Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
771 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£56.63Price
Suitable for the removal of vehicle computer connectors and terminals. Designed for GM C3 systems, this 12-piece kit has a general application for safe and fast removal of terminals on a wide range of vehicles. Colour-coded aluminium handles make for easy identification. Supplied in storage case.
£56.63Price
Suitable for timing the camshaft and crankshaft, on chain drive 1.3 diesel engines. Set also includes a tensioner locking pin. Supplied in storage case with instructions and a warning tag.
£57.01Price
£57.41Price
Includes tools for timing the engine and locking the camshafts into position. Simple operation to set and lock the engine into its timed position. Can be used to check the valve timing. Supplied with warning tag and instructions.
£57.41Price
£57.41Price
Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off and pulse timer may be used with fuel pressure gauge. Powered by vehicle’s 12V battery.
Can be used to locate fuel system faults such as:
- Clogged or leaking fuel injectors
- Sluggish or sticky fuel injectors
- Wiring harness faults
- Fuel injector driver...
£57.41Price
£57.41Price
Lightweight, auto-ranging digital multimeter with double moulded plastic housing and a 2000 counts LCD display. Features forward facing worklight, data-hold and non-contact voltage detection. Conforms to EN 61010-1 CAT IV 600V safety standard.
Measures:
• AC and DC Voltage
• AC and DC Current
• Resistance
• Diode Test
• Continuity Test
• Non-Contact Voltage Detection (NCVD)
• Forward Facing...
£57.41Price
£58.22Price
One-person operation, suitable for turning the engine over for various diagnostic tasks such as compression testing. Connects to the starter system with push-button activation. Features a connectivity LED and 1.5m cable.
£58.22Price
£59.58Price
All steel construction with large soft grip handles. Quick change hardened and tempered jaws to suit insulated and non-insulated terminals. Ratchet action ensures consistent crimping.
£59.58Price
£59.82Price
Cap type filter wrenches, made from 7 and 16 gauge steel will withstand up to 115Nm (85lb.ft) of torque. Designed to grip like sockets, thereby minimising the possibility of crushing filters. Electro-black oxide finish for rust protection. Use with 3/8" or 1/2"Sq drive wrenches. Supplied in storage case.
£59.82Price
£60.62Price
Locate and isolate ECU signal faults fast. Noid and idle air control valve indicator lights test for control signal from ECU. Simply disconnect harness and plug in appropriate light to see if the component is being fed a trigger signal. Set includes 1.3m fibre optic cable to allow light to be viewed from the driver's seat. Simple-to-use and has a wide vehicle application.
£60.62Price
£61.24Price
Durable case and integral stand suitable for the toughest workshop conditions. Large, high-contrast LCD display with 34mm high digital read-out. Includes over-range indication, auto-zeroing, data-hold, auto-polarity, auto-power-off and low battery display functions. Supplied with capped test probes and K-type thermocouple.
£61.24Price
£61.40Price
Long reach tool designed for awkwardly positioned button clips found on fuel circuits, power steering, brake fluid, air conditioning and gear boxes. Flexible cable and compact head help operation in confined spaces.
£61.40Price
Engine and transmission dipsticks for checking oil level. This comprehensive set is compatible with a large selection of vehicles in the Mercedes range. Engines ranging from 1988 to 2005. Transmissions ranging from 1996 to 2006. The dipstick is a service tool, therefore must be removed after the fluid has been checked.
£61.40Price
£61.40Price
Designed to rotate crankshaft on MAN commercial vehicles via flywheel ring gear.
£61.40Price
Camshaft setting and flywheel locking tools to cover BMW M47/TU/T2 and M57/TU/T2 diesel engines used in BMW, Land Rover, MG/Rover and Vauxhall/Opel models. Supplied in storage case.
£87.75Price
Stretch belt fitting kit for Ford and Volvo. Time-saving tool designed for use when universal tools will not work due to the wider crankshaft pulley which restricts access. One part of the kit clips over the crankshaft pulley to guide the belt, the other part fits over the water pump pulley, and by using a 17mm socket, is simply rotated until the belt is located correctly on all the pulleys....
£72.57Price
Comprehensive timing tool kit for 2.0D, 2.2D and 2.4D Duratorq chain driven diesel engines fitted in Citroen, Fiat, Ford, Jaguar, Land Rover, LDV and Peugeot vehicles. Kit includes sprocket retaining plates for both early and later engines and access cover removal tools for injection pump removal/installation. Supplied in storage case with a warning tag.
£62.20Price
Suitable for setting and locking Alfa Romeo, Fiat and Lancia complete range of 1.6D, 1.9D, 2.0D JTD and Multijet engines as well as 2.4D 10v and 20v JTD. Kit contains flywheel holding tool to remove/install crankshaft pulley, crankshaft locking tool and camshaft setting tools. Supplied in storage case with instructions and a warning tag.
£62.20Price
Essential tool required when removing the cylinder head/camshafts on VAG Pumpe Duse and common rail diesel engines. Set comprises camshaft sprocket hub holding tool and hub remover.
£62.20Price
Suitable for timing belt replacement on the 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault, Vauxhall/Opel and Dacia vehicles. These engines will require the use of a Camshaft Sprocket Holding Tool, to loosen the camshaft sprocket bolts. Kit features camshaft setting plate which avoids the camshaft position sensor on later 1.4 and 1.6 engines.
£62.20Price
Comprises camshaft setting tools and belt tensioner locking pins. Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport petrol engines with belt drive. Supplied in a storage case with instructions and a warning tag.
£62.20Price
Includes locking tools for 1.0, 1.2, 1.4 EcoTec/EcoFLEX (codes X and Z) chain engines. Also includes the timing disc position gauge for the timing sensor on the inlet camshaft. Supplied in storage case with instructions and a warning tag.
£62.20Price
£62.20Price
Professional low cost tool saves all the vehicle settings to prevent loss and expensive reprogramming not just for radio codes but for immobilisers, traction control, engine management and satellite navigation. Bright, easy-to-read LEDs for at-a-glance confirmation of connection. Can be used with any existing booster packs with a vehicle accessory power socket or even vehicle-to-vehicle.
£62.20Price
Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 and Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work.
£103.69Price
£64.03Price
Save time and money and take the guesswork out of your fault-finding and diagnosis. Allows interrogation of the vehicle’s ECU to determine the performance of essential emission-based information, to read and clear Diagnostic Trouble Codes (DTCs) and to obtain vital performance data from the vehicle’s engine and transmission (Petrol 2000 onwards and Diesel 2003 onwards).
£64.03Price
£96.51Price
Designed for both petrol and diesel vehicles, to retrieve excess fuel from fuel lines before maintenance. Eliminates the risk of fuel spills and damage to pipes if clamped. Supplied with quick release connectors, commonly found on PSA and Vauxhall/Opel vehicles, plus two universal connectors for older vehicles.
£96.51Price
Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.
£66.04Price
£66.20Price
Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds. May be used with feeler gauges for high precision work. Made from Carbon Steel. Features peg hole for easy storage. Supplied with protective edging for when not in use.
£66.20Price
High precision auto-ranging multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Features temperature measurement capability, max./data hold and auto-power-off function. Double moulded housing with soft grip case and large display for ease of use. Practical probe, lead storage and integral upright stand for use...
£66.20Price
American-style drop tester. Polarity protected cables - impossible to damage unit by incorrect connection. Load applied by internal switchgear - no sparking! Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.
£66.66Price
£66.98Price
Composite cased Xenon timing light with inductive impulse pick-up. 8000rpm Maximum. Measures timing advance range 0-60° BTDC. Supplied with 1.5m coiled 12V power lead, inductive coupler and operating instructions.
£66.98Price