111.67Price
£111.69Price
Features 300psi gauge with large rubber bumper. Includes extension for deep-seated plugs and flexible extension hose. Suitable for petrol engines with 10, 12, 14, 18mm spark plug threads. Supplied in storage case.
£111.69Price
£111.69Price
Suitable for five common sizes of thread. Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Includes drill bits, thread taps, stainless steel thread inserts, insert installation and lug breaking tools. Supplied in metal storage case.
£111.69Price
£114.07Price
Threaded insert repair kit for Mercedes CDi engine Injector clamping bolt. Enables a broken stud repair to be carried out with minimal dismantling. Contents: M8 x 1mm Tap, 7mm/8mm Stepped Drill, 6mm Drill, Drill Guide, Thread Insert Fitting Tool, M8 x 1mm Threaded Inserts (x5). Thread inserts available separately in packs of five.
£114.07Price
£114.07Price
Dramatically reduces cooling system refill time, without mess and without introducing air-locks. No more time consuming cooling system bleeding and no more messy spills to clean up. Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum. Complete the process by attaching the filler hose and opening the valve allowing your premixed coolant to flow...
£114.07Price
£114.08Price
Ø65mm Gauge fitted with heavy-duty cover. Tests oil pump pressure and also low oil warning devices. Fitted with quick coupling adaptors and 1.3m hose. Includes 90° coupling adaptor for limited access applications.
£114.08Price
£115.68Price
Ø59mm Gauge fitted with 250mm hose and quick connect. Scale reads from 0-21bar(0-300psi). Kit includes four extension hoses, seven plug thread adaptors from 10 to 18mm and a self-sealing quick connector. Suitable for most petrol engine cars and light commercials. Supplied in storage case.
£115.68Price
Essential tool for removing/installing the high pressure fuel pump which allows drive gear to retain its timed position when pump is removed. Supplied in a storage case with full instructions.
£117.26Price
£117.26Price
Suitable for a wide range of petrol and diesel engines fitted to Renault and Nissan vehicles. Contains a useful sump/cover separation tool.
£117.26Price
£117.27Price
Suitable for the removal of stubborn Bosch/Delphi diesel injectors. Set includes two adaptors for different removal methods. The first screws onto the injector cap and the second locates internally inside the injector allowing extra force to be used. Features a flexible joint allowing the slide hammer to be used in restricted areas. Supplied in storage case.
£117.27Price
£118.46Price
Suitable for a wide range of vehicles including some light commercial. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
£118.46Price
£118.46Price
Comprehensive set for removing Citroen/Peugeot/Fiat 2.0/2.2HDi 16v fuel injectors. Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head preventing damage to the area surrounding the injector. Supplied in storage case.
£118.46Price
£119.65Price
Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images. Tablet design makes the image incredibly clear but also very portable. Features controls for light intensity, digital zoom and image rotation. Waterproof probe pod with IP67 rating. Powered by 2600mAh rechargeable with 5 hour working time (USB Charging cable supplied). SD card can be...
£119.65Price
£210.62Price
Clutch removal/refitting tool kit designed for Ford Dual Clutch systems. Suitable for DPCS6 and 6DCT250 6-speed gearboxes fitted to Fiesta, Focus and EcoSport vehicles. Equivalent to OEM 307-675. Supplied in a storage case with instructions.
£210.62Price
£121.09Price
Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance. Clear pipes allow visual detection of any air within the fuel system or being inadvertently drawn into the fuel line. Model has a valve to work in conjunction with Ford IDS diagnostic equipment, allowing the vacuum to be monitored.
£121.09Price
Kit includes camshaft setting plates, camshaft positioning sensor alignment tools and crankshaft locking pin. Supplied in a storage case with warning tag and comprehensive instructions.
£122.84Price
Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Includes guide pins for aligning the supercharger. Supplied in storage case with instructions and a warning tag.
£122.84Price
Suitable for Vauxhall/Opel 2.0 CDTi belt drive diesel engines. Essential tools required when replacing the camshaft drive belt. Contains a flywheel locking tool required on vehicles fitted with automatic transmission. Supplied in a storage case with full instructions.
£122.84Price
£122.84Price
Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system. Kit supplied with four pairs of stepped adaptors to fit most sizes of hose. Features a pressure gauge, shut-off valve and pressure release valve. Can also be used on cooling system hoses. Supplied in storage case.
£122.84Price
£122.84Price
8L Capacity device constructed from composite materials. Suitable for the extraction of all types of engine, transmission and lubricating oils from vehicles and machinery. Also suitable for the extraction of petrol/diesel and low viscosity fluids such as water. Supplied with 1.5m main hose, with interchangeable Ø6.7 x 700mm dipstick oil probe and Ø7 x 400mm universal fluid probe. Supplied with...
£122.84Price
£122.84Price
Designed to charge the turbo/intercooler system with a low pressure of regulated workshop air to show the presence of leaks within the system. Kit supplied with three pairs of stepped adaptors to fit most sizes of hose found on heavy commercial vehicles. Features a pressure gauge, shut-off valve and pressure release valve. Supplied in storage case.
£122.84Price
£127.65Price
Pump operated oil dispensing unit with a 3L capacity. Supplied with five multipurpose and three vehicle specific automatic transmission fluid adaptors. Features a fluid control and depressurising valve.
£127.65Price